EVGA

780 GTX Classified SLI - Lines across screen randomly when SLI enabled/disabled (vidlink)

Author
taiken
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 5/18/2008
  • Status: offline
  • Ribbons : 0
Monday, October 28, 2013 5:14 AM (permalink)
VIDEO IS HERE: youtu.be/yBfQKwNqEyU For some odd reason, my link didn't go through ...

I recently got two 780 GTX Classifieds (Got them fresh a week ago  ). After having to replace my first PSU, performance was PHENOMINAL except that sometimes I get lines going across one of my screens.

Since fresh installation to other various forms of trouble shooting, when ever SLI mode is enabled/disabled, one of the screens will display vertical dots/lines that travel across the screen towards the left horizontally. ( youtu.be/yBfQKwNqEyU)
 
The monitors are hooked up to the TOP (main) GPU while in SLI mode, the current display that is showing the lines is plugged into the HDMI port, but the DVI and DVI-D has also exhibited this issue... The monitor it happens on is not consistant!

A monitor is hooked up to the regular DVI with a DVI to VGA adaptor, as that monitors DVI port has EDID issues. I use the DVI-D, DVI and HDMI ports. I have tried three different SLI adaptors to no avail to see if that was causing this issue.

My screens also flicker once in a while, as if auto-adjusting, not sure if that matters either. I also have the fan noise issue with the resonating fins... Saw that thread on how to 'fix' it.

* I did have to replace my PSU initially, had a 1k watt PSU, but it was bronze rated and would not play nice when the CPU was overclocked, everything at stock had no issues however, recently upgraded to a 1.3k watt PSU (listed below in specs)
Gaming temps never go beyond 70c. The top card scores a 70 FPS average at 1080p with 8x AA, bottom card gets the same score. Heaven and Valley work well, as well as Crysis 2, FFXIV and GTA IV with graphics mods.
Clean driver installation, driver wiper, CCleaner, un-installation of EVGA precision and afterburner (I only use one or the other), the works and no issue. Issue is apparent even when the CPU is running stock. These cards have not been overclocked.
 
 
System Specs:
Operating System 
Windows 7 Ultimate 64-bit SP1
CPU 
Intel Core i7 3930K @ 3.20GHz 42 °C (Running at 4.5 Ghz)
RAM 
32.0GB DDR3 @ 800MHz (9-9-9-24)
Motherboard 
ASUSTeK COMPUTER INC. RAMPAGE IV EXTREME (LGA2011) 31 °C
Graphics
DELL3007WFPHC (2560x1600@60Hz)
SyncMaster (1200x1600@60Hz)
VP2030 SERIES (1200x1600@60Hz)

3072MB NVIDIA GeForce GTX 780 (EVGA) 31 °C
3072MB NVIDIA GeForce GTX 780 (EVGA) 25 °C
ForceWare version: 327.23
SLI Enabled
Hard Drives
112GB Corsair Force 3 SSD SCSI Disk Device (SSD) 30 °C
1863GB Hitachi HDS722020ALA330 SCSI Disk Device (SATA) 35 °C
466GB Western Digital WDC WD5000AAKS-00YGA SCSI Disk Device (SATA) 36 °C
466GB Western Digital WDC WD5000AAKS-00TMA SCSI Disk Device (SATA) 32 °C
1863GB Seagate ST2000DM001-9YN164 ATA Device (SATA) 29 °C
1863GB Seagate ST2000DM001-9YN164 ATA Device (SATA) 31 °C
Optical Drives
ASUS BW-12B1ST a SCSI CdRom Device
ATAPI iHES208 2 SCSI CdRom Device
Audio
SB Recon3D PCIe
PSU: 
EVGA SuperNOVA 1300 watt 
Case:
HAF X - All fans installed

post edited by taiken - Monday, October 28, 2013 6:27 AM
#1

2 Replies Related Threads

    maniacvvv
    Omnipotent Enthusiast
    • Total Posts : 9897
    • Reward points : 0
    • Joined: 9/11/2009
    • Location: Miami Beach FL
    • Status: offline
    • Ribbons : 165
    Re: 780 GTX Classified SLI - Lines across screen randomly when SLI enabled/disabled (vidli Monday, October 28, 2013 6:02 AM (permalink)
     
    Welcome to the EVGA forums 
     
    DELL3007WFPHC (2560x1600@60Hz)
    SyncMaster (1200x1600@60Hz)
    VP2030 SERIES (1200x1600@60Hz)
     
    "The monitors are hooked up to the TOP (main) GPU while in SLI mode, the current display that is showing the lines is plugged into the HDMI port, but the DVI and DVI-D has also exhibited this issue... The monitor it happens on is not consistant! 
    A monitor is hooked up to the regular DVI with a DVI to VGA adaptor, as that monitors DVI port has EDID issues. I use the DVI-D, DVI and HDMI ports. I have tried three different SLI adaptors to no avail to see if that was causing this issue."

     
    ---------------------------------------------------------------------------
     
    A DELL
    A Samsung
    and a Viewsonic...  ALL with different response times and differing horizontal refreshrates
     
    -------------------------------------------------------------------------------
     
    Think about it.... what are you asking of the driver/cards when you enable disable SLI?
     
     
    You might also want to try out Nvidia 331.58
      
     
     
    post edited by maniacvvv - Monday, October 28, 2013 6:11 AM




    #2
    taiken
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 5/18/2008
    • Status: offline
    • Ribbons : 0
    Re: 780 GTX Classified SLI - Lines across screen randomly when SLI enabled/disabled (vidli Monday, October 28, 2013 6:26 AM (permalink)
    I initially was using the 331.58 drivers, downgraded to 327.23 to see if it'll help. Just updated a few minutes ago to the latest 

    Do screens with different horizontal refresh rates really make that much of an impact to create the effect in the video o.O? The intermittent 'flicker' makes sense after reading what you said about timings but the lines/dots on a random screen is still a mystery :x
     
    Also, thanks for the welcome! Been a long time lurker lol
    #3
    Jump to: