EVGA

Enable RE-BAR support on 3dmark

Author
Post
Essentials Only Full Version
Gawl86
New Member
  • Total Posts : 41
  • Reward points : 0
  • Joined: 2016/01/26 14:32:36
  • Status: offline
  • Ribbons : 0
2021/08/16 01:15:39 (permalink)
Hi all,
I am recently a happy owner of a rtx3090 Kingpin Edition. I enabled the RE-BAR function on the card and bios but I was reading around that to enable it completely on games and benchmarks it was necessary to use Nvidia Inspector. I have read some threads around where they were going to modify 3 voices, I tried but in the benchmarks I didn't notice any difference. Maybe you need to change other entries in the profile? Could someone give me a link to a well done guide where it explains in detail what to change? Because some say that you can even boost over 200 points with the same settings on Port Royal.
Currently I have arrived here without the aid of these phantom modified keys.
 
https://www.3dmark.com/3d...80wjguRBFX4OHIe0jHMY08
 
Thank you in advance for your help
#1

28 Replies Related Threads
    elbramso
    Superclocked Member
    • Total Posts : 192
    • Reward points : 0
    • Joined: 2021/01/31 22:31:39
    • Status: offline
    • Ribbons : 1
    Re: Enable RE-BAR support on 3dmark 2021/08/16 04:44:24 (permalink)
    Can't help here, but...
    Now that I see your thread I'm wondering if I should disable re-bar to see if it makes any difference in PR. 
    I have an older gen CPU which might not be strong enough to catch up^^
     
    btw. nice score and clocks! What offsets do you use? 1000w bios? Classified tool? Settings?
     
     
     

    RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
    #2
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 84889
    • Reward points : 0
    • Joined: 2004/10/05 12:44:35
    • Location: Netherlands
    • Status: offline
    • Ribbons : 86
    Re: Enable RE-BAR support on 3dmark 2021/08/16 04:53:18 (permalink)
    That is an utterly fantastic Port Royal benchmark score by the way. 

    AMD Ryzen 9 7950X,  Corsair Mp700 Pro M.2, 64GB Corsair Dominator Titanium DDR5  X670E Steel Legend, MSI RTX 4090 Associate Code: H5U80QBH6BH0AXF. I am NOT an employee of EVGA

    #3
    Gawl86
    New Member
    • Total Posts : 41
    • Reward points : 0
    • Joined: 2016/01/26 14:32:36
    • Status: offline
    • Ribbons : 0
    Re: Enable RE-BAR support on 3dmark 2021/08/16 04:59:16 (permalink)
    elbramso
    Can't help here, but...
    Now that I see your thread I'm wondering if I should disable re-bar to see if it makes any difference in PR. 
    I have an older gen CPU which might not be strong enough to catch up^^
     
    btw. nice score and clocks! What offsets do you use? 1000w bios? Classified tool? Settings?
     
     
     
    thanks, using aio stock cooler. Next WE can find to mounting HC. Using 1000w bios and evbot. Set core 1.223v, mem 1.4v and pex 1.093v bot loadline level 0 and disabled all OCP.
    #4
    Gawl86
    New Member
    • Total Posts : 41
    • Reward points : 0
    • Joined: 2016/01/26 14:32:36
    • Status: offline
    • Ribbons : 0
    Re: Enable RE-BAR support on 3dmark 2021/08/16 05:01:39 (permalink)
    rjohnson11
    That is an utterly fantastic Port Royal benchmark score by the way. 
    really thanks, i hope can push futher
    #5
    elbramso
    Superclocked Member
    • Total Posts : 192
    • Reward points : 0
    • Joined: 2021/01/31 22:31:39
    • Status: offline
    • Ribbons : 1
    Re: Enable RE-BAR support on 3dmark 2021/08/16 05:23:59 (permalink)
    Gawl86
    elbramso
    Can't help here, but...
    Now that I see your thread I'm wondering if I should disable re-bar to see if it makes any difference in PR. 
    I have an older gen CPU which might not be strong enough to catch up^^
     
    btw. nice score and clocks! What offsets do you use? 1000w bios? Classified tool? Settings?
     
     
     
    thanks, using aio stock cooler. Next WE can find to mounting HC. Using 1000w bios and evbot. Set core 1.223v, mem 1.4v and pex 1.093v bot loadline level 0 and disabled all OCP.



    what does the ocp do actually? it is an overclocking protection but from what :D ?
    btw. 1.223v and loadline 0 is close to the edge of what the aio can handle, or not?
     

    RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
    #6
    transdogmifier
    CLASSIFIED ULTRA Member
    • Total Posts : 5899
    • Reward points : 0
    • Joined: 2003/09/05 14:26:21
    • Location: Orlando, Fl
    • Status: offline
    • Ribbons : 18
    Re: Enable RE-BAR support on 3dmark 2021/08/16 05:44:59 (permalink)
    https://www.tomshardware.com/reviews/ocp-overcurrent-protection-power-supply-definition-psu,6241.html
     

    AMD Ryzen 7900x3d
    Deepcool LT720
    Gigabyte Aorus Elite AX X670 (Might change..don't like this board)
    eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it)
    Asus ROG Swift PG43UQ 4k Monitor
    eVGA 1600W Supernova T2 PSU
    32GB Kingston 6000 DDR5 (2x16GB) Fury
    Corsair MP600 Pro 2TB (Boot)
    Corsair MP600 2TB (Games/Data)
    Phanteks P500A Case
     
    #7
    Gawl86
    New Member
    • Total Posts : 41
    • Reward points : 0
    • Joined: 2016/01/26 14:32:36
    • Status: offline
    • Ribbons : 0
    Re: Enable RE-BAR support on 3dmark 2021/08/16 06:50:37 (permalink)
    elbramso
    Gawl86
    elbramso
    Can't help here, but...
    Now that I see your thread I'm wondering if I should disable re-bar to see if it makes any difference in PR. 
    I have an older gen CPU which might not be strong enough to catch up^^

    btw. nice score and clocks! What offsets do you use? 1000w bios? Classified tool? Settings?



    thanks, using aio stock cooler. Next WE can find to mounting HC. Using 1000w bios and evbot. Set core 1.223v, mem 1.4v and pex 1.093v bot loadline level 0 and disabled all OCP.



    what does the ocp do actually? it is an overclocking protection but from what :D ?
    btw. 1.223v and loadline 0 is close to the edge of what the aio can handle, or not?
     
    depends on temps
    #8
    elbramso
    Superclocked Member
    • Total Posts : 192
    • Reward points : 0
    • Joined: 2021/01/31 22:31:39
    • Status: offline
    • Ribbons : 1
    Re: Enable RE-BAR support on 3dmark 2021/08/16 06:58:46 (permalink)
    Gawl86
    elbramso
    Gawl86
    elbramso
    Can't help here, but...
    Now that I see your thread I'm wondering if I should disable re-bar to see if it makes any difference in PR. 
    I have an older gen CPU which might not be strong enough to catch up^^

    btw. nice score and clocks! What offsets do you use? 1000w bios? Classified tool? Settings?



    thanks, using aio stock cooler. Next WE can find to mounting HC. Using 1000w bios and evbot. Set core 1.223v, mem 1.4v and pex 1.093v bot loadline level 0 and disabled all OCP.



    what does the ocp do actually? it is an overclocking protection but from what :D ?
    btw. 1.223v and loadline 0 is close to the edge of what the aio can handle, or not?
     
    depends on temps

    ok but how much das loadline 0 actually overshoot ur current setting of 1.223v? Are you close to 1.25v?
     
     

    RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
    #9
    Gawl86
    New Member
    • Total Posts : 41
    • Reward points : 0
    • Joined: 2016/01/26 14:32:36
    • Status: offline
    • Ribbons : 0
    Re: Enable RE-BAR support on 3dmark 2021/08/16 07:13:16 (permalink)
    elbramso
    Gawl86
    elbramso
    Gawl86
    elbramso
    Can't help here, but...
    Now that I see your thread I'm wondering if I should disable re-bar to see if it makes any difference in PR. 
    I have an older gen CPU which might not be strong enough to catch up^^

    btw. nice score and clocks! What offsets do you use? 1000w bios? Classified tool? Settings?



    thanks, using aio stock cooler. Next WE can find to mounting HC. Using 1000w bios and evbot. Set core 1.223v, mem 1.4v and pex 1.093v bot loadline level 0 and disabled all OCP.



    what does the ocp do actually? it is an overclocking protection but from what :D ?
    btw. 1.223v and loadline 0 is close to the edge of what the aio can handle, or not?

    depends on temps

    ok but how much das loadline 0 actually overshoot ur current setting of 1.223v? Are you close to 1.25v?
     
     
    nope, set 1.223 and close to 1.227v
    #10
    elbramso
    Superclocked Member
    • Total Posts : 192
    • Reward points : 0
    • Joined: 2021/01/31 22:31:39
    • Status: offline
    • Ribbons : 1
    Re: Enable RE-BAR support on 3dmark 2021/08/16 07:29:23 (permalink)
    Gawl86

    nope, set 1.223 and close to 1.227v

    fixed offset or custom curve? MSI AB or PX1?
    I wish my card could clock that high
    post edited by elbramso - 2021/08/16 07:31:44

    RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
    #11
    kraade
    CLASSIFIED Member
    • Total Posts : 2405
    • Reward points : 0
    • Joined: 2020/10/18 09:05:52
    • Location: Georgia
    • Status: online
    • Ribbons : 7
    Re: Enable RE-BAR support on 3dmark 2021/08/16 08:01:45 (permalink)
    The P1X rebar tab tells you if all the boxes are checked, The KPE I got in June had rabar in all 3 bios and the 1k vbios from Vince also is enabled. Congratulations on #65 HOF obtw....
    post edited by kraade - 2021/08/16 08:05:33

    https://modsrigs.evga.com/detail.aspx?BuildID=44032
    BECAUSE MOD RIGS Y NOT
     
    #12
    Gawl86
    New Member
    • Total Posts : 41
    • Reward points : 0
    • Joined: 2016/01/26 14:32:36
    • Status: offline
    • Ribbons : 0
    Re: Enable RE-BAR support on 3dmark 2021/08/16 10:29:20 (permalink)
    elbramso
    Gawl86

    nope, set 1.223 and close to 1.227v

    fixed offset or custom curve? MSI AB or PX1?
    I wish my card could clock that high
    fixed offset to 100%
    #13
    Gawl86
    New Member
    • Total Posts : 41
    • Reward points : 0
    • Joined: 2016/01/26 14:32:36
    • Status: offline
    • Ribbons : 0
    Re: Enable RE-BAR support on 3dmark 2021/08/16 10:38:29 (permalink)
    kraade
    The P1X rebar tab tells you if all the boxes are checked, The KPE I got in June had rabar in all 3 bios and the 1k vbios from Vince also is enabled. Congratulations on #65 HOF obtw....
    thanks. Yes all tab tells rebar was enabled but in any thread read it's possible to increase score only change any keys on inspector profile
    #14
    elbramso
    Superclocked Member
    • Total Posts : 192
    • Reward points : 0
    • Joined: 2021/01/31 22:31:39
    • Status: offline
    • Ribbons : 1
    Re: Enable RE-BAR support on 3dmark 2021/08/16 22:55:08 (permalink)
    Gawl86
    kraade
    The P1X rebar tab tells you if all the boxes are checked, The KPE I got in June had rabar in all 3 bios and the 1k vbios from Vince also is enabled. Congratulations on #65 HOF obtw....
    thanks. Yes all tab tells rebar was enabled but in any thread read it's possible to increase score only change any keys on inspector profile



    You could try to disable re-bar in your bios and see if it changes your score.
    When I use a newer driver my pr score goes down when I have re-bar enabled. My guess is, that my older gen cpu can't catch up.
     
    BTW. I tried Loadline 0 yesterday with 1.213v in classified tool and that overshoots my nvvdd too much. I saw NVVDD TOO HIGH! message on the oled
    post edited by elbramso - 2021/08/17 01:11:44

    RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
    #15
    Gawl86
    New Member
    • Total Posts : 41
    • Reward points : 0
    • Joined: 2016/01/26 14:32:36
    • Status: offline
    • Ribbons : 0
    Re: Enable RE-BAR support on 3dmark 2021/08/18 07:48:48 (permalink)
    elbramso
    Gawl86
    kraade
    The P1X rebar tab tells you if all the boxes are checked, The KPE I got in June had rabar in all 3 bios and the 1k vbios from Vince also is enabled. Congratulations on #65 HOF obtw....
    thanks. Yes all tab tells rebar was enabled but in any thread read it's possible to increase score only change any keys on inspector profile



    You could try to disable re-bar in your bios and see if it changes your score.
    When I use a newer driver my pr score goes down when I have re-bar enabled. My guess is, that my older gen cpu can't catch up.
     
    BTW. I tried Loadline 0 yesterday with 1.213v in classified tool and that overshoots my nvvdd too much. I saw NVVDD TOO HIGH! message on the oled


    I tried the classified tool and I noticed that the set value is discordant with the actual value. to have effective 1.227v, on the tool it is necessary to set 1.175v. As I have already said, I don't use the tool but the evbot and there the reading and the setting are correct
    #16
    talon951
    FTW Member
    • Total Posts : 1026
    • Reward points : 0
    • Joined: 2020/10/06 02:41:19
    • Status: offline
    • Ribbons : 3
    Re: Enable RE-BAR support on 3dmark 2021/08/18 10:56:32 (permalink)
    I gained a couple hundred points in PR by forcing reBar on my both my 3080ti and 3090. One of them I had to enable reBar globally in nvprofileinapector to get it to work though.
    #17
    kevinc313
    CLASSIFIED ULTRA Member
    • Total Posts : 5004
    • Reward points : 0
    • Joined: 2019/02/28 09:27:55
    • Status: offline
    • Ribbons : 22
    Re: Enable RE-BAR support on 3dmark 2021/08/18 11:21:10 (permalink)
    IIRC when Rebar first came out I tested back to back and picked up about 300 in PR and none in TS.  3080 FTW3.
    #18
    Gawl86
    New Member
    • Total Posts : 41
    • Reward points : 0
    • Joined: 2016/01/26 14:32:36
    • Status: offline
    • Ribbons : 0
    Re: Enable RE-BAR support on 3dmark 2021/08/18 11:28:20 (permalink)
    talon951
    I gained a couple hundred points in PR by forcing reBar on my both my 3080ti and 3090. One of them I had to enable reBar globally in nvprofileinapector to get it to work though.
    You can share which keys have you changed on inspector?
    #19
    talon951
    FTW Member
    • Total Posts : 1026
    • Reward points : 0
    • Joined: 2020/10/06 02:41:19
    • Status: offline
    • Ribbons : 3
    Re: Enable RE-BAR support on 3dmark 2021/08/18 12:11:44 (permalink)
    You have to click the button that displays unknown items first, then set the 3 shown in this pic.

    https://cdn.wccftech.com/...A_Inspector-scaled.jpg

    To enable global just leave the pull down at the top as default.

    That pic comes from here,

    https://wccftech.com/here...-via-nvidia-inspector/
    #20
    Gawl86
    New Member
    • Total Posts : 41
    • Reward points : 0
    • Joined: 2016/01/26 14:32:36
    • Status: offline
    • Ribbons : 0
    Re: Enable RE-BAR support on 3dmark 2021/08/18 12:22:40 (permalink)
    talon951
    You have to click the button that displays unknown items first, then set the 3 shown in this pic.

    https://cdn.wccftech.com/...A_Inspector-scaled.jpg

    To enable global just leave the pull down at the top as default.

    That pic comes from here,

    https://wccftech.com/here...-via-nvidia-inspector/
    I have already used this guide but unfortunately I have not found a score increase in any benchmark 😞
    #21
    elbramso
    Superclocked Member
    • Total Posts : 192
    • Reward points : 0
    • Joined: 2021/01/31 22:31:39
    • Status: offline
    • Ribbons : 1
    Re: Enable RE-BAR support on 3dmark 2021/08/20 14:03:33 (permalink)
    I actually went from 15747 to 16082 with ReBar enabled in Port Royal. Pretty crazy

    RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
    #22
    Gawl86
    New Member
    • Total Posts : 41
    • Reward points : 0
    • Joined: 2016/01/26 14:32:36
    • Status: offline
    • Ribbons : 0
    Re: Enable RE-BAR support on 3dmark 2021/08/20 14:13:51 (permalink)
    elbramso
    I actually went from 15747 to 16082 with ReBar enabled in Port Royal. Pretty crazy
    really strong score! You used inspector profile?
    #23
    elbramso
    Superclocked Member
    • Total Posts : 192
    • Reward points : 0
    • Joined: 2021/01/31 22:31:39
    • Status: offline
    • Ribbons : 1
    Re: Enable RE-BAR support on 3dmark 2021/08/20 14:20:20 (permalink)
    Gawl86
    elbramso
    I actually went from 15747 to 16082 with ReBar enabled in Port Royal. Pretty crazy
    really strong score! You used inspector profile?

    Yes, I updated to the latest driver and used the inspector to enable ReBar

    RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
    #24
    Gawl86
    New Member
    • Total Posts : 41
    • Reward points : 0
    • Joined: 2016/01/26 14:32:36
    • Status: offline
    • Ribbons : 0
    Re: Enable RE-BAR support on 3dmark 2021/08/20 14:28:20 (permalink)
    elbramso
    Gawl86
    elbramso
    I actually went from 15747 to 16082 with ReBar enabled in Port Royal. Pretty crazy
    really strong score! You used inspector profile?

    Yes, I updated to the latest driver and used the inspector to enable ReBar
    you changed only the three keys??
    #25
    elbramso
    Superclocked Member
    • Total Posts : 192
    • Reward points : 0
    • Joined: 2021/01/31 22:31:39
    • Status: offline
    • Ribbons : 1
    Re: Enable RE-BAR support on 3dmark 2021/08/21 01:21:27 (permalink)
    Gawl86
    elbramso
    Gawl86
    elbramso
    I actually went from 15747 to 16082 with ReBar enabled in Port Royal. Pretty crazy
    really strong score! You used inspector profile?

    Yes, I updated to the latest driver and used the inspector to enable ReBar
    you changed only the three keys??

    Yes but that there is a profile for this already. Something like "3DMark Port Royal DLSS"

    RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
    #26
    Gawl86
    New Member
    • Total Posts : 41
    • Reward points : 0
    • Joined: 2016/01/26 14:32:36
    • Status: offline
    • Ribbons : 0
    Re: Enable RE-BAR support on 3dmark 2021/08/21 08:46:34 (permalink)
    elbramso
    Gawl86
    elbramso
    Gawl86
    elbramso
    I actually went from 15747 to 16082 with ReBar enabled in Port Royal. Pretty crazy
    really strong score! You used inspector profile?

    Yes, I updated to the latest driver and used the inspector to enable ReBar
    you changed only the three keys??

    Yes but that there is a profile for this already. Something like "3DMark Port Royal DLSS"
    Great!! I found profile and used it. https://www.3dmark.com/pr/1182886
    Thanks 😁
    #27
    elbramso
    Superclocked Member
    • Total Posts : 192
    • Reward points : 0
    • Joined: 2021/01/31 22:31:39
    • Status: offline
    • Ribbons : 1
    Re: Enable RE-BAR support on 3dmark 2021/08/21 10:09:38 (permalink)
    Gawl86
    elbramso
    Gawl86
    elbramso
    Gawl86
    elbramso
    I actually went from 15747 to 16082 with ReBar enabled in Port Royal. Pretty crazy
    really strong score! You used inspector profile?

    Yes, I updated to the latest driver and used the inspector to enable ReBar
    you changed only the three keys??

    Yes but that there is a profile for this already. Something like "3DMark Port Royal DLSS"
    Great!! I found profile and used it. https://www.3dmark.com/pr/1182886
    Thanks 😁

    You kicked me out of the top 50 😜

    RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
    #28
    Gawl86
    New Member
    • Total Posts : 41
    • Reward points : 0
    • Joined: 2016/01/26 14:32:36
    • Status: offline
    • Ribbons : 0
    Re: Enable RE-BAR support on 3dmark 2021/08/21 10:22:29 (permalink)
    elbramso
    Gawl86
    elbramso
    Gawl86
    elbramso
    Gawl86
    elbramso
    I actually went from 15747 to 16082 with ReBar enabled in Port Royal. Pretty crazy
    really strong score! You used inspector profile?

    Yes, I updated to the latest driver and used the inspector to enable ReBar
    you changed only the three keys??

    Yes but that there is a profile for this already. Something like "3DMark Port Royal DLSS"
    Great!! I found profile and used it. https://www.3dmark.com/pr/1182886
    Thanks 😁

    You kicked me out of the top 50 😜
    next run with HC 😎
    #29
    Jump to:
  • Back to Mobile