EVGA
Prev Thread
Next Thread

EleetX error locking up my pc

Author
Post
Essentials Only Full Version
darkskys
New Member
  • Total Posts : 14
  • Reward points : 0
  • Joined: 9/15/2006
  • Status: offline
  • Ribbons : 0
Saturday, June 30, 2018 2:48 AM (permalink)
I installed EleetX to control some Rgb strips and everytime i try to run it i get "CPU core ratio error" when i click ok or close it, it completely freezes up my pc. Now i'm not overclocked at all running everything default also gets me the error. Anyone have any guesses why this is happening?
Eleetx Version = 1.04
Motherboard = Z370 classified K
Cpu = I7 8700k
 

#1

4 Replies Related Threads
    darkskys
    New Member
    • Total Posts : 14
    • Reward points : 0
    • Joined: 9/15/2006
    • Status: offline
    • Ribbons : 0
    Re: EleetX error locking up my pc Saturday, June 30, 2018 3:31 AM (permalink)
    Well i think i fixed my own issue(sort of) if i close precision and flow control than the error still appears but when i click ok the program runs without locking up my pc, also the colors are way off if you set it to blue the lights turn red, i had to set it to dark green for a dark blue color.
    Cheap Phantek rgb light strips.
    #2
    daspirate1983
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 6/10/2017
    • Status: offline
    • Ribbons : 0
    Re: EleetX error locking up my pc Wednesday, July 04, 2018 6:59 AM (permalink)
    Same issue here with the same mobo and cpu. Worked fine for me yesterday as I was tweaking fan settings in BIOS and then monitoring fan speeds and temps. Reduced my SYS_FAN speed to 50% today and started getting the same error.
    #3
    Cordorb
    SSC Member
    • Total Posts : 531
    • Reward points : 0
    • Joined: 3/19/2007
    • Status: offline
    • Ribbons : 2
    Re: EleetX error locking up my pc Saturday, July 07, 2018 4:26 AM (permalink)
    Is it possible you are dropping the voltage to CLC or other device by not having the fan header at full voltage ?
     

     
     
    #4
    daspirate1983
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 6/10/2017
    • Status: offline
    • Ribbons : 0
    Re: EleetX error locking up my pc Friday, January 04, 2019 9:55 PM (permalink)
    Long overdue update to this, reconfigured everything the way it was before and got the same crash. Uninstalled and installed v1.03 and it just locks the PC and restarts. Unless there's a fix to this I'm pulling it and running another program in its place. Oh, noticed it's a 64 bit program but it always installs to the x86 folder. Could be the problem but it's not my problem anymore.
    #5
    Home » All Forums » [Graphics Cards] » EVGA Precision X1 » EleetX error locking up my pc
    Jump to: