hsngencer
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 7/11/2018
- Status: offline
- Ribbons : 0
hello
I apologize first for bad english.I bought amazon 1080 ti hybrid for 10 days.I'm using the card and using it.but I noticed something.I can not see the rpm even though the fan on the card turns.When the video card is switched on, the fan starts turning.the temperatures do not exceed 55 to 58.Everything seems normal.but the fan does not write rpm in the program.programs I use corsair link, nzxt cam and evga precision.I did not make a single Windows 10 format.
I need your help.everyone greetings.
|
Kbird666
Superclocked Member
- Total Posts : 150
- Reward points : 0
- Joined: 11/11/2009
- Status: offline
- Ribbons : 2
Re: evga 1080 ti hybrid ftw3 fan no rpm
Sunday, July 29, 2018 7:42 AM
(permalink)
https://www.evga.com/products/product.aspx?pn=400-HY-5698-B1 this one? If the cable to the fan only has 2 wires then there is no RPM sensing , that requires a 3 wire cable , can't really tell from the Pics but someone else will know for sure tomorrow but I am thinking the Pump's firmware controls the Fan automatically based on Temp. KB.
post edited by Kbird666 - Sunday, July 29, 2018 7:57 AM
GByte Z590 Aorus Elite AX MB + 11700K 32GB Kingston Fury DDR4 @3200mhz EVGA Nvidia RTX 3080Ti EVGA G6 850watt P.S. (3) 32" BenQ BL3200PT Monitors (CAD-WS) .
|
hsngencer
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 7/11/2018
- Status: offline
- Ribbons : 0
Re: evga 1080 ti hybrid ftw3 fan no rpm
Sunday, July 29, 2018 7:58 AM
(permalink)
the fan of my card does not turn up to 50 degrees.Turning 55 degrees then turn and the heat is fixed.there is no problem here.only the rpm value is 0.but the fan is turning.
|
hsngencer
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 7/11/2018
- Status: offline
- Ribbons : 0
Re: evga 1080 ti hybrid ftw3 fan no rpm
Sunday, July 29, 2018 8:09 AM
(permalink)
There is no problem in the form of card work.The card quickly cools down after it has left the game.and it gets quiet.The speed of the gpu boost is pretty good when viewed from the evga program.I removed the card 1080 ft ftw 3 and plugged it into a hybrid.it seems to be a software problem.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 9/20/2005
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: evga 1080 ti hybrid ftw3 fan no rpm
Sunday, July 29, 2018 9:00 AM
(permalink)
The fan you want a reading from is the power fan. That's the single fan on the hybrid cooler. You'll need to turn the on screen display for the power fan to see the rpm.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
hsngencer
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 7/11/2018
- Status: offline
- Ribbons : 0
Re: evga 1080 ti hybrid ftw3 fan no rpm
Sunday, July 29, 2018 9:19 AM
(permalink)
[quote = AHowes] Bir okuma yönü , fanıdır fanıdır . Bu, hibrit soğutucudaki tek hayran. Devir tarafından tahsis edilen fanın ekranının açılması için gerekli. [/ quote] Where should I open it?.the only fan on the card.
post edited by hsngencer - Sunday, July 29, 2018 9:23 AM
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 9/20/2005
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: evga 1080 ti hybrid ftw3 fan no rpm
Sunday, July 29, 2018 3:28 PM
(permalink)
hsngencer
[quote = AHowes]
Bir okuma yönü , fanıdır fanıdır . Bu, hibrit soğutucudaki tek hayran. Devir tarafından tahsis edilen fanın ekranının açılması için gerekli.
[/ quote]
Where should I open it?.the only fan on the card.
https://forums.evga.com/m/tm.aspx?m=2819506There is a video.. watch it. They show how to open the HWM. In there you select what to show on the OSD. Make sure the Power Fan is turned on and set to OSD in the HWM.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
hsngencer
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 7/11/2018
- Status: offline
- Ribbons : 0
Re: evga 1080 ti hybrid ftw3 fan no rpm
Sunday, July 29, 2018 4:14 PM
(permalink)
AHowes
hsngencer
[quote = AHowes]
Bir okuma yönü , fanıdır fanıdır . Bu, hibrit soğutucudaki tek hayran. Devir tarafından tahsis edilen fanın ekranının açılması için gerekli.
[/ quote]
Where should I open it?.the only fan on the card.
There is a video.. watch it. They show how to open the HWM. In there you select what to show on the OSD. Make sure the Power Fan is turned on and set to OSD in the HWM.
final responsibility my card values are normal.the temperature does not exceed 55 60.rpm in software is not a fault that the 0 show is not it?Everything except rpm 0 is working normally.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 9/20/2005
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: evga 1080 ti hybrid ftw3 fan no rpm
Sunday, July 29, 2018 4:27 PM
(permalink)
So you have all 3 fans showing in the OSD and they all show 0 RPM?
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
Kbird666
Superclocked Member
- Total Posts : 150
- Reward points : 0
- Joined: 11/11/2009
- Status: offline
- Ribbons : 2
Re: evga 1080 ti hybrid ftw3 fan no rpm
Sunday, July 29, 2018 7:18 PM
(permalink)
Looking at the Manual for the Hybrid it has a VRM Fan as well , which is connected to the Right Fan Header assuming the install instructions were followed, the Pump is connected to the Left Fan Header , perhaps the VRM one is not spinning since the Temps are below 60° which I think is the Bios default, at least I think so as it happens on my 1070Ti too , I currently use the Slave Bios to force the GPU (Left) Fan to Spin though. Does the Pump report RPM ? or does it just rely on the Pump's own Bios to control the RPM and only take power off the Fan Connector? http://www.evga.com/support/manuals/
GByte Z590 Aorus Elite AX MB + 11700K 32GB Kingston Fury DDR4 @3200mhz EVGA Nvidia RTX 3080Ti EVGA G6 850watt P.S. (3) 32" BenQ BL3200PT Monitors (CAD-WS) .
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 9/20/2005
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: evga 1080 ti hybrid ftw3 fan no rpm
Sunday, July 29, 2018 8:03 PM
(permalink)
All I know is that by default precision x oc defaults to only showing the GPU fan in the osd.
I dont even think even if you had a stock hybrid ftw3 card that pxoc will even show the correct fan in the osd.
Ftw3 has 3 fans labeled gpu,memory and power.
Not sure on the newest version but on the older version of pxoc uou had to highlight the correct fan just to show the rpm of the fan on the default face. Even with that done it still wont show the right fan on the osd unless you set up the osd correctly.
The pump is controller by the bios.. no rpm for that. People have managed to power the pump separately just to control the pump speed.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|