EVGA
Prev Thread
Next Thread

Strange, any overclocking of 2080TI FTW3 stalls sending work units.

Author
Post
Essentials Only Full Version
scott@bjorn3d
SSC Member
  • Total Posts : 693
  • Reward points : 0
  • Joined: 11/20/2006
  • Status: offline
  • Ribbons : 2
Saturday, November 10, 2018 9:03 AM (permalink)
It seems like anytime I modify the clocks or anything on the card it will start not sending work units.  Set everything to default reboot machine and it will work just fine.  This is so odd.


#1

6 Replies Related Threads
    scott@bjorn3d
    SSC Member
    • Total Posts : 693
    • Reward points : 0
    • Joined: 11/20/2006
    • Status: offline
    • Ribbons : 2
    Re: Strange, any overclocking of 2080TI FTW3 stalls sending work units. Saturday, November 10, 2018 1:59 PM (permalink)
    Ok this is odd, upload time seems to be the issue.  I can see in the log it is uploading it is just doing it in steps.  **** is going on?


    #2
    jinihammerer
    FTW Member
    • Total Posts : 1151
    • Reward points : 0
    • Joined: 9/20/2009
    • Location: Texas
    • Status: offline
    • Ribbons : 8
    Re: Strange, any overclocking of 2080TI FTW3 stalls sending work units. Saturday, November 10, 2018 9:52 PM (permalink)
    I will try folding with mine tomorrow now that my PC is 100% stable. I'll let you know if I see the same thing.


      My Affiliate Code: EB1-UCY-VA9N   
       


    #3
    jinihammerer
    FTW Member
    • Total Posts : 1151
    • Reward points : 0
    • Joined: 9/20/2009
    • Location: Texas
    • Status: offline
    • Ribbons : 8
    Re: Strange, any overclocking of 2080TI FTW3 stalls sending work units. Saturday, November 10, 2018 10:17 PM (permalink)
    Well decided to try tonight, overclock was too high so it dumped like 3 work orders right away.

    Uploads went up fine however lol. Backed my OC off 55 points and set memory to no overclock. I'll check it before I crash for the night.


      My Affiliate Code: EB1-UCY-VA9N   
       


    #4
    jinihammerer
    FTW Member
    • Total Posts : 1151
    • Reward points : 0
    • Joined: 9/20/2009
    • Location: Texas
    • Status: offline
    • Ribbons : 8
    Re: Strange, any overclocking of 2080TI FTW3 stalls sending work units. Sunday, November 11, 2018 11:42 AM (permalink)
    I ran F@H overnight with a +100 OC 0 on memory. I have not seen any delays on uploading. 
     
    My GPU did get a little toasty however running around 74c - 75c but that's my fault, My case is in a watercooling configuration and the cards on air, closing the windows allowed too much heat to gather in the front of the case and that only has an exhaust fan where all the cooling is in the back with the radiators, likely made me take a hit on performance. Opened the windows on the case dropped it down to highest temp of 65c
     
    It sill looks on par to be around 2.3 million ppd.
    post edited by jinihammerer - Sunday, November 11, 2018 11:45 AM


      My Affiliate Code: EB1-UCY-VA9N   
       


    #5
    Teknogroovie
    Superclocked Member
    • Total Posts : 217
    • Reward points : 0
    • Joined: 5/24/2018
    • Location: Cental, IL
    • Status: offline
    • Ribbons : 0
    Re: Strange, any overclocking of 2080TI FTW3 stalls sending work units. Sunday, November 11, 2018 3:01 PM (permalink)
    jinihammerer
    I ran F@H overnight with a +100 OC 0 on memory. I have not seen any delays on uploading. 
     
    My GPU did get a little toasty however running around 74c - 75c but that's my fault, My case is in a watercooling configuration and the cards on air, closing the windows allowed too much heat to gather in the front of the case and that only has an exhaust fan where all the cooling is in the back with the radiators, likely made me take a hit on performance. Opened the windows on the case dropped it down to highest temp of 65c
     
    It sill looks on par to be around 2.3 million ppd.


    That's awesome, hopefully you got it all figured out. 

     My Affiliate Code: LR3I6SS70W 
     
    #6
    scott@bjorn3d
    SSC Member
    • Total Posts : 693
    • Reward points : 0
    • Joined: 11/20/2006
    • Status: offline
    • Ribbons : 2
    Re: Strange, any overclocking of 2080TI FTW3 stalls sending work units. Saturday, November 17, 2018 3:03 PM (permalink)
    Ok I think I have found the culprit.  The evga software is what is causing it.  Uninstall it and problem goes away.  I am going to run for a couple of days without it just to make sure.


    #7
    Home » All Forums » [General Forum] » Folding@EVGA » Strange, any overclocking of 2080TI FTW3 stalls sending work units.
    Jump to: