I think EK is one that does 98%+ full on their AIO loops.  Could be wrong doe.
 
New round of lil' heatsinks will be here Tuesday for the backplate areas of my card - these are 20 x 20 x 10mm so much larger than the ones I have now, without being "too big". I figure 5 on the back VRM & 4 on the front VRM, then the other pack I'm getting I'll replace some of the silver ones I already have, and add other areas.
Trying to get as much of it near heat-creating components as I can, without going overboard.  With how much just the bit of heatsinks I have has positively effected my vRAM temps thus far, I'm looking forward to the results when I add more dissipation.

electrosoft
Here is mine. Hope it helps.
 
Queued:
 
12/16/2020 9:43:08 AM PT Yes
 
I was sent my notification:
 
This email is being sent in response to your request to be notified with availability updates for product 24G-P5-3998-KR and this product was marked as being in stock on 1/25/2021 at 9:52 AM PST.
 
and purchased it same day within the window

Welcome to this side of the world brother.

Adding mine to the list, hope i didnt sign up to late
Date Entered 1/14/2021 12:15:59 AM PT
Notify Sent No

dullrazor1
Adding mine to the list, hope i didnt sign up to late
Date Entered 1/14/2021 12:15:59 AM PT
Notify Sent No

Added. You are currently #76. Good luck!

Here's mine, not exactly sure how it's working here.

08G-P5-3665-KR 12/31/2020 8:23:16 AM PT No

Adding mine in, hopefully the hydrocopper one comes out soon too!


2/7/2021 11:19:39 AM PT

Add my entry to the queue please. Still no notify as of yet and anxiously waiting! 
Part Number: 24G-P5-3998-KR
Date / Time entered: 1/2/2021 3:25:37 PM PT 
Notify sent: No

Azulier
Add my entry to the queue please. Still no notify as of yet and anxiously waiting! 
Part Number: 24G-P5-3998-KR
Date / Time entered: 1/2/2021 3:25:37 PM PT 
Notify sent: No

Thanks for participating in the tracking project; You are currently #68. Best of luck!

Cross your fingers!

Toieo
Time to get a load out the door... my position has done nothing but drop for weeks T.T
 
100 will clear the (unofficial) queue, come on EVGA 100 cards really isn't that many! :D

100 units on the next drop.  That seems high to me.  I was thinking more like 50 to 75 units and I would imagine that the folks that have signed up for our tracking project do not represent more than 50% of the total registrants in a similar timeline....  But I really like your idea better.

enewt

Toieo
Time to get a load out the door... my position has done nothing but drop for weeks T.T
 
100 will clear the (unofficial) queue, come on EVGA 100 cards really isn't that many! :D

100 units on the next drop.  That seems high to me.  I was thinking more like 50 to 75 units and I would imagine that the folks that have signed up for our tracking project do not represent more than 50% of the total registrants in a similar timeline....  But I really like your idea better.

hey now! Let me live my fantasy

kraade
I am using the Cooler Master vertical gpu mount and Cable because it had the best looking build quality, the sliding mount is a little gimmicky but its solid and beefy enough.

I was thinking of buying the EK vertical mount that lifeisshort117 mention earlier in this thread.  It looks pretty sturdy:
 
https://www.ekwb.com/shop...op-vertical-gpu-holder

flyingtoaster85

alha

DZelmer
Don't forget about the Chinese new years shutting every thing down for a week i always forget about that. I'm hoping for a drop next week fingers and legs crossed

From what I remember hearing from Steve over at GN recently, actually the Lunar New Year shutdown can run from a week to a month, depending on location. I think he said Taiwan was about a week, but in China it can run up to a month, because ppl go back home to their provinces, and only historically only a certain percentage of them return to back work afterwards, which then can cause more delays I'd have to think due to training and such. Not to be a negative Nancy, but kind of like the saying back in the day about Detroit made cars that were built on a Mon or Fri, I'd ideally try to avoid products from China made around that time frame, though hopefully QA would catch the duds. Not that we have much choice in the matter now due to the crunch of availability of course.

Kingpins are made in Taiwan.

Taiwan is China too.

Toieo

mech9t5

kraade
I am using the Cooler Master vertical gpu mount and Cable because it had the best looking build quality, the sliding mount is a little gimmicky but its solid and beefy enough.

I was thinking of buying the EK vertical mount that lifeisshort117 mention earlier in this thread.  It looks pretty sturdy:
 
https://www.ekwb.com/shop...op-vertical-gpu-holder

Not a concern?
 
Edit: copy/paste a screengrab resulted in about a mile worth of code getting generated, removed and attached

If your referring to the supplied EK riser cable, than yes.  I'm lookin at the Linkup 4.0 riser cable, but do not know if it is compatible (screw hole size and location) and it's damn expensive.

Slackaveli

flyingtoaster85

alha

DZelmer
Don't forget about the Chinese new years shutting every thing down for a week i always forget about that. I'm hoping for a drop next week fingers and legs crossed

From what I remember hearing from Steve over at GN recently, actually the Lunar New Year shutdown can run from a week to a month, depending on location. I think he said Taiwan was about a week, but in China it can run up to a month, because ppl go back home to their provinces, and only historically only a certain percentage of them return to back work afterwards, which then can cause more delays I'd have to think due to training and such. Not to be a negative Nancy, but kind of like the saying back in the day about Detroit made cars that were built on a Mon or Fri, I'd ideally try to avoid products from China made around that time frame, though hopefully QA would catch the duds. Not that we have much choice in the matter now due to the crunch of availability of course.

Kingpins are made in Taiwan.

Taiwan is China too.

Fortunately for prospective Kingpin owners, The U.S. government disagrees that Taiwan is China, as Taiwan is not subject to Chinese tariffs.