EVGA
Prev Thread
Next Thread

My First Oc

Author
Post
Essentials Only Full Version
satircal
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 5/14/2009
  • Status: offline
  • Ribbons : 0
Wednesday, May 04, 2011 1:35 AM (permalink)
This is my first oc I want to push it more later in time and was wondering if all my setting look good for stability
 
My Setting
 
Mother Board ( EVGA X58 E-758)                                                     

Bios ( 80 )                                                                                                   
 CPU (I7 920)              

Memory ( OCZ OCZ3G1600LV6GK DDR3 PC3-12800 1600 MHz Gold XTC 6GB Triple Channel)
PSU ( Corsair CMPSU-750TX)
GPU ( ati radeon Hd 4890 )
Drivers ( Latest )                                                                                                
Operating System ( Windows 7 64 Ultimate )


Frequency Control
CPU Clock Ratio ( 20 )                                                                                        
CPU Host Frequency (Mhz) ( 181 )                                                                     
MCH Strap ( auto )
CPU Uncore Frequency (4352Mhz) ( 24 X )                                               
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )

Memory Feature       
Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( 2:8 )                                                               
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( 2.5G )
tCL Setting ( 9 )
tRCD Setting ( 9 )
tRP Setting ( 9 )
tRAS Setting ( 25 )
tRFC Setting ( 74 )
tREF Setting ( Auto )
Command Rate ( 1T )


Voltage Control
EVGA VDroop Control ( w/o VDroop )
CPU VCore ( 1.26250 )                                                                                              
CPU VTT Voltage ( +125 )
CPU PLL VCore ( Auto )
**IOH PLL VCore ( Auto ) ( 1.8)
DIMM Voltage ( 1.650 )
DIMM DQ Vref ( +0mV )
QPI PLL VCore ( 1.250v )
IOH VCore ( Auto )( 1.1 )
IOH/ICH I/O Voltage ( Auto )( 1.5 )
**VTT PWM Frequency ( 250 KHZ )
**CPU PWM Frequency ( 800 KHZ )
**CPU Impedance ( Less )
**QPI Signal Compensation ( Less )
ICH VCore ( Auto )( 1.05)



CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Disable )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.800 Gt/s)
OC Recovery ( Disabled )

#1

1 Reply Related Threads
    KMoore4318
    Pistoj Doulos Unum Pluribus
    • Total Posts : 13863
    • Reward points : 0
    • Joined: 12/4/2008
    • Location: Atlanta, Ga
    • Status: offline
    • Ribbons : 238
    Re:My First Oc Wednesday, May 04, 2011 1:44 AM (permalink)

    with a 2:8 memory multaplier and 181 clocks your pushing your memory at 1448, you might be able to get by with a 1.5 memory DimmV there, 1.65 is called for for 1600, with a 2:8 memory multaplier your uncore must be at least 16X your showing 24X, But if it's stable, , might as well keep it, a 24X would be needed with a 2:12 memory multaplier, but with that you would have your memory well over 2100, The only two ways you can confirm stability is LinX or IBT, or Folding and compleating Work units without fail, I can not telll you stability by looking at your settings. But if you are i'd be suprised with a uncore > 4000.  
    If your looking for some OC information here are some links.
     

    [link=http://hothardware.com/Articles/Intel-Core-i7-Overclocking--A-HotHardware-HowTo/]http://hothardware.com/Ar...--A-HotHardware-HowTo/
    *
    http://www.maximumpc.com/article/features/ultimate_core_i7_overclocking_guide_we_push_nehalem_its_limits?page=0%2C0[/link]
    *
    How to Overclock the I7 (Ported): http://forums.evga.com/fb.ashx?m=7528

    post edited by KMoore4318 - Wednesday, May 04, 2011 7:49 AM

      
    Just clink Link to Register >  My Affiliate Code:VTJPDC4OMB 
    1)965 V-8  E761(77)
    2)980X AX1200 E760(77) 980 ti
    3) E770 (77)2(590) SLI AX1200 
    4) X299 FTW K, 9980XE 2 2080 supers on AX1200
    #2
    Home » All Forums » [EVGA Motherboards] » All Other EVGA Motherboards » My First Oc
    Jump to: