EVGA
Prev Thread
Next Thread

One piece, sleeved pci-e power cables for RTX

Author
Post
Essentials Only Full Version
geforce10
iCX Member
  • Total Posts : 363
  • Reward points : 0
  • Joined: 4/21/2008
  • Status: offline
  • Ribbons : 4
Sunday, August 01, 2021 10:42 PM (permalink)
Hello everyone! Wanting to do some wire management and looking for some quality pci-e cables that are sleeved and one piece (if they make them) for my RTX 3080ti FTW card.
I really wish EVGA would make the PowerLink again. I used it for my 1080ti and loved it.
Wondering if any of you can give me some suggestions on some that have worked well for you. Thanks for your time!

EVGA Z-590 FTW, EVGA RTX 3080ti FTW3 Ultra  Core i9 11900K, 32GB Corsair Dominator Platinum DDR4 4000MHz, EVGA DG-86 Case, EVGA SuperNOVA 850G3 ,Corsair 420mm H170i Elite LCD AIO, 1TB WD SN850 NVME,  2TB WD SN750 NVME, 1TB Samsung 860 EVO SSD, 1.5TB WD Black HDD, Logitech Z5500 5.1 THX, Logitech G910 Keyboard, Corsair Dark Core Pro Mouse, Acer X34P G-SYNC 3440X1440 Curved Display @ 120Hz, Windows 10 Pro
#1

4 Replies Related Threads
    ObscureEmpyre
    SSC Member
    • Total Posts : 979
    • Reward points : 0
    • Joined: 1/15/2012
    • Status: offline
    • Ribbons : 7
    Re: One piece, sleeved pci-e power cables for RTX Sunday, August 01, 2021 10:52 PM (permalink)
    What do you mean by “one piece?” Do you
    Mean non-Y/daisy chain cables? If so, check out CableMod or even EVGA had some individually-sleeved kits last I checked.


    #2
    geforce10
    iCX Member
    • Total Posts : 363
    • Reward points : 0
    • Joined: 4/21/2008
    • Status: offline
    • Ribbons : 4
    Re: One piece, sleeved pci-e power cables for RTX Sunday, August 01, 2021 11:12 PM (permalink)
    I didn’t know the proper word for it, but I did check out cable mods and they call it “Bridged”. Basically all three, 8 Pin cables are joined tight together, with combs. I just got to figure out how long I need them, and order them. Thanks for the advice! Never knew about the cable mod site before and it looks like they have exactly what I want! Thanks again

    EVGA Z-590 FTW, EVGA RTX 3080ti FTW3 Ultra  Core i9 11900K, 32GB Corsair Dominator Platinum DDR4 4000MHz, EVGA DG-86 Case, EVGA SuperNOVA 850G3 ,Corsair 420mm H170i Elite LCD AIO, 1TB WD SN850 NVME,  2TB WD SN750 NVME, 1TB Samsung 860 EVO SSD, 1.5TB WD Black HDD, Logitech Z5500 5.1 THX, Logitech G910 Keyboard, Corsair Dark Core Pro Mouse, Acer X34P G-SYNC 3440X1440 Curved Display @ 120Hz, Windows 10 Pro
    #3
    kevinc313
    CLASSIFIED ULTRA Member
    • Total Posts : 5004
    • Reward points : 0
    • Joined: 2/28/2019
    • Status: offline
    • Ribbons : 22
    Re: One piece, sleeved pci-e power cables for RTX Sunday, August 01, 2021 11:46 PM (permalink)
    Imho you should be able to obtain some textile sleeving of appropriate size and feed all three existing cables through it with the connectors still on, the stuff expands quite a bit.  Stagger the connectors as you feed the cables.  Then just tuck the unfinished end under.  You can also get a fairly clean look by bundling with small black zip ties.
     
    Bundling power wires together can be a concern for heating up too much, but if you're under 200w per cable it's probably going to be OK, maybe.
    post edited by kevinc313 - Sunday, August 01, 2021 11:52 PM
    #4
    Nazarus
    iCX Member
    • Total Posts : 252
    • Reward points : 0
    • Joined: 3/3/2019
    • Location: Upstate NY
    • Status: offline
    • Ribbons : 6
    Re: One piece, sleeved pci-e power cables for RTX Monday, August 02, 2021 2:21 AM (permalink)
    I used Asiahorse in my latest updates.  Simple and inexpensive.  Challenge is that these use 3 PCI-E cables, so you would likely have to buy 2 kits like I did.  Just carried the rest over to my 2080ti card and cleaned up an older case.

    Associates: RQAORCJB8JNEFOB/Affiliate:  YTOQRPH9OK

    #5
    Home » All Forums » [Graphics Cards] » EVGA GeForce RTX 30 Series » One piece, sleeved pci-e power cables for RTX
    Jump to: