EVGA
Prev Thread
Next Thread

Supernova G2 750 sata port

Author
Post
Essentials Only Full Version
shmity
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 1/9/2015
  • Status: offline
  • Ribbons : 0
Wednesday, July 12, 2017 0:19 PM (permalink)
Hi Guys, 
 
I just finished setting up my G2 750 PSU and seem to be having an issue with the SATA power ports. If I plug a SATA cable into the port on the PSU closest to the PERIF port, the PSU powers up for half a second and then shuts down, i cant get it to power up again until i have switched it off and then back on, but it still will only power for half a second. If I shift the SATA cable to the port furthest from the PERIF port then the system starts as normal. Do I have a faulty PSU?
 
Case fans are plugged into the PERIF port - Antec 900 case with 1x 200mm and 3 standard case fans
SATA port has 2x HDD and 1x SSD plugged in
 
Thanks 
#1

2 Replies Related Threads
    MusterLuck
    New Member
    • Total Posts : 16
    • Reward points : 0
    • Joined: 7/6/2017
    • Status: offline
    • Ribbons : 0
    Re: Supernova G2 750 sata port Wednesday, July 12, 2017 0:31 PM (permalink)
    I would contact EVGA support, you may have a bad PSU.
     
    For your convenience:
    www.evga.com/about/contactus/
     
    #2
    Miguel_urbie
    New Member
    • Total Posts : 20
    • Reward points : 0
    • Joined: 3/13/2017
    • Status: offline
    • Ribbons : 0
    Re: Supernova G2 750 sata port Thursday, July 13, 2017 10:14 AM (permalink)
    really sounds like a faulty PSU
    now that i think. i should test all ports on mine..
    thanks, i didn't know some ports could cause issues... i thought they would end up at the same place inside
    #3
    Home » All Forums » [Other EVGA Products] » EVGA Power Supplies » Supernova G2 750 sata port
    Jump to: