Talon2020
Ordered. Should be here tomorrow via next day air. Figure if I'm already spending this much on a GPU, an extra $60 isn't much. 

Agreed 

enewt, 
 
Thanks a ton for your help with this list and the advice to all. I placed my KPE order with EVGA sales' help (Missed my window, I was early on in the list but they sent me a new one today). Much much appreciated!

Cjdowd80
Going to ask this here as the community in this thread is responsive and been super helpful over the last month or so ... With me getting my KPE on Thursday, and still getting over my bricked 3090 Hybrid from last night (into my brothers PC), was wondering if anyone plans to run aftermarket fans or setups on the rad? Where the Rad is going in my O11-D XL case, i have 3x ML120 fans, and wasn't sure how i can use those. I noticed on the hybrid card last night, the fans connected to a header from the pump/GPU. If i am leaving the EVGA fans off, and go with the Corsair ML120 fans on the rad instead, would i just not use the cable for fan headers coming from pump, and go directly into my commander pro like they are now? Any help is appreciated, just curious how it'll work and what everyone's plans are. Thanks

I have a similar setup (O11 XL) and Corsair ML120 fans.  I plan on putting the Kingpin Rad in the front/side mount with the Kingpin fans in a push configuration then the Corsair ML120s in a pull configuration on the other side.  Then I have the 3 ML120s on the bottom as intake, and the H150i with 3 ML120s for output on the top, and 1 ML120 for output on the back.  I'll set a custom fan curve for the Kingpin Corsair fans in iCue.  
 
I haven't tested it yet but i believe you should be able to mount the rad like this and still put the side cover on :   (Inside case) ML120|Radiator|CaseWall|Kingpin Fans (Exterior of Case) 

Stickboy46

Cjdowd80
Going to ask this here as the community in this thread is responsive and been super helpful over the last month or so ... With me getting my KPE on Thursday, and still getting over my bricked 3090 Hybrid from last night (into my brothers PC), was wondering if anyone plans to run aftermarket fans or setups on the rad? Where the Rad is going in my O11-D XL case, i have 3x ML120 fans, and wasn't sure how i can use those. I noticed on the hybrid card last night, the fans connected to a header from the pump/GPU. If i am leaving the EVGA fans off, and go with the Corsair ML120 fans on the rad instead, would i just not use the cable for fan headers coming from pump, and go directly into my commander pro like they are now? Any help is appreciated, just curious how it'll work and what everyone's plans are. Thanks

I have a similar setup (O11 XL) and Corsair ML120 fans.  I plan on putting the Kingpin Rad in the front/side mount with the Kingpin fans in a push configuration then the Corsair ML120s in a pull configuration on the other side.  Then I have the 3 ML120s on the bottom as intake, and the H150i with 3 ML120s for output on the top, and 1 ML120 for output on the back.  I'll set a custom fan curve for the Kingpin Corsair fans in iCue.  
 
I haven't tested it yet but i believe you should be able to mount the rad like this and still put the side cover on :   (Inside case) ML120|Radiator|CaseWall|Kingpin Fans (Exterior of Case) 

 
Still waiting for the spectre 3 that was delayed .its been a month already 

order placed
 
Email received @ 9:25 AM
 
 

sormaz
I decided to pass and let mine go to the next person in line.
 
Have an hour left to change my mind, but that is unlikely

That’s what I did with the 3090 FTW3 Ultra Hybrid when my email came. I was already in queue for this and wanted to wait for the Big Boi.

sormaz
I decided to pass and let mine go to the next person in line.
 
Have an hour left to change my mind, but that is unlikely

Must have been a tough decision. Good luck with the card you end up with!

Stickboy46

Cjdowd80
Going to ask this here as the community in this thread is responsive and been super helpful over the last month or so ... With me getting my KPE on Thursday, and still getting over my bricked 3090 Hybrid from last night (into my brothers PC), was wondering if anyone plans to run aftermarket fans or setups on the rad? Where the Rad is going in my O11-D XL case, i have 3x ML120 fans, and wasn't sure how i can use those. I noticed on the hybrid card last night, the fans connected to a header from the pump/GPU. If i am leaving the EVGA fans off, and go with the Corsair ML120 fans on the rad instead, would i just not use the cable for fan headers coming from pump, and go directly into my commander pro like they are now? Any help is appreciated, just curious how it'll work and what everyone's plans are. Thanks

I have a similar setup (O11 XL) and Corsair ML120 fans.  I plan on putting the Kingpin Rad in the front/side mount with the Kingpin fans in a push configuration then the Corsair ML120s in a pull configuration on the other side.  Then I have the 3 ML120s on the bottom as intake, and the H150i with 3 ML120s for output on the top, and 1 ML120 for output on the back.  I'll set a custom fan curve for the Kingpin Corsair fans in iCue.  
 
I haven't tested it yet but i believe you should be able to mount the rad like this and still put the side cover on :   (Inside case) ML120|Radiator|CaseWall|Kingpin Fans (Exterior of Case) 

I have  the O11 Dynamic XL myself. I have the ML120 fans as well and they are awesome fans. I went with the RED LED ML120's since i was just going for a certain color theme on my build. My plan is to go push/pull on the KPE RAD too. I will mount mine in the back side, mounting the RAD on the other side of the case so the pull fans are mounted through the case to the RAD. If i don't, i will run into a issue some have in that on my MSI board, the front panel USB 3 cable will be in the way due to the USB 3 header on my MB is right in the way preventing push/pull if i mount the KPE RAD on the inside part of the back mounting point.

I have PWM fan splitters i am going to test first so i will have 6 RAD fans connected to the card itself and control the speed from there through X1. If i don't like it, i have a commander Pro and Commander Core i can use and do it through iCue.

NotoriouS^
Anyone get a tracking number yet?

I got my tracking number via UPS My Choice. It notified me of a pending delivery a few hours after I made my order.

wodell757
Order placed and preparing shipping is the last email I got.  Hope by the end of the week.  .50 sec club.
Sorry enewt I used Nereus's Associate code.  As I told him I would in the 3090Ftw3 post for helping me in there.  
But hats off too you and thanks for the updates here.
 
System
I9 10900k Asus Tuf z490 32 gigs ddr4-4266 1tb 980pro NVMe ssd 1tb WB black sn750 NVMe Evga CLC 360 cooler Asus Tuf RTX 3080 O10G Gamin
EVGA SuperNOVA 1600 T2

Congratulations on your card!  Thanks for the kind words.  No worries about using another's code, just so long as you use somebody's Associate’s Code for the 5% discount.  Enjoy your KPE! 

gian1983
i think you get  tracking only if you select overnight 

No, I don't think that is right.  I've ordered other items from EVGA before and even for small items, I've received tracking info.  It just tends to be a little later.  I wouldn't worry unless 9 pm PT rolls around and you haven't received a tracking number yet (assuming you got your order in before 2 pm PT which is EVGA's internal cutoff). 

LinS123

NotoriouS^
Anyone get a tracking number yet?

I got my tracking number via UPS My Choice. It notified me of a pending delivery a few hours after I made my order.

Well pooooop, i just logged into my UPS My Choice to check but nothing there yet. I did the 2 day air option. 

Congratulations on the newest round of card getters! 

Literally just got my shipping information from UPS about 2 minutes ago for my delivery tomorrow.
 
Hopefully everyone else gets there's shortly as well.
 
 

NetSiege
Literally just got my shipping information from UPS about 2 minutes ago for my delivery tomorrow.
 
Hopefully everyone else gets there's shortly as well.
 
 

Same here