japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Friday, September 12, 2014 10:05 PM
(permalink)
 Sponsors    My first mod started for 3 years ago, I've picked up this habit. I am currently working in Paris (late September), but I'm already working on my new project, JP[0] Still under study and sketching. All drawings and doodles on paper, even napkins taking cafes, which is where the best ideas are translated ... Hardware
Motherboard: Asus Rampage IV Black Edition 
Micro: Intel i7-3930K
RAM: 16GB Team Xtreem DDR3 PC3-20800 2600MHz (10-12-12-31) Quad Channel kit 4x4GB
GPU (VGA): EVGA GTX 670 FTW 2Gb SLI
Case: Full personal construction in acrylic
Hot Swap: Icy Dock MB973SP-2B
Power Supply: Seasonic X1250W (SS-1250XM)
Sound Card: Asus Xonar Essence STX
Active monitors: KRK Rokit 5 G2 (x2) Liquid and Air cooling
Pumps: Swiftech MPC-355 (x2)
Top: Aquacomputer aquacover dual DDC
Reservoir: EK Multioption RES X2-250 Advanced
Block PB & CPU: EK-FB ASUS R4BE Monoblock - Acetal+Nickel
Block GPU: EK-FC680 GTX+ - Acetal (x2) + EK-FC Bridge SINGLE CSQ
Tube: Acrylico 16/12 Clear
Liquido: Mayhems X1 - Oil Black 1ltr liquid cooling
Fittings, adapters and accesories:
EK Water Blocks
EEK-HDC Fitting 16mm G1/4 - Black (x22)
EK-PSC Adapter 90? G1/4 Black (x12)
Koolance
Fitting Coupling Adapter, *Black* Male-Female, 20mm (x4)
Fitting Coupling Adapter, *Black* Male-Male (x4)
Fitting Coupling Adapter, Swiveling Male-Male (x1)
Valvula de seguridad de sobrepresion (x1)
Bitspower
Bitspower Flow Sensor Matt Black (x1)
G1/4 Matt Black CaseTop Water-Fill SET (x7)
G1/4 Matt Black IG1/4 Extender (x4)
G1/4 Matt Black Mini Dual G1/4 Extender (x10)
Bitspower G1/4 Matt Black IG1/4 Extender 15mm (x1)
Bitspower G1/4 Matt Black IG1/4 Extender 25mm BP-MBWP-C62 (x1)
Matt Black Mini Valve With Black Handle (x3)
Others
Filter(x1)
Te (x1)
Controller:
Aquaero 5 Pro w/ water block + Flow sensor "high flow" G1/4 for aquaero + RGB Module
PowerAdjust2 USB Ultra (x2)
Temperature sensors:
Ambient (x1)
Inside case (x2)
Radiator air out (x1)
In-line in/out radiators (x4)
Radiators: Alphacool NexXxoS UT60 Full Copper 360mm (x2)
Fans:
Noiseblocker NB-BlackSilent Pro 120mm PL-2 1400r.p.m. (x8)
Noiseblocker NB-BlackSilent Pro 80mm P-1 1500r.p.m. (x5)
Others: Recycled Lighting
5050 RGB LED Strips and UV Documents & GaleryAcces to documents and galery about worklog Link to Google Drive post edited by japemo - Sunday, September 21, 2014 4:59 AM
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Updates...
Friday, September 12, 2014 10:10 PM
(permalink)
Updates
1. Presentation [15/08/14]
2. Components in Sketchup [21/08/14]
3. Frame for photos [22/08/14]
4. Reservoir renders [23/08/14]
5. SAS/SATA Backplane, I chose... [24/08/14]
6. Pics of 3D Pc Case [05/09/14]
7. New Sponsor [08/09/14] 8. First package... [08/09/14] 9. Pieces & Renders... [14/09/14] 10. New Sponsor... [16/09/14] 11. Order from Highflow.nl [03/10/14]
post edited by japemo - Friday, October 03, 2014 6:39 PM
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Final Photos
Friday, September 12, 2014 10:12 PM
(permalink)
Reserved for final photos...
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Re: Final Photos
Friday, September 12, 2014 10:14 PM
(permalink)
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Re: Final Photos
Friday, September 12, 2014 10:15 PM
(permalink)
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Re: Final Photos
Friday, September 12, 2014 10:18 PM
(permalink)
I take ideas from FrozenQ and I apply After playing with mouse...
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Re: Final Photos
Friday, September 12, 2014 10:20 PM
(permalink)
Hi!!! I like 2 models SAS/SATA Backplanes. Raidsonic IB-543SSK (ICY BOX) by leds, grill and full black body. But I chosen the ICY DOCK MB973SP-2B by USBs (so I avoid having to put one and cut case) and secondly because I do not need key to open. The pc will be home and will be use by me. Other models: - StarTech HSB3SATSASBA - Kingwin KF-0331-BK - iStartUSA BPN-DE230SS-BLACK - Orico 6203SS Specifications of ICY DOCK MB973SP-2BICY DOCK FlexCage MB973SP-2B Tray-less 3 x 3.5" HDD in 2 x 5.25" Bay SATA Cage - Front USB 3.0 Hub Model Number : MB973SP-2B Color : Black Drive Fit : 3.5“ SATA 1.5 / 3 / 6 Gbit/s hard drive x 3 Drive Bay : 5.25" half height device bay x 2 Host Interface : 7 pin SATA port x 3 Power Input : 4 pin power port x 2 or 15 pin power port x 2 (w/ included 4 to 15 pin adapter cables) Transfer Rate : Up to 6Gb/sec. (depending on hard drive speed) Insert & Extract connection via : Direct SATA hard drive connection Front Panel Contents : LED power button (Indicator) x 3 USB 3.0 Hub (2 Ports) Adjustable fan speed control (High/Low/Auto) Structure : Aluminum body w/ partial plastic Drive Cooling : Removable rear outtake fan w/ aluminum heat dispersion Cooling Fan Type : 80mm ball bearing fan with 2 or 3 pin connector Power Indicator : Blue LED HDD Access Indicator : Flashing blue LED Dimension (L x W x H) : 8.27” x 5.75” x 3.35” Weight : 1.99 lbs Photos   
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Re: Final Photos
Friday, September 12, 2014 10:21 PM
(permalink)
Good night. Finally finished shape the box. Everything you see in the pictures is methacrylate, any components or screws. It has taken time to design without resorting to metal profiles for joint panel. The holes you see inside is because it is smoked gray acrylic. The lines you see on grills are for out grills and clean Decimflex mesh incorporated. Top & low Front & back  Sides  Isometrics   Regards!!!
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Re: Final Photos
Friday, September 12, 2014 10:22 PM
(permalink)
Hi I come with a great news.... Yes Sires, Noiseblocker up to this travel, Thanks!!! Regards!!!
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Re: Final Photos
Friday, September 12, 2014 10:24 PM
(permalink)
More udates!!! First package.. Regards
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Final Photos
Friday, September 12, 2014 11:00 PM
(permalink)
Cool, if I may ask what tool did you use to draw your computer components?
|
japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Re: Final Photos
Friday, September 12, 2014 11:19 PM
(permalink)
Hi!!!
Pc Case, reservoir, fittings, radiators, DualTop DDC 100% AutoCAD, other components I rescue from sktechup gallery. But this have problem with dimensions, not real and I have to modify to reality...
Now I´m modeling all water cooling. After I will layout for send to manufacturers to give me price to construc... Surprise jejejeje I hope that price isn´t very hight. If not I will change to plan B.
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Final Photos
Friday, September 12, 2014 11:28 PM
(permalink)
Thanks for the info.
For a lot of Koolance products they provide 3D Model files or .step files.
|
japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Re: Final Photos
Friday, September 12, 2014 11:31 PM
(permalink)
Yes I know, thanks!!!
In grabcad.com I take some models too... step.
I take somes models. Other with dimension from Bitspower.com.tw I draw, Is very simple. It is only for sample and modeling, after count material, Is very dificult do error, is posible, but low.
Regards!!!
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Count material & renders...
Monday, September 15, 2014 0:14 PM
(permalink)
Hi Here (Google Drive) you have the foreground of the box. Count of materials and parts separately. Excludes RL, it's just the box with screws. And finally, the renders. I'm not professional and they are my first render ever. So do not criticize me a lot. If you see white spots, called "fireflies", is a problem and render noise from Indigo, is not it the coated methacrylate.
As you see in the picture below, all grids (including those above) will have filters Decimfilter stuck inside and will be able to get clean.
Below you will see out that I have adapted the system used Lianli in some of their boxes, leaving the PCIs cards directly aligned with the wall of the box. This is an exterior view and fixing system of PCIs. will be able to get clean.
Pump and drain system
The tank with the trim. The deposit is transparent but has been inadvertently icing. FrozenQ also has deposits and are very handsome. It is a possibility that I wont. Sand the tank and tube to give a glazed appearance.
Inside front window
The latest images are noticed more poor quality (no more than 15 minutes pulling the render), but it is very late and go to sleep.
Regards !!!
post edited by japemo - Monday, September 15, 2014 4:08 PM
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Re: Count material & renders...
Tuesday, September 16, 2014 12:20 AM
(permalink)
Good news, I have new and very good sponsor.... A lot of thanks to this group, quality and good persons!!!!
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Re: Count material & renders...
Sunday, September 28, 2014 10:08 PM
(permalink)
Updates. Components and fans from Noiseblocker  
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
japemo
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 10/3/2012
- Location: España
- Status: offline
- Ribbons : 1
Re: Count material & renders...
Friday, October 03, 2014 6:38 PM
(permalink)
Hi!!! Updates from... Thanks to  Rads Supports from XSPC  10 adapters male-male  3 valves  7 fillports  Adapters  Filling funnel  Tube border grinding  New flow sensor/indicator. With rear 3 pin connector 3 pines. For Aquaero/Aquasuite you need set to 86 imp/l. Confirmed by Bitspower shopservice.   Splitters 5 fans / 3 pins...  I'm very surprised from great quality of Bitspower accesories... Regards!!!
Cooltek UMX3|AsRock X99E-ITXac|i7-5930K|???|M.2 500GB|SSD 750GB|HDD 3TB|RAM 32GB (16x2GB) 3200MHz|Corsair SF600|Logitech G710+|Razer Taipan|Dell U3415W|W10 Pro|WC CUSTOM
|
Sleinous
CLASSIFIED ULTRA Member
- Total Posts : 7663
- Reward points : 0
- Joined: 6/12/2010
- Location: France
- Status: offline
- Ribbons : 32
Re: Count material & renders...
Sunday, October 26, 2014 7:34 PM
(permalink)
Interested to see how this shapes up!
|
LCRava
SSC Member
- Total Posts : 572
- Reward points : 0
- Joined: 10/23/2005
- Status: offline
- Ribbons : 8
Re: Count material & renders...
Monday, October 27, 2014 1:47 AM
(permalink)
MY AFFILIATE CODE: X6EXZ64PSH "I don't always GAME in 4K, but when I do, I prefer 4 TITANS" 
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 85038
- Reward points : 0
- Joined: 10/5/2004
- Location: Netherlands
- Status: offline
- Ribbons : 86
Re: Count material & renders...
Monday, October 27, 2014 6:58 AM
(permalink)
Looks like some very good pre-build planning pics.
|