EVGA
Prev Thread
Next Thread

First build Case Trouble

Author
Post
Essentials Only Full Version
giftochaos
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2/18/2010
  • Status: offline
  • Ribbons : 0
Tuesday, August 10, 2010 1:44 AM (permalink)
Ok so I bought all the stuff for my first computer and now that it is all here I have noticed a problem with my case! It is a HAF full tower 932 and I have the x58 classified motherboard. The form factor is e-atx and so I put all the mounts in the correct places and when I attempt to mount my m-board all the holes are wrong! many of the points where there are holes to screw in on the board there is only metal on the case. Any advice? Am I doing something wrong? Here are the Tiger Direct product codes.

Case: C283-1187
M-board: E145-2058
#1

6 Replies Related Threads
    _Havoc_
    FTW Member
    • Total Posts : 1242
    • Reward points : 0
    • Joined: 8/2/2009
    • Status: offline
    • Ribbons : 6
    Re:First build Case Trouble Tuesday, August 10, 2010 1:53 AM (permalink)
    Well the Classified 760 should fit, and I know it does since I have a 760 Classified and my 1st case was an HAF 932.

    Main Rig
    Intel 13900K| EKWB 360 AIO|Asus Strix Z790-E|32GB G.Skill Ripjaws 6000|RTX 3080 FE|EVGA Supernova 1300 G2| Samsung 970 Evo + 2TB|Samsung 960 500GB| Lian-Li Lancool 3
     Overclock.net : _Killswitch_
    Heatware: http://heatware.com/eval.php?id=71778
    #2
    giftochaos
    New Member
    • Total Posts : 3
    • Reward points : 0
    • Joined: 2/18/2010
    • Status: offline
    • Ribbons : 0
    Re:First build Case Trouble Tuesday, August 10, 2010 1:58 AM (permalink)
    got some help with it. Found out the final row of screws was extraneous so I finally figured it out
    #3
    KMoore4318
    Pistoj Doulos Unum Pluribus
    • Total Posts : 13863
    • Reward points : 0
    • Joined: 12/4/2008
    • Location: Atlanta, Ga
    • Status: offline
    • Ribbons : 238
    Re:First build Case Trouble Tuesday, August 10, 2010 2:19 AM (permalink)
    Glad you figured it out, I have a 758 in a HAF 932 and a 760 in a HAF 932, so I know they work. Did you use the paper guide that comes with the board. it has the stand-off locations marked.

      
    Just clink Link to Register >  My Affiliate Code:VTJPDC4OMB 
    1)965 V-8  E761(77)
    2)980X AX1200 E760(77) 980 ti
    3) E770 (77)2(590) SLI AX1200 
    4) X299 FTW K, 9980XE 2 2080 supers on AX1200
    #4
    patchesanook
    CLASSIFIED Member
    • Total Posts : 3607
    • Reward points : 0
    • Joined: 2/4/2006
    • Location: in a cave in west virginia
    • Status: offline
    • Ribbons : 9
    Re:First build Case Trouble Tuesday, August 10, 2010 2:31 AM (permalink)
    my haf932 came with a sheet for stand off lay out



    #5
    HRPuffnstuff
    FTW Member
    • Total Posts : 1324
    • Reward points : 0
    • Joined: 11/30/2007
    • Status: offline
    • Ribbons : 4
    Re:First build Case Trouble Tuesday, August 10, 2010 3:24 AM (permalink)
    Yep my haf 932 and e760 go great together.

    MSI MEG Z790 ACE, Intel i9 13900k, G.Skill Trident Z5 RGB 32gb 6600, ARCTIC Liquid Freezer III 420 ARGB in push/pull, Gigabyte RTX 4090 Gaming OC, EVGA Nu Audio, Samsung 990 & 980 Pro's, WD SN850X & Black hdd, FSP Hydro PTH Pro 1350W PS, Windows 11 Professional, Thermaltake Level 20 XT w/Antec Prizm X 120mm argb fans
     
     
    #6
    emersj
    FTW Member
    • Total Posts : 1120
    • Reward points : 0
    • Joined: 12/24/2009
    • Location: Dallas, Texas
    • Status: offline
    • Ribbons : 1
    Re:First build Case Trouble Tuesday, August 10, 2010 12:32 AM (permalink)
    yeah make sure you use some good pressure against the back panel since it does get a little snug with the insualtion there but otherwise it fit beautifully in the case when i installed it

    Core i7 920 D0 @ 4.2Ghz 
    Corsair H70  
    CM HAF 932 10-120mm Red LED fans
    EVGA E760 Classified
    Mushkin Redline 12Gb 1600mhz 6-8-6-18
    Corsair HX1000 PSU
    EVGA GTX470
    EVGA GTX275 1792MB
    2-60GB Mushkin Callisto Deluxe in RAID0 (550/510 read/write)
    3 - 1TB WD Black
    2 - 500GB WD Black

    #7
    Home » All Forums » [EVGA Motherboards] » All Other EVGA Motherboards » First build Case Trouble
    Jump to: