Horvat
CLASSIFIED Member
- Total Posts : 3067
- Reward points : 0
- Joined: 6/16/2009
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Tuesday, October 15, 2013 11:33 AM
(permalink)
Couldn't find anything in the help guides on configuring a current gpu folding setup. Would someone please point me there? Thanks.
FYI currently running mixed cards; 400 and 600 series and looking to purchase 700 series.
|
Xantac
FTW Member
- Total Posts : 1021
- Reward points : 0
- Joined: 3/11/2012
- Location: affiliate UEBNIR5MIA
- Status: offline
- Ribbons : 2
Re: GPU folding again
Tuesday, October 15, 2013 3:03 PM
(permalink)
- Rig 1: Rampage5/w 6850K g.skill 3200 cas15 16gb, High-speed PC HPTX Bench w/ GTX 980
- Rig 2: RIVE/3930k /w Koolance mobo/cpu blocks/16gb 2133 c9, EVGA 1080 Ti Sli EK Nickel Blocks & a 78MH/s Eth
- Rig 3: asus rog crosshair vii hero (wi-fi)/2600x, g.skill 3200 cas15 16gb, gt 730
- Acer Predator Monitor
- Xantac's Heatware
|
notfordman
Omnipotent Enthusiast
- Total Posts : 8772
- Reward points : 0
- Joined: 8/10/2007
- Location: In a van, down by the
- Status: offline
- Ribbons : 28
Re: GPU folding again
Tuesday, October 15, 2013 9:06 PM
(permalink)
|
Horvat
CLASSIFIED Member
- Total Posts : 3067
- Reward points : 0
- Joined: 6/16/2009
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re: GPU folding again
Wednesday, October 16, 2013 4:57 AM
(permalink)
OK I am still using the FAH tracker V2. Should I get rid of it and set up like in the link above?
|
Hockyman
iCX Member
- Total Posts : 352
- Reward points : 0
- Joined: 11/19/2009
- Status: offline
- Ribbons : 0
Re: GPU folding again
Wednesday, October 16, 2013 5:31 AM
(permalink)
Yeah, V7 lets you get the new core 17 and the QRB work units.
 Affiliate Code: QGF2PINGMQVTC: Vk3NYURbCMmGBPPxcfk5jjsCrKKqCmZJpHLTC: LZeTnZjFvn6Eqa3V2deZS5GNNyq93KxbK6BTC: 1CMo5BL6HQyiebkfbNRsBZ5oumqpC6mCPF
|
Horvat
CLASSIFIED Member
- Total Posts : 3067
- Reward points : 0
- Joined: 6/16/2009
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re: GPU folding again
Thursday, October 17, 2013 4:50 AM
(permalink)
Got V7 up and running. Too tired to figure out how to configure HFM to read each client. Help please.
|
bowlinra
SSC Member
- Total Posts : 883
- Reward points : 0
- Joined: 12/6/2011
- Location: Virginia, USA
- Status: offline
- Ribbons : 5
Re: GPU folding again
Thursday, October 17, 2013 5:17 AM
(permalink)
GPU Folding!! Really Horvat?
OK. OK.. Me too.. You are probably going to want to go with GTX 670,680 or the 770, 780.. the AMD 7970 & 7990, R8 280 all putting up good PPD/Watt ratios.
|
Zagen30
SSC Member
- Total Posts : 528
- Reward points : 0
- Joined: 11/27/2009
- Location: Laguna Niguel, CA
- Status: offline
- Ribbons : 3
Re: GPU folding again
Thursday, October 17, 2013 5:51 PM
(permalink)
Horvat
Got V7 up and running. Too tired to figure out how to configure HFM to read each client. Help please.
If monitoring the computer on which HFM is installed, you only need to enter 127.0.0.1 for Address, otherwise you'll have to look up the IP of the computer. By default v7 uses port 36330 and does not have a password. Client Name is whatever you want HFM to call it. The Test Connection button helps to check if you've entered everything correctly.
 Core i7 3770K @4.3 GHz, 8 GB DDR3 @2133 MHz, 2xGTX 970 SSC @1379 MHz, Windows 7 Pro 64-bit Affiliate code: K4BJ4FHUX5
|
clo007
CLASSIFIED Member
- Total Posts : 3193
- Reward points : 0
- Joined: 2/9/2006
- Status: offline
- Ribbons : 11
Re: GPU folding again
Thursday, October 17, 2013 6:06 PM
(permalink)
Do the V7 for sure. The 400series card I honestly would not fold on. points per wattage is not good. The 600 will be good and score core17. Try to upgrade to 700 series when you can. That is the sweet spot.
|
Horvat
CLASSIFIED Member
- Total Posts : 3067
- Reward points : 0
- Joined: 6/16/2009
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re: GPU folding again
Thursday, October 17, 2013 10:43 PM
(permalink)
bowlinra
GPU Folding!! Really Horvat?
OK. OK.. Me too.. You are probably going to want to go with GTX 670,680 or the 770, 780.. the AMD 7970 & 7990, R8 280 all putting up good PPD/Watt ratios.
Oh yea. When I first started I had mass 9800 GX2's, GTX 280's and GTX 295's. Heck I even had one rig with 6 x 9800 GT's in it.
|
Horvat
CLASSIFIED Member
- Total Posts : 3067
- Reward points : 0
- Joined: 6/16/2009
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re: GPU folding again
Thursday, October 17, 2013 10:44 PM
(permalink)
Zagen30
Horvat
Got V7 up and running. Too tired to figure out how to configure HFM to read each client. Help please.
If monitoring the computer on which HFM is installed, you only need to enter 127.0.0.1 for Address, otherwise you'll have to look up the IP of the computer. By default v7 uses port 36330 and does not have a password. Client Name is whatever you want HFM to call it. The Test Connection button helps to check if you've entered everything correctly.
I'm monitoring another computer and have multiple clients on it. Not sure what you are trying to tell me.
|
Zagen30
SSC Member
- Total Posts : 528
- Reward points : 0
- Joined: 11/27/2009
- Location: Laguna Niguel, CA
- Status: offline
- Ribbons : 3
Re: GPU folding again
Thursday, October 17, 2013 11:09 PM
(permalink)
I was saying what information you need when adding a v7 client to HFM.
Core i7 3770K @4.3 GHz, 8 GB DDR3 @2133 MHz, 2xGTX 970 SSC @1379 MHz, Windows 7 Pro 64-bit Affiliate code: K4BJ4FHUX5
|
Horvat
CLASSIFIED Member
- Total Posts : 3067
- Reward points : 0
- Joined: 6/16/2009
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re: GPU folding again
Thursday, October 17, 2013 11:11 PM
(permalink)
OK. Tried that and it didn't work. I need you to get out the construction paper and crayons and draw me a picture.
|
Zagen30
SSC Member
- Total Posts : 528
- Reward points : 0
- Joined: 11/27/2009
- Location: Laguna Niguel, CA
- Status: offline
- Ribbons : 3
Re: GPU folding again
Friday, October 18, 2013 6:27 AM
(permalink)
You might want to enter a password into the client first, then restart it so the password takes effect. Make sure to enter it in the Connection tab as well as the Remote Access tab (both are in Configure of Advanced Control). Looking at the client's instructions, not having a password means that anything trying to connect to it must have its IP address Allowed in the Passwordless IP Address Restriction section, and that might apply to HFM as well as other clients.
Core i7 3770K @4.3 GHz, 8 GB DDR3 @2133 MHz, 2xGTX 970 SSC @1379 MHz, Windows 7 Pro 64-bit Affiliate code: K4BJ4FHUX5
|
Horvat
CLASSIFIED Member
- Total Posts : 3067
- Reward points : 0
- Joined: 6/16/2009
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re: GPU folding again
Friday, October 18, 2013 12:03 AM
(permalink)
|
TheWolf
CLASSIFIED Member
- Total Posts : 3800
- Reward points : 0
- Joined: 11/14/2007
- Location: Moss Point, Ms
- Status: offline
- Ribbons : 9
Re: GPU folding again
Friday, October 18, 2013 4:57 PM
(permalink)
See picture below, this is what it will look like when adding a Local client.  This is what it would look like when adding a V7 across the network that's in a W7 or Linux environment. You have to add the IP address of each rig you wish to monitor and give that rig a name.  Edit: this post will be helpful on the V7 end of the setup: http://forums.evga.com/FindPost/2041644
post edited by TheWolf - Friday, October 18, 2013 5:59 PM
Attached Image(s) 
|
Horvat
CLASSIFIED Member
- Total Posts : 3067
- Reward points : 0
- Joined: 6/16/2009
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re: GPU folding again
Saturday, October 19, 2013 3:39 AM
(permalink)
Duh, I'm a moron. I was still trying to use the V6 slots.
|
TheWolf
CLASSIFIED Member
- Total Posts : 3800
- Reward points : 0
- Joined: 11/14/2007
- Location: Moss Point, Ms
- Status: offline
- Ribbons : 9
Re: GPU folding again
Saturday, October 19, 2013 5:29 AM
(permalink)
Don't feel bad about that, think I did the same tryed to edit a old entry with v7 info with my 1st go of v7 & HFM. Is nice that once added correctly it picks up all V7 clients from a rig, not having to add a path for each is nice. Only thing I dislike is each can't have it own name like v6, takes a little getting use to looking at slot # and hardware to know just what hardware project/TPF/points your looking at when you have smp + 2x GPU's or more on a single rig.  
post edited by TheWolf - Saturday, October 19, 2013 5:48 AM
Attached Image(s)
|
notfordman
Omnipotent Enthusiast
- Total Posts : 8772
- Reward points : 0
- Joined: 8/10/2007
- Location: In a van, down by the
- Status: offline
- Ribbons : 28
Re: GPU folding again
Saturday, October 19, 2013 8:06 PM
(permalink)
Thank you Wolf & Zagen, works great!! Horvat did you get it going?? 
|
Horvat
CLASSIFIED Member
- Total Posts : 3067
- Reward points : 0
- Joined: 6/16/2009
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re: GPU folding again
Sunday, October 20, 2013 5:42 AM
(permalink)
notfordman
Thank you Wolf & Zagen, works great!! Horvat did you get it going??
Yes, except all my slot types say uniprocessor.
|
killerkanadian
iCX Member
- Total Posts : 255
- Reward points : 0
- Joined: 10/12/2013
- Status: offline
- Ribbons : 0
Re: GPU folding again
Sunday, October 20, 2013 6:17 AM
(permalink)
If you or anyone else isn't very electric conscience, I have a Galaxy GTS 450 I would let someone fold with. Right now i just use it to power my monitor while my 760 folds, because I don't play any fancy games at the moment.
|
Zagen30
SSC Member
- Total Posts : 528
- Reward points : 0
- Joined: 11/27/2009
- Location: Laguna Niguel, CA
- Status: offline
- Ribbons : 3
Re: GPU folding again
Sunday, October 20, 2013 9:59 AM
(permalink)
Horvat
Yes, except all my slot types say uniprocessor.
That's normal. Something about the way 7.3.6 labels slots causes HFM, which hasn't been updated in a while, to see them all as uniprocessor slots. Or maybe it gets confused and uniprocessor was the default case. Anyway, it's a cosmetic issue.
Core i7 3770K @4.3 GHz, 8 GB DDR3 @2133 MHz, 2xGTX 970 SSC @1379 MHz, Windows 7 Pro 64-bit Affiliate code: K4BJ4FHUX5
|
TheWolf
CLASSIFIED Member
- Total Posts : 3800
- Reward points : 0
- Joined: 11/14/2007
- Location: Moss Point, Ms
- Status: offline
- Ribbons : 9
Re: GPU folding again
Sunday, October 20, 2013 4:09 PM
(permalink)
Horvat
notfordman
Thank you Wolf & Zagen, works great!! Horvat did you get it going??
Yes, except all my slot types say uniprocessor.
Try this make sure in HFM under Edit/preferences/ web settings tab you have http://fah-web.stanford.edu/psummaryC.html as the project URL. Then HFM under Tools, click\ Download projects from Stanford After it completes a few WU's the slot type will most likely show up correct, or mine does. If your talking about SMP/GPU types? Edit: I'm using HFM version:0.9.1 rev. 595 06 July 2013
post edited by TheWolf - Sunday, October 20, 2013 4:20 PM
|
Horvat
CLASSIFIED Member
- Total Posts : 3067
- Reward points : 0
- Joined: 6/16/2009
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re: GPU folding again
Sunday, October 20, 2013 4:34 PM
(permalink)
TheWolf
Horvat
notfordman
Thank you Wolf & Zagen, works great!! Horvat did you get it going??
Yes, except all my slot types say uniprocessor.
Try this make sure in HFM under Edit/preferences/ web settings tab you have
http://fah-web.stanford.edu/psummaryC.html as the project URL.
Then HFM under Tools, click\ Download projects from Stanford
After it completes a few WU's the slot type will most likely show up correct, or mine does.
If your talking about SMP/GPU types?
Edit: I'm using HFM version:0.9.1 rev. 595 06 July 2013
Thanks Wolf. Already have those mods in place. Just did the download projects yesterday. Will wait and see.
|
TheCrazyCanuck
FTW Member
- Total Posts : 1126
- Reward points : 0
- Joined: 4/16/2006
- Location: Texas Yee-Haw!
- Status: offline
- Ribbons : 4
Re: GPU folding again
Monday, October 21, 2013 10:39 AM
(permalink)
I was in the same boat as Horvat, I came back without folding much with the v7 client and had no clue what to do. I think it would be a good idea if someone created a how to guide for 6xx/7xx/Titan and the v7 client in general since I had to piece together the information from all over the place. I was folding without the advanced WUs on my pair of Titans and was about to give up since I knew a Titan should achieve way more points than I was seeing so hopefully the breadcrumb trail I followed will earn me much more points.
|
killerkanadian
iCX Member
- Total Posts : 255
- Reward points : 0
- Joined: 10/12/2013
- Status: offline
- Ribbons : 0
Re: GPU folding again
Tuesday, October 22, 2013 1:55 AM
(permalink)
Horvat
Couldn't find anything in the help guides on configuring a current gpu folding setup. Would someone please point me there? Thanks. FYI currently running mixed cards; 400 and 600 series and looking to purchase 700 series.
What 700 series card are you thinking about?
|
Horvat
CLASSIFIED Member
- Total Posts : 3067
- Reward points : 0
- Joined: 6/16/2009
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re: GPU folding again
Tuesday, October 22, 2013 2:54 AM
(permalink)
killerkanadian
Horvat
Couldn't find anything in the help guides on configuring a current gpu folding setup. Would someone please point me there? Thanks. FYI currently running mixed cards; 400 and 600 series and looking to purchase 700 series.
What 700 series card are you thinking about?
One I can afford.
|
killerkanadian
iCX Member
- Total Posts : 255
- Reward points : 0
- Joined: 10/12/2013
- Status: offline
- Ribbons : 0
Re: GPU folding again
Tuesday, October 22, 2013 2:58 AM
(permalink)
Lol I know what you mean. I should have my replacement for m evga gtx 760 by the end of the week, if you'd be interested.
BTW tracking says Thursday for the gts.
|
Horvat
CLASSIFIED Member
- Total Posts : 3067
- Reward points : 0
- Joined: 6/16/2009
- Location: Cincinnati, OH
- Status: offline
- Ribbons : 9
Re: GPU folding again
Wednesday, October 23, 2013 2:01 AM
(permalink)
One more question on this topic. What flags should I run on the V7 client slots? Already have advanced programmed in.
|
cokeman54
SSC Member
- Total Posts : 962
- Reward points : 0
- Joined: 4/2/2002
- Location: Abilene, Texas
- Status: offline
- Ribbons : 3
Re: GPU folding again
Wednesday, October 23, 2013 2:28 AM
(permalink)
If you like 8018 leave it on advanced. If you want QRB then change it to beta.
|