EVGA
Prev Thread
Next Thread

Supernova 650 G2 Clicking

Author
Post
Essentials Only Full Version
robliveson
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 8/2/2017
  • Status: offline
  • Ribbons : 0
Wednesday, August 02, 2017 3:42 AM (permalink)
Hi, I am a first time builder and was trying to test-boot.
 
Installed CPU, Fan, two fan plugs to fan port and usb 3.0, installed ram, installed gpu. ATX and CPU cables from PSU to board, hdmi to monitor. Power on: Cpu and gpu fans spin (I was expecting to have to switch the board on). The cpu fan leds blink along with the PSU clicking in time with it. I'm mostly worried about the clicking and was afraid to leave it running for more than a few secs at a time while double checking connections.
 
I'm mostly wondering if I have either the fan or PSU plugged to the board incorrectly, or if my PSU is faulty. Probably a simple mistake, but any help would be greatly appreciated. Thanks!
Board is ASRock AB350m
#1

1 Reply Related Threads
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 85038
    • Reward points : 0
    • Joined: 10/5/2004
    • Location: Netherlands
    • Status: offline
    • Ribbons : 86
    Re: Supernova 650 G2 Clicking Thursday, August 03, 2017 8:42 AM (permalink)
    Make sure the CPU power cable is seated correctly as well as the ATX cable. Make sure whatever CPU cooler you have is connected to the correct power fan header. 

    AMD Ryzen 9 7950X,  Corsair Mp700 Pro M.2, 64GB Corsair Dominator Titanium DDR5  X670E Steel Legend, MSI RTX 4090 Associate Code: H5U80QBH6BH0AXF. I am NOT an employee of EVGA

    #2
    Home » All Forums » [Other EVGA Products] » EVGA Power Supplies » Supernova 650 G2 Clicking
    Jump to: