EVGA
Prev Thread
Next Thread

CLC 280/Flow Control Wont Display CPU Temp

Author
Post
Essentials Only Full Version
oMekone
New Member
  • Total Posts : 31
  • Reward points : 0
  • Joined: 5/17/2007
  • Status: offline
  • Ribbons : 0
Saturday, March 03, 2018 10:51 PM (permalink)
I have tried version 2.0.2 -> 2.0.5 and none of them will display CPU temps. It also wont detect the 1080sc2 icx video card to switch led colors.
 
Running a 8700k with asrock z370 Taichi.
 
The USB is plugged into a hearder. Driver is installed and appears to be working.
 
Anyone else with this problem found a fix??
#1

4 Replies Related Threads
    icylogik
    New Member
    • Total Posts : 22
    • Reward points : 0
    • Joined: 8/18/2007
    • Location: Canada
    • Status: offline
    • Ribbons : 0
    Re: CLC 280/Flow Control Wont Display CPU Temp Monday, March 05, 2018 2:25 PM (permalink)
    I had the same problem and fixed it by switching the header that the pump plugs into from DC to PWM. Also make sure the header is set to run at full speed with no fan curves.
     
    Might not fix anything though, the software needs a lot of work.
    #2
    goto_kun
    New Member
    • Total Posts : 7
    • Reward points : 0
    • Joined: 2/20/2018
    • Location: JAPAN
    • Status: offline
    • Ribbons : 0
    Re: CLC 280/Flow Control Wont Display CPU Temp Wednesday, March 07, 2018 10:52 AM (permalink)
    I do not see fan speed.
    It is the same even if you pin the fan pin header directly into the motherboard.
    It works as a fan operation.
    I tried it with Ver 2.0.5 -> 2.0.7 but it is NG.
    I will not solve it.
    #3
    EVGA_Lee
    Moderator
    • Total Posts : 4243
    • Reward points : 0
    • Joined: 11/4/2016
    • Location: Brea, CA
    • Status: offline
    • Ribbons : 14
    Re: CLC 280/Flow Control Wont Display CPU Temp Thursday, March 08, 2018 4:10 PM (permalink)
    Did you try setting the CPU Fan header to 100%?  Some motherboards have difficulty detecting the AIO pump/fan(s) if the fan header is set to auto, Smart Fan, or less than 100%.
    #4
    goto_kun
    New Member
    • Total Posts : 7
    • Reward points : 0
    • Joined: 2/20/2018
    • Location: JAPAN
    • Status: offline
    • Ribbons : 0
    Re: CLC 280/Flow Control Wont Display CPU Temp Friday, March 09, 2018 9:39 AM (permalink)
     
    oh
    It was automatic setting when confirming with BIOS.
    The motherboard is GIGABYTE Z 370 AORUS Ultra Gaming.
    It is now displayed with full speed! Thank you!

    It is idling pump1950rpm/fan1080rpm. Is this normal?
    Previously the pump was 1500 rpm. I will use water cooling for the first time ...
    #5
    Home » All Forums » [Graphics Cards] » EVGA Precision X1 » CLC 280/Flow Control Wont Display CPU Temp
    Jump to: