CDdude55
New Member
- Total Posts : 45
- Reward points : 0
- Joined: 8/30/2007
- Status: offline
- Ribbons : 0
Tuesday, September 14, 2010 8:24 PM
(permalink)
Hey, I have two blue 12'' cold cathodes and im not sure what i should do with them. My side panel isn't transparent, so i don't see much of a point in putting them in there, i know there is a clear side panel for my case, but i already went through trying to order it and long story short, i am unable to get it delivered to my address. I also don't have the space or tools to go about cutting my own window in my current side panel. So, what should i do with these two 12'' cold cathodes? :)
Core i7 920 @3.5Ghz EVGA X58 SLI (E758) 6GB Patriot Vipers 1333Mhz EVGA Geforce GTX 470 WD Velociraptor 300GB Corsair TX850w Windows 7 Home Premium 64-bit
|
boredgunner
Over 9000!
- Total Posts : 12561
- Reward points : 0
- Joined: 7/18/2008
- Location: Лиманск-13
- Status: offline
- Ribbons : 79

Re:What to do with these Cold Cathodes?
Tuesday, September 14, 2010 8:28 PM
(permalink)
Whatever floats your boat.
|
Bowenac
CLASSIFIED Member
- Total Posts : 4900
- Reward points : 0
- Joined: 10/26/2007
- Location: Puget Sound WA State
- Status: offline
- Ribbons : 17

Re:What to do with these Cold Cathodes?
Tuesday, September 14, 2010 8:38 PM
(permalink)
Put them behind your monitor.
|
mnparadox
SSC Member
- Total Posts : 927
- Reward points : 0
- Joined: 3/20/2009
- Location: Minnesota
- Status: offline
- Ribbons : 6

Re:What to do with these Cold Cathodes?
Tuesday, September 14, 2010 9:02 PM
(permalink)
You could drill a few holes in the bottom of your case, put them inside and use them for "underglow".
|
boredgunner
Over 9000!
- Total Posts : 12561
- Reward points : 0
- Joined: 7/18/2008
- Location: Лиманск-13
- Status: offline
- Ribbons : 79

Re:What to do with these Cold Cathodes?
Tuesday, September 14, 2010 10:05 PM
(permalink)
mnparadox You could drill a few holes in the bottom of your case, put them inside and use them for "underglow". Not a bad idea. Reminds me of what those ricers do with their cars.
|
Nahte27
FTW Member
- Total Posts : 1582
- Reward points : 0
- Joined: 3/20/2009
- Location: Oklahoma
- Status: offline
- Ribbons : 9

Re:What to do with these Cold Cathodes?
Wednesday, September 15, 2010 1:12 AM
(permalink)
mnparadox You could drill a few holes in the bottom of your case, put them inside and use them for "underglow". You may not even have to drill if you're ok with just hanging the wires out an empty PCI slot. You could also hang them on the back of your case, and illuminate the wall behind your rig!
|
CDdude55
New Member
- Total Posts : 45
- Reward points : 0
- Joined: 8/30/2007
- Status: offline
- Ribbons : 0
Re:What to do with these Cold Cathodes?
Wednesday, September 15, 2010 1:51 AM
(permalink)
Some pretty good ideas.
Core i7 920 @3.5Ghz EVGA X58 SLI (E758) 6GB Patriot Vipers 1333Mhz EVGA Geforce GTX 470 WD Velociraptor 300GB Corsair TX850w Windows 7 Home Premium 64-bit
|
NordicJedi
EVGA Forum Moderator
- Total Posts : 8086
- Reward points : 0
- Joined: 7/17/2007
- Status: offline
- Ribbons : 77

Re:What to do with these Cold Cathodes?
Wednesday, September 15, 2010 9:54 AM
(permalink)
Moving this over to Mods Rigs for more ideas.
|
mnparadox
SSC Member
- Total Posts : 927
- Reward points : 0
- Joined: 3/20/2009
- Location: Minnesota
- Status: offline
- Ribbons : 6

Re:What to do with these Cold Cathodes?
Wednesday, September 15, 2010 1:30 PM
(permalink)
boredgunner mnparadox You could drill a few holes in the bottom of your case, put them inside and use them for "underglow". Not a bad idea. Reminds me of what those ricers do with their cars. I wonder if http://www.riceornice.com/ will add a PC section at some point...
|
Hugh Jass
SSC Member
- Total Posts : 983
- Reward points : 0
- Joined: 10/29/2008
- Location: Los Angeles, CA
- Status: offline
- Ribbons : 3

Re:What to do with these Cold Cathodes?
Wednesday, September 15, 2010 3:48 PM
(permalink)
Bowenac Put them behind your monitor. That's what I would do, it adds a nice ambient blue aura. these are LED lights but you'll receive the same results
EVGA X58 E758 i7 930 4.2GHz EVGA GTX 660 heatWare
|
Fendulon
iCX Member
- Total Posts : 353
- Reward points : 0
- Joined: 1/4/2007
- Status: offline
- Ribbons : 0

Re:What to do with these Cold Cathodes?
Wednesday, September 15, 2010 3:52 PM
(permalink)
Back of the monitor would be pretty neat, as would underglow. It kind of depends where your desk and computer is at, and if the computer is on carpet and what not.
Mobo: EVGA e760 x58 Classified CPU: Intel Core i7 920 @ 4.4hz GPU: EVGA GTX 570 HD RAM: 12gb Corsair XMS3 DDR3 1600mhz PSU: In Win Commander 1200w Case: Custom Black Walnut Case HDDs: 10.25tb for storage and 2x Corsair Force GT 120gb in Raid 0 Sound Card: HT Omega Striker 7.1 Water Cooling: Swiftech Apogee XT, Koolance Classified Blocks, 2x Feser X-Changer 360, MCP-355 OS: Windows 7 Ultimate x64
|
CDdude55
New Member
- Total Posts : 45
- Reward points : 0
- Joined: 8/30/2007
- Status: offline
- Ribbons : 0
Re:What to do with these Cold Cathodes?
Wednesday, September 15, 2010 9:30 PM
(permalink)
NordicJedi Moving this over to Mods Rigs for more ideas. Thanks. :) Very good ideas guys.
Core i7 920 @3.5Ghz EVGA X58 SLI (E758) 6GB Patriot Vipers 1333Mhz EVGA Geforce GTX 470 WD Velociraptor 300GB Corsair TX850w Windows 7 Home Premium 64-bit
|
Re:What to do with these Cold Cathodes?
Thursday, September 16, 2010 3:24 AM
(permalink)
Anything you do will look good!
|