Okay I have enough I need the support team to escalate this issue.
 
Problem: The GPU fan speed up periodically (Totally erratic, sometimes in every minute, sometimes 10-15minutes passes and nothing, while game is constantly running, no change in performance/consumption) to 100% then goes back to the set amount in Precision X1. The Speed up is not reflected or recorded by the Precision X1 application at all (See attached screenshot). The fans speed up, gpu doesn't reach 80Degrees, I check the fan speed and it is on 60%. This is either firmware bug or software. NEED TO FIX, THIS IS A LONG-GOING ISSUE!
 
Details:
Mem Clock +150Mhz
GPU Clock +80Mhz (I can set to 100+ too, though some games freezing with 100 so I stick to 80+ mostly)
Voltage +100
Power 112%
GPU Temp 83
General Fan speed set to 60% OR I tried with 70% and 75%, still the above issue occurs. See screenshot from my settings. Also uploaded The Temp Tuner that the system set (I DIDN'T CHANGE THIS, ITS AUTOMATICALLY SET BASED ON SETTINGS, BEFORE ANYONE WOULD SAY DOWN-CLOCK AND ****).
 
In-game, the stupid fun goes up to 100% for like 5seconds, then goes down. Alt-Tab out from game, and I see the following degrees and fan speed %, see attached screenshot.
 
 
 

As I have stated, If I'm using a stock setup, on the software, there is no speedup of the fans. Only when there is some tweaking of the gpu. The issue is not that the card couldn't handle the tweak and I would see the overheating and the fans speeding up. The issue is that there is no visible heat up and no fan speed change shows on the software.
 
AS I'VE STATED IT. If this wouldn't be a software issue, then in the software I should see the fan speed climb up to 100% isn't it?

Under normal load I don't have this problem.
I've reset my precision x1 settings to default. I've rased some parameters but not drastically. The issue isn't happening.
So when I set the GPU speed to a certain amount (+100 in this case) then I experience this weird speedup.