DMIINC
CLASSIFIED Member
- Total Posts : 2955
- Reward points : 0
- Joined: 3/2/2007
- Location: Suwanee, GA
- Status: offline
- Ribbons : 32
Hello guys,
I did not post in long time as life is life and it gets complicated...…… anyway,
Getting X299 Micro 2 board. Thinking between 10 or 12 core 9xxx cpu. Which one of these would overclock better to higher Hz? All will be on custom water cooling loop. Just to say I was previously on i7-3770k oc'ed to 4.6 GHz for 6 years. Mid 2018 switched to Z390 mITX board and 8086k at 4.8 GHz.
Thanks all,
|
jollydet
Superclocked Member
- Total Posts : 164
- Reward points : 0
- Joined: 2/3/2014
- Status: offline
- Ribbons : 1
Re: X299 Micro 2 incoming...... Want to talk about CPUs.
Monday, July 01, 2019 11:13 PM
(permalink)
12Core is a HCC chip which means the die is bigger and its easier to cool they also tend to be better silicon. If your going to push a 12 core on the micro 2 make sure there is some decent airflow across the board as the vrm will be working hard :)
|
kosyan
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 12/2/2017
- Location: Moscow
- Status: offline
- Ribbons : 0
Re: X299 Micro 2 incoming...... Want to talk about CPUs.
Sunday, July 07, 2019 11:30 PM
(permalink)
Hello DMIINC. Delidded 7960x at 4.6 GHz all cores without AVXs offsets, mesh 3.2 GHz, on huge tasks mosfets temperature 56-68C with 100% fan speed, 24/7 on custom loop is here.
post edited by kosyan - Sunday, July 07, 2019 11:38 PM
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 85038
- Reward points : 0
- Joined: 10/5/2004
- Location: Netherlands
- Status: offline
- Ribbons : 86
Re: X299 Micro 2 incoming...... Want to talk about CPUs.
Thursday, July 11, 2019 5:07 PM
(permalink)
kosyan
Hello DMIINC. Delidded 7960x at 4.6 GHz all cores without AVXs offsets, mesh 3.2 GHz, on huge tasks mosfets temperature 56-68C with 100% fan speed, 24/7 on custom loop is here.
That's impressive.
|
DMIINC
CLASSIFIED Member
- Total Posts : 2955
- Reward points : 0
- Joined: 3/2/2007
- Location: Suwanee, GA
- Status: offline
- Ribbons : 32
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: X299 Micro 2 incoming...... Want to talk about CPUs.
Sunday, July 14, 2019 5:24 PM
(permalink)
Nice  Time to create another 
|
DMIINC
CLASSIFIED Member
- Total Posts : 2955
- Reward points : 0
- Joined: 3/2/2007
- Location: Suwanee, GA
- Status: offline
- Ribbons : 32
Re: X299 Micro 2 incoming...... Want to talk about CPUs.
Sunday, July 14, 2019 5:52 PM
(permalink)
Does EVGA x299 board bios have option for vdroop/ load line calibration? Currently at 4.80 GHz. trying to tighten down voltages.
|
zGunBLADEz
New Member
- Total Posts : 58
- Reward points : 0
- Joined: 11/26/2014
- Status: offline
- Ribbons : 1
Re: X299 Micro 2 incoming...... Want to talk about CPUs.
Sunday, July 14, 2019 8:55 PM
(permalink)
i was going to post a question but.. i might as well put it here..
i have a 7940x and i notice on dual 1080tis the first slot is running at 8x while the second slot is running at 16x.. why is that? i have enough pci lanes
|