i have the tridents 16000cl9d and they do 2200 at rated timings and volts no problems.. i have not tried to mess with them as far as sub timings yet as i have only had my board for a little while.. this is what i have ran on them 9,9,9,24 or 27 1t rest on auto 1.65 v at 2200..

im looking at these guys http://www.newegg.com/Product/Product.aspx?Item=N82E16820145267 . im thinking of using 2 of the 4 until i reach my max O/C and then dropping the other 2 in when im done playing

can the p55 ftw run ddr3 memory at 1.8volts? or is it made just to run 1.65volts and below. I want to reuse my ddr3 ram on my 790i ftw board. Help.

loften

the voltage option goes all the way up to 2.60 in my ftw bios..

My next question is, can the cpu handle that overclock (i7 860)?

i do not have a 860 so i don't know what one will do yet.. pretty much every set up is different and some clock better then others with lower volts.... i have no problem going above 4.0 on my 750 with my ftw. i feel this ftw board is pretty solid..  4.4 takes about 1.41 cpu and 1.21-1.22  vtt. on a warm cali day my load temps start to get close to 80 degrees on my water cooling set up.. i have not ran it there for more then 3-4 hours of prime 95 blend, a few other bench mark tests and a couple hours of gaming.. i think i need a second 320 radiator if i want to leave it there or try to go any higher.. i like it at 4.0, it stays nice and cool i don't need much more then 1.28-1.30 cpu volts to run it there.... i like that my memory can do 2200 if i want..  it gives me some room to play..