EVGA
Prev Thread
Next Thread

Issue with OCCT v3.1.0

Author
Post
Essentials Only Full Version
KingLeo
iCX Member
  • Total Posts : 268
  • Reward points : 0
  • Joined: 2/8/2007
  • Location: Kingsville, tx.
  • Status: offline
  • Ribbons : 1
Monday, January 31, 2011 0:12 PM (permalink)
I can't finish 2 min of testing (cpu: occt or cpu: Linpack) without it shuting down telling me "cpu too hot! Real temp 3.67 hottest core reads 68c 
I can prime for a hour or 20pass if IBT with temps never hitting 77c
tried uninstalling/ reinstalling with same results.
 




sorry about pic size still trying to get used to this techpowerup tool.

   
 
Gigabyte P67-UD7 - I7 2600k - 2 EVGA 570'S - Corsair Vengeance 16gb 1600
NZXT PHANTOM (WHITE) -Corsair AX1200
#1

4 Replies Related Threads
    awalleyeguy
    CLASSIFIED Member
    • Total Posts : 2604
    • Reward points : 0
    • Joined: 10/27/2007
    • Location: Next door to Elvis
    • Status: offline
    • Ribbons : 12
    Re:Issue with OCCT v3.1.0 Monday, January 31, 2011 1:30 AM (permalink)
     Well I just did a quick run (15min) and did not have you issue.
    2 of the 3 graphs you picture show your CPU at 90c or higher. What is your setting for max CPU temp? Mine is default of 80c. BTW I ran using same chip as you.

    Attached Image(s)



    HEAT  

    url=https://www.evga.com/associates/default.aspx?associatecode=U4WBM7JX3CJE24C][/url]
    #2
    KingLeo
    iCX Member
    • Total Posts : 268
    • Reward points : 0
    • Joined: 2/8/2007
    • Location: Kingsville, tx.
    • Status: offline
    • Ribbons : 1
    Re:Issue with OCCT v3.1.0 Monday, January 31, 2011 1:41 AM (permalink)
    default 80c ...also its only showing 3 cores?

     

       
     
    Gigabyte P67-UD7 - I7 2600k - 2 EVGA 570'S - Corsair Vengeance 16gb 1600
    NZXT PHANTOM (WHITE) -Corsair AX1200
    #3
    awalleyeguy
    CLASSIFIED Member
    • Total Posts : 2604
    • Reward points : 0
    • Joined: 10/27/2007
    • Location: Next door to Elvis
    • Status: offline
    • Ribbons : 12
    Re:Issue with OCCT v3.1.0 Monday, January 31, 2011 2:00 AM (permalink)
      Yeah and my CPU is at 15360. So I am thinking occt will need a update to work properly with sandy bridge. Also showing you voltages way off. Doesn't even show mine.  Doesn't show any cores for me.
     

    post edited by awalleyeguy - Monday, January 31, 2011 2:07 AM

    Attached Image(s)



    HEAT  

    url=https://www.evga.com/associates/default.aspx?associatecode=U4WBM7JX3CJE24C][/url]
    #4
    KingLeo
    iCX Member
    • Total Posts : 268
    • Reward points : 0
    • Joined: 2/8/2007
    • Location: Kingsville, tx.
    • Status: offline
    • Ribbons : 1
    Re:Issue with OCCT v3.1.0 Monday, January 31, 2011 2:07 AM (permalink)
    ok, well i guess i will keep my eyes open for updates. Thanks for confirming its not just my install. 

       
     
    Gigabyte P67-UD7 - I7 2600k - 2 EVGA 570'S - Corsair Vengeance 16gb 1600
    NZXT PHANTOM (WHITE) -Corsair AX1200
    #5
    Home » All Forums » [Computer Hardware & Software] » Overclocking Lab » Issue with OCCT v3.1.0
    Jump to: