EVGA

Z590 Dark Build (No VCore Status Light) Various Debug Codes

Author
Post
Essentials Only Full Version
akicelander
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2023/04/29 18:00:43
  • Status: offline
  • Ribbons : 0
2024/11/04 07:15:26 (permalink)
Forum,
I was finishing up some stress tests on a new build (z590) dark with 11900K cpu all updates and bios are current and after 4-5 days I booted the PC and the VCORE Status light is not on. MEMTEST86 passed and GPU was putting out a decent score on Heaven Bench Test as well as Cinebench R23.  I cannot get into the Bios and the closest I got was was the EVGA bios home screen but it will not let me past that spot.
 
I put a new m.2 drive and tried to reload Windows and it would not install all the way and had a pop up that said as much.  CMOS reset will get me back to the bios home screen but as I stated, clicking on anything does not work.  I do have enough supplies on the shelf to put in a new CPU and I have another z590 motherboard to swap parts around, but that is a last resort.  The most common debug codes are: 25, 26 and then it finally comes to rest at 24.  D7 pops up momentarily but goes away after 5 seconds.
 
It ran great for about for 5 days but the only thing I am not positive on is if the VCORE Status light (2nd one from the left at the top of the mobo) was never on to begin with.
 
z590 Dark
G.Skill 4400 DDR4
11900K
1300 GT Evga PSU
3090 FE
 
Thanks
Gary
#1

5 Replies Related Threads
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 31062
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 123
    Re: Z590 Dark Build (No VCore Status Light) Various Debug Codes 2024/11/04 13:01:36 (permalink)
    FAQ # 59363 Motherboard Debug Post Codes
    RE Debug code:  --->>>You should only care about the Code it Stops On
     
    1) I'd double check that new M.2 is properly / fully installed ..... seems to be your last change.  It is always possible you bumped something?
     
    2) If you get back to BIOS, Make sure you turn Fast Boot OFF
     
    3) With all power removed, removing any sticks of RAM - should force the BIOS
     
    4) Use your BIOS switch, test on another possition
     
    5) Flashing BIOS, always possible BIOS became corrupted, things happen
     
     

    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

    Older RIG projects RTX Project  Nibbler


     When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
    #2
    akicelander
    New Member
    • Total Posts : 12
    • Reward points : 0
    • Joined: 2023/04/29 18:00:43
    • Status: offline
    • Ribbons : 0
    Re: Z590 Dark Build (No VCore Status Light) Various Debug Codes 2024/11/05 06:43:25 (permalink)
    Thanks Cool GTX suggestions...I'll post any updates, maybe a few days due to work schedule.
    #3
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 31062
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 123
    Re: Z590 Dark Build (No VCore Status Light) Various Debug Codes 2024/11/05 12:37:08 (permalink)
    happy to Help & I look forward to your update once you get a chance to test
     
     
    The EVGA Z590 Dark Motherboard Review: For Extreme Enthusiasts

    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

    Older RIG projects RTX Project  Nibbler


     When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
    #4
    akicelander
    New Member
    • Total Posts : 12
    • Reward points : 0
    • Joined: 2023/04/29 18:00:43
    • Status: offline
    • Ribbons : 0
    Re: Z590 Dark Build (No VCore Status Light) Various Debug Codes 2024/11/08 06:56:54 (permalink)
    Just a quite update Cool GTX, did everything but flash bios with no change (changed motherboard components (RAM or m.2) automatically takes you to a pop up for yes to enter setup or no.  Click "yes" and still gets stuck on that page, (used bios #2).  Will do the bios flash, but moving this to my open bench-table for ease of troubleshooting.
     
     
     
    post edited by akicelander - 2024/11/09 08:12:40
    #5
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 31062
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 123
    Re: Z590 Dark Build (No VCore Status Light) Various Debug Codes 2024/11/09 13:29:31 (permalink)
    akicelander
    Just a quite update Cool GTX, did everything but flash bios with no change (changed motherboard components (RAM or m.2) automatically takes you to a pop up for yes to enter setup or no.  Click "yes" and still gets stuck on that page, (used bios #2).  Will do the bios flash, but moving this to my open bench-table for ease of troubleshooting.
     
     
     


    Thanks for the update, good luck on the bench test

    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

    Older RIG projects RTX Project  Nibbler


     When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
    #6
    Jump to:
  • Back to Mobile