EVGA
Prev Thread
Next Thread

X58 Overclock - Should I change Any Settings?

Author
Post
Essentials Only Full Version
JLewis187
iCX Member
  • Total Posts : 498
  • Reward points : 0
  • Joined: 5/15/2008
  • Status: offline
  • Ribbons : 0
Saturday, September 03, 2011 6:35 PM (permalink)
Hi guys i have a x58 3sli with 6gb XMS3 Ram at 9-9-9-24-74-1t - single gtx 570, pcie soundblaster x-fi. and about 6 hard drives with 2 of them being sata 3.

I7 930 oced at 4.0ghz.  IM wondering
About these voltages in the pictures should i change any or leave them the way it is.
Thanks. 
 
I know the computers stable, im mainly wondering about ioh ich though it just seems like slower/chumpier then it should be.
post edited by JLewis187 - Saturday, September 03, 2011 6:40 PM

Attached Image(s)

#1

6 Replies Related Threads
    loveha
    Omnipotent Enthusiast
    • Total Posts : 10302
    • Reward points : 0
    • Joined: 9/26/2009
    • Location: Beulah Michigan
    • Status: offline
    • Ribbons : 65
    Re:X58 Overclock - Should I change Any Settings? Saturday, September 03, 2011 6:41 PM (permalink)
    Could bring the CPU PLL Vcore back to Auto or lower it to 1.65v. No need to ever raise that unless you are doing a really big overclock.
    Other than that, if you are LinX stable on All for 20 Passes or 12-24 Hours Prime95 stable then your good.

    Case - Phanteks Enthoo Evolv X
    Mobo - EVGA X570 FTW
    CPU - AMD Ryzen 9 5900X
    RAM - 32GB Trident Z Royal 3600MHz 14-14-14-34
    GPU - EVGA RTX 3080 Ti FTW3 Ultra Gaming
    PSU - Seasonic Prime TX-1000
    Heatkiller IV CPU Waterblock / Heatkiller V GPU Waterblock
    Heatkiller V EBC Active Backplate / Two Heatkiller Rad 360 L
    Six Noctua NF-A12x25 / Heatkiller D5 Pump
    #2
    JLewis187
    iCX Member
    • Total Posts : 498
    • Reward points : 0
    • Joined: 5/15/2008
    • Status: offline
    • Ribbons : 0
    Re:X58 Overclock - Should I change Any Settings? Saturday, September 03, 2011 6:44 PM (permalink)
    but what about the ioh and ich
    should i leave them there..
    the ram should it be at 1.65.. when its on 1.63 in bios it saids 1.65
    also the QPI pll should i lower that or leave it at 1.35?
     
    Is S1 suspsend correct or should i put it on S3 or the other?
     
    maximum payload size at 512.. should i put on 4096 or lower it?
    Also the Memory Low Cap - I have a GTX 570 Single made by galaxy What should i set it to .. auto or 1.5g or 2g?
    post edited by JLewis187 - Saturday, September 03, 2011 6:49 PM
    #3
    loveha
    Omnipotent Enthusiast
    • Total Posts : 10302
    • Reward points : 0
    • Joined: 9/26/2009
    • Location: Beulah Michigan
    • Status: offline
    • Ribbons : 65
    Re:X58 Overclock - Should I change Any Settings? Saturday, September 03, 2011 6:52 PM (permalink)
    JLewis187

    but what about the ioh and ich
    should i leave them there..
    the ram should it be at 1.65.. when its on 1.63 in bios it saids 1.65
    also the QPI pll should i lower that or leave it at 1.35?

    Is S1 suspsend correct or should i put it on S3 or the other?

    maximum payload size at 512.. should i put on 4096 or lower it?
    Also the Memory Low Cap - I have a GTX 570 Single made by galaxy What should i set it to .. auto or 1.5g or 2g?

    The other voltages are fine, You could probably lower the QPI PLL. Wouldn't hurt to try and then do 20 passes of LinX.
    As far as the S States, I don't use Sleep. So couldn't help you there. For one GPU, Leave the Memory Low Gap on Auto. ONLY time you mess with that is if you start to experience missing memory issues. Also leave the Maximum Payload size at the default setting. Doesn't really do much for you.

    Case - Phanteks Enthoo Evolv X
    Mobo - EVGA X570 FTW
    CPU - AMD Ryzen 9 5900X
    RAM - 32GB Trident Z Royal 3600MHz 14-14-14-34
    GPU - EVGA RTX 3080 Ti FTW3 Ultra Gaming
    PSU - Seasonic Prime TX-1000
    Heatkiller IV CPU Waterblock / Heatkiller V GPU Waterblock
    Heatkiller V EBC Active Backplate / Two Heatkiller Rad 360 L
    Six Noctua NF-A12x25 / Heatkiller D5 Pump
    #4
    JLewis187
    iCX Member
    • Total Posts : 498
    • Reward points : 0
    • Joined: 5/15/2008
    • Status: offline
    • Ribbons : 0
    Re:X58 Overclock - Should I change Any Settings? Saturday, September 03, 2011 7:01 PM (permalink)
    would a missing memory issue have anything to do with... im in orgimmar everything is fine running at 60fps then allllll of a sudden out of no where i get this thing where it drops my fps loww then it pops up and its normal agian.. its not a power supply issue i had another one when i was rmaing my old one and it still happend.. and i am also 100% 20passes true.. any idea what that could be?
    Like 60fps ... fineeeee slam 30fps for 5 secs...... then lil while later back up at 60and fine.
    #5
    JLewis187
    iCX Member
    • Total Posts : 498
    • Reward points : 0
    • Joined: 5/15/2008
    • Status: offline
    • Ribbons : 0
    Re:X58 Overclock - Should I change Any Settings? Saturday, September 03, 2011 7:42 PM (permalink)
    Thanks for the advice tho man
    i bought cpu pll to 1.65
    and qpu pll to 1.25
    dram to 1.63
    ioh to 1.75
    ich to 1.75
    threw ioh/ich on auto instead of 1.5
    Its running coool and smoothe now i think i was overvolting the hell outta it.. when i failed some of the 20x linx somtimes i uped the cpu and qpi which i didnt need to do im guessen.  SO now its running solid and cool and quiet, thanks for the advice.
    #6
    Crusheddream
    FTW Member
    • Total Posts : 1985
    • Reward points : 0
    • Joined: 11/6/2009
    • Location: Central NY
    • Status: offline
    • Ribbons : 12
    Re:X58 Overclock - Should I change Any Settings? Saturday, September 03, 2011 8:59 PM (permalink)
    JLewis187

    would a missing memory issue have anything to do with... im in orgimmar everything is fine running at 60fps then allllll of a sudden out of no where i get this thing where it drops my fps loww then it pops up and its normal agian.. its not a power supply issue i had another one when i was rmaing my old one and it still happend.. and i am also 100% 20passes true.. any idea what that could be?
    Like 60fps ... fineeeee slam 30fps for 5 secs...... then lil while later back up at 60and fine.


    This is a bug in the WoW coding they know about and do not intend to fix it.  I know because i made a post about it and they erased i called them and was told its  a known bug that is not being worked on.  I was further warned to not post about it anymore.  Blizzard is a horrible company now that activision owns it.
     
    as for your voltages ICH 1.15 IOH 1.2.  ICH may need to go 1.175 ,1.2 due to the amount of HDDs.   usually you can get away with 1.1 IOH Vcore for a single card.

     

    #7
    Home » All Forums » [EVGA Motherboards] » All Other EVGA Motherboards » X58 Overclock - Should I change Any Settings?
    Jump to: