EVGA
Prev Thread
Next Thread

X299 Dark VROC RST/RSTe Floppy Driver

Author
Post
Essentials Only Full Version
Sultan.of.swing
Superclocked Member
  • Total Posts : 174
  • Reward points : 0
  • Joined: 12/15/2012
  • Status: offline
  • Ribbons : 3
Monday, December 07, 2020 1:57 AM (permalink)
So I am trying to setup a VROC Array using 2 intel NVME's.
Successfully configured them in the bios/created the array.
BIOS shows them as bootable.

Now to the point of having to try and fresh install windows on the array.  I get to the windows setup and to the point to load the driver but nothing is working.
Have tried both the RST and the RSTe floppy driver in the downloads for the X299 Dark.

Now currently I do not have a VROC Key as the write up specifically says that you can create a RAID 0 array without a key, Does not say whether it is bootable or not but my BIOS shows it as being bootable.
 
Is there a different RST/RSTe floppy driver I need to load during OS install?
 
 
*Edit- Finally found the right "floppy" driver and got windows installed.
post edited by Sultan.of.swing - Monday, December 07, 2020 4:08 AM
#1

1 Reply Related Threads
    Ravenmaster
    SSC Member
    • Total Posts : 747
    • Reward points : 0
    • Joined: 10/25/2008
    • Status: offline
    • Ribbons : 7
    Re: X299 Dark VROC RST/RSTe Floppy Driver Wednesday, January 06, 2021 1:38 AM (permalink)
    :EDIT:

    :Delete post:
     
    post edited by Ravenmaster - Wednesday, January 06, 2021 1:54 AM

    Asus ROG Maximus Z790 Dark Hero | Intel Core i9-14900KF | RTX 4090 FE | 2x32GB Corsair Dominator Titanium DDR5 RAM (7200mhz) | 2x Samsung 990 Pro 4TB M.2 NVMe's for main OS and backup) | Windows 11 Pro 64-bit 23H2 |Klipsch 5.1.2 Dolby Atmos speakers + Denon AVR-X2800H Receiver | LG 42" C2 OLED | EVGA ASSOCIATE CODE: JRKV0L1B1GY3ADW

    #2
    Home » All Forums » [EVGA Motherboards] » All Other EVGA Motherboards » X299 Dark VROC RST/RSTe Floppy Driver
    Jump to: