EVGA
Prev Thread
Next Thread

How to set SR-2 bios to boot from LIKE "PEG2"?

Author
Post
Essentials Only Full Version
maqboot
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 9/9/2010
  • Status: offline
  • Ribbons : 0
Sunday, May 08, 2011 12:30 AM (permalink)
Hello there!
How to set SR-2 bios to boot from LIKE other board "PEG2" or "PCIX16-2" and put FIRST card in the second PCIe slot?
Thanks!
#1

1 Reply Related Threads
    RetiredProfessor
    Superclocked Member
    • Total Posts : 165
    • Reward points : 0
    • Joined: 9/25/2010
    • Location: USA
    • Status: offline
    • Ribbons : 5
    Re:How to set SR-2 bios to boot from LIKE "PEG2"? Sunday, May 08, 2011 4:31 PM (permalink)
    The SR-2 motherboard does not have BIOS settings for switching between PCI-e and PCI control.  The SR-2 was designed with a point-to-point architecture and, probably, only supports booting from PCI-e graphics card.  If you are having problems, perhaps you should describe your system components in detail. Which graphics card do you have? Also describe any other cards installed in the PCIe slots, the operating system, etc.
    post edited by RetiredProfessor - Sunday, May 08, 2011 8:30 PM

    Switchable single-dual CPU rig
    Mobo: EVGA SR-2 w/ BIOS A46 or A49 & Windows 7 (64-bit edition). CPU: Xeon 5620 @2.40-2.66 GHz (single mode) & @3.3-3.5 GHz (dual mode), air cooled by Intel BXSTS100C heat sink. Memory: 12x1 GB Kingston Triple Channel 1.5-V DDR3 @ 1066 MHz with 7-7-7-20 timing. Video card: MSI GTX 460. PSU: 950-Watt ABS Majesty 80 Plus Certified Gold. Disks: OCZ Vertex2 & WD Black 1 TB. Case: Home-made from wood & aluminum mesh with mobo mounted on MountainMod tray. Comment: Every watt saved reduces the electricity bill & need for additional cooling solutions
    #2
    Home » All Forums » [EVGA Motherboards] » All Other EVGA Motherboards » How to set SR-2 bios to boot from LIKE "PEG2"?
    Jump to: