I have had several BSOD's with Corsair's Force 3 coming out of sleep mode.  
 
Also when the computer restarts I will get an error that I don't have the proper windows files installed and I need to put in the windows CD and do a repair.  However when I simply go into the BIOS and remove all the drives but my Force 3 drive from the boot order it works fine.  I don't have windows installed on any other drive, only the Force 3 drive.  The boot order also changes sometimes, almost like the MB thought the Force 3 was removed from the computer and then assigns another HD to be brought back into the boot order (usually my raptor which is in a red SATA 6.0 slot).  If it happens again I will write down the codes it throws (if I can catch it), as well as the boot issue codes.  
 
Anyone else with issues? 

http://forum.corsair.com/v3/showthread.php?t=95688

Turns out my firmware needs an update, hopefully that fixes everything.  Corsair said the current drives that shipped out are not shipping with the same issues, but some may still need a firmware update.  I checked my numbers and its not one in the RMA batch, so I am updating the firmware as we speak.  /crosses fingers

Failed to upgrade the firmware... /fail going to try some stuff when I have more time... 

Don't forget to see the Corsair forums if the upgrade fails again.  Yellow_beard my have more info. 

I have a Force 3 and I had to replace it.  RMA goes pretty quickly and I live in Europe. Look at the serial number it tells you if it is the version with the flaw.

I don't know yet, still waiting for the FTW

I have two Force 3 120gb SSD's in Raid 0 and I have all these issues, nothing they suggest help except moving them into the Sata 2 slots.  I can't even boot my PC if i use the Sata 3 slots.
 
At first 1 of my disks said (Error Occured) and it still booted.  I had another of the so called Freeze/BSOD and now my second disk says (Error Occured) , right now all I do is wait for answer to the problem.  I figure it's just a matter of time before I have to secure erase and reload my box.  I get occasional Freeze/BSOD still.
 
Wish I would've picked different disks.

Isnt Forge GT using the same Sandforce (2281) Controller?
 
To me the best solutions seems to be getting a 240GB drive instead, since all the issues reported only affect 120 GB drives ..

I just go my force 3 120g and i have to tell the bios to boot from that drive instead of the other drives every time i shut down or restart.  I have the P67 FTW.

Thanks i will try that later tonight.  If i disconect the external hdd then it will boot windows.  Sometime between 4:30 AM and 3:30 PM the computer shut off.  My OC was stable on my vertex 2.  Maybe the PCH increase will help that.