EVGA

Help cooling my i7 930 and system

Author
MUD1031
New Member
  • Total Posts : 63
  • Reward points : 0
  • Joined: 12/1/2007
  • Status: offline
  • Ribbons : 0
Wednesday, March 17, 2010 9:11 AM (permalink)
I just recently built a new i7 system.
 
I bought an i7 930, and when with the stock cooler i was getting idle temps around 40 degrees. Now I went and bought a new megahelms cooler, and bought some Artic silver 5 and shin-etsu thermal paste. With the Artic Silver 5, I applied a small line of it, I really didn't a decrease in temps even with the megahelms, it stayed around 40 degrees idle. Now I also cleaned paste off and applied the Shin-etsu thermal paste, this time only a small drop in the center, and my temps actually are running at 50 degrees idle. I have 2 scythe s-flex fans on the megahelms in a push-pull setup, and 3 120mm fans at the top of my case exhausting air out through the top. Am I doing something wrong? Do i7 930's run very hot? Any advice? The case I have is a Corsair 800D.
#1

3 Replies Related Threads

    wb488641
    CLASSIFIED Member
    • Total Posts : 2255
    • Reward points : 0
    • Joined: 7/13/2009
    • Status: offline
    • Ribbons : 18
    Re:Help cooling my i7 930 and system Wednesday, March 17, 2010 9:31 AM (permalink)
    what is your ambient temp?

    Is that your core temp or cpu temp?



    SR-2 & 2 x5680   

    E761 & i7 920d0

     
    EVGA Affiliate Code: A2LD8L9Q7P

    HEATWARE

    #2
    MUD1031
    New Member
    • Total Posts : 63
    • Reward points : 0
    • Joined: 12/1/2007
    • Status: offline
    • Ribbons : 0
    Re:Help cooling my i7 930 and system Wednesday, March 17, 2010 4:29 PM (permalink)
    Core temp, and I haven't even overclocked it yet.
    #3
    reggiesanchez
    FTW Member
    • Total Posts : 1124
    • Reward points : 0
    • Joined: 1/26/2009
    • Status: offline
    • Ribbons : 2
    Re:Help cooling my i7 930 and system Wednesday, March 17, 2010 7:51 PM (permalink)
    make sure your mobo isnt setting your default voltage too high
    #4
    Jump to: