EVGA

EVGA Pro SLI Bridges!

Page: << < ..678910.. > >> Showing page 6 of 31
Author
Post
Essentials Only Full Version
EVGA_JacobF
EVGA Alumni
  • Total Posts : 16946
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 12:23:16 (permalink)
This is what it would look like
 



#151
BlueMoon3000
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2013/07/30 16:31:06
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 12:29:04 (permalink)
Thanks for taking the time to grab a picture. I think personally my OCD would probably not allow me to use the 2/3 way connector for 40mm spacing. But if you guys make a smaller version of the 2-way connector you will have at least 1 customer!
#152
gutcheck
CLASSIFIED Member
  • Total Posts : 3665
  • Reward points : 0
  • Joined: 2006/11/04 17:45:34
  • Status: offline
  • Ribbons : 9
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 12:41:46 (permalink)
Installed. Very nice!

3900X 4.5 GHZ on an Asus Hero
32 GB 3600 MHZ Corsair RGB Pro DDR4 RAM
1 EVGA 3090 XC3 soon to be Watercooled
2 2GB Corsair MP600's
HX1000 with custom sleaving
#153
S2000Gan
FTW Member
  • Total Posts : 1423
  • Reward points : 0
  • Joined: 2010/09/05 23:24:31
  • Location: Bellevue, WA
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 12:43:55 (permalink)
I thought the 2way looked longer than two side-by-side cards like described...

Nice to know there is a bridge for 1 slot or 2 slot spacing.
Too bad the 2 way isnt double width.
Also too bad that means there isnt a 2 way for side-by-side (although I guess you could use the 3 way)

:'( RIP EVGA GPUs :'( 2009(9500 GT) - 2019(RTX 2070)
My Rig: CPU i7-9700K   Motherboard Asus Maximus XI Code   RAM 32GB G.Skill Trident Z
Graphics Card EVGA GTX 2070   Power Supply Corsair RM850x 
Case Fractal Design Define R6   CPU Cooling XSPC Raystorm & 2x 240mm Radiators
#154
enigma442
FTW Member
  • Total Posts : 1539
  • Reward points : 0
  • Joined: 2010/05/03 17:48:39
  • Location: Lost in Eastern Kentucky
  • Status: offline
  • Ribbons : 3
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 13:01:05 (permalink)
CAxVIPER

enigma442

Urobulus

Okay I went through the whole thread and just want to double confirm something: my mobo is an Asus P8Z77-V Pro and I have a 780 in slot 1 and another 780 in slot 3.

Current spacing on my SLi connector between the middle of the 2 SLi black connectors is 60mm exactly: am I SOL and can't use any of those bridges? :(

You are in the same boat as a lot of us ASUS owners.
The bridges will not fit our 60mm spacing.
Hopefully EVGA will make some that will fit.

Why wont it fit the 60mm spacing? The EVGA 2 way bridge has a 60mm spacing while the 3 way bridge has 40mm spacings. 

  Because the specs i saw said the 2 way bridge was 40mm spacing.
Thanks Jacob for clearing this up.
That means we can use the 2 way bridge.

  My specs.
Case-Corsair 800D full tower~LG Bluray  Burner.
Processor-Intel I7-3770K @4.2GHZ~Lighton Bluray Burner.
Motherboard-ASUS P8z77-v Deluxe
Memory-G.SKILL Ripjaws x 32GB. DDR3 1600 Dual Channel.
GPU-EVGA GTX-TITAN SC x2 in SLI  Water cooled EK full XXL blocks.
Power Supply-Corsair AX1200 Gold.
1 OCZ VERTEX 4 512GB SSD Boot Drive.1 Crucial M4 128GB SSD cache for Hitachi 2TB storage drive.                             1 WD Caviar Black 1-TB. 7200RPM Hard Drive.
Intel RTS2011LC Liquid cooling Solution for cpu.
Sound Blaster Zx soundcard.
Win.7 64BIT Professional.(Now playing with Win 8.1 to see how i like it.)

 
#155
Zuhl3156
Omnipotent Enthusiast
  • Total Posts : 13061
  • Reward points : 0
  • Joined: 2010/03/23 12:52:50
  • Location: Kidnapped by Gypsies
  • Status: offline
  • Ribbons : 34
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 13:30:57 (permalink)
Is there any way for us poor people who can't afford Titan or 700 series boards to get the logo to light up? Such as running our own power connection to the bridge instead of through the video board?

 
 https://www.heatware.com/u/100032/to
#156
S2000Gan
FTW Member
  • Total Posts : 1423
  • Reward points : 0
  • Joined: 2010/09/05 23:24:31
  • Location: Bellevue, WA
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 13:49:00 (permalink)
So many people asking the same question.
YES you can likely power the bridge yourself.
But you need to know where the LED power trace is. 

:'( RIP EVGA GPUs :'( 2009(9500 GT) - 2019(RTX 2070)
My Rig: CPU i7-9700K   Motherboard Asus Maximus XI Code   RAM 32GB G.Skill Trident Z
Graphics Card EVGA GTX 2070   Power Supply Corsair RM850x 
Case Fractal Design Define R6   CPU Cooling XSPC Raystorm & 2x 240mm Radiators
#157
rasta_nz
New Member
  • Total Posts : 93
  • Reward points : 0
  • Joined: 2009/06/30 01:43:47
  • Location: New Zealand
  • Status: offline
  • Ribbons : 3
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 13:57:00 (permalink)
I'll wait til I actually see a bridge mounted in 2 way sli on an asus maximus v extreme before I make an order...
I haven't measured my space but it looks to be the wrong length for my board.

If anyone can confirm any one of the bridges will fit then I'll gladly buy two of them... they look primo and will compliment my 770's with backplates on my rig.
 
Oh btw... you don't happen to sell them rubber protector cap thingys with the evga logo on it for the cards unused sli connectors? I just cut one that came with my cards but it looks funny because it only has left over evga logo from both halves (the e and the a), it don't look right plus I'm fussy.

Motherboard ASUS Maximus V Extreme Z77 CPU Intel Core i7 3770K 3.5GHz LG 1155 RAM Corsair 4x Dominator GT CMT16GX3M4X2133C9 Graphics Card EVGA 2x GTX 770 SC ACX Case Cooler Master Cosmos II Monitor BenQ M2700HD CD/DVD LG BH14NS40 3D Blu-Ray ReWriter Cooling Corsair H100 Fan Cooler Master 1x Mega Flow 200 Blue LED Fan Corsair 1x Air Series AF140 Quiet Edition Fan Corsair 10x Air Series AF120 Quiet Edition Hard Drive Seagate Momentus XT 750GB Solid State Hybrid Hard Drive Seagate 2x 4TB Hard Drive Hitachi 4x 4TB Keyboard Logitech G510 Mouse Logitech G9x Laser Mouse PSU Corsair AX 1200 Fully Modular Accessory Xigmatek 3 in 3 SATA HDD Hot-Swap Cage
#158
Zuhl3156
Omnipotent Enthusiast
  • Total Posts : 13061
  • Reward points : 0
  • Joined: 2010/03/23 12:52:50
  • Location: Kidnapped by Gypsies
  • Status: offline
  • Ribbons : 34
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 14:01:39 (permalink)
S2000Gan

So many people asking the same question.
YES you can likely power the bridge yourself.
But you need to know where the LED power trace is. 

It shouldn't be too hard to find and since it only lights when using a Titan or 700 series board, the connections are probably dead at a 600 series board and applying voltage should cause no damage but I think I'll wait until someone else tries it in case I'm wrong.

 
 https://www.heatware.com/u/100032/to
#159
exilelrrp
iCX Member
  • Total Posts : 411
  • Reward points : 0
  • Joined: 2007/02/19 11:00:23
  • Location: BX INF
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 14:21:01 (permalink)
EVGA_JacobF

Trelor

Ugh why won't this work with my 6xx series...


It will work, but unfortunately the LED just will not light up :(
  Ok, but will EVGA have an update or newer product down the line to make'em light up?
I do hope they make'em universal for all cards, I know I'm asking to much being that EVGA always fails on us EVGA customers, when it comes to 6 months to a year old product EVGA never looks back, unfortunately we customers have to either buy another newer GPU in order for this SLI Pro Bridge to light up.
 
My EVGA Love & Hate Relationship.

*Lian Li PC-011D Mini (Black) *i9-10900K *ROG Strix Z490-G *Nzxt Kraken Z73/Lian Li UNI SL120 Series *Corsair Vengeance Pro RGB 64GB (4x16GB) DDR4 *Corsair HX1200i *EVGA GeForce RTX 3080 Ultra FTW3 *Samsung 970 Evo M.2 1TB *Samsung 960 Evo M.2 500GB *Samsung 840 Evo Series 1TB SSD *Asus ROG Swift PG43UQ *Corsair K70 MK.2 RGB *Corsair Dark Core *Corsair Gaming MM800 *Corsair ST100 *Razer Nari Ultimate.

 
 
#160
Islandborn
Superclocked Member
  • Total Posts : 131
  • Reward points : 0
  • Joined: 2013/02/26 15:44:14
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 14:23:37 (permalink)
Hello. Sorry if this question has been asked before but would like some clarification. I have 2 EVGA Super clocked ED. Titans on an MSI z77gd65 motherboard. The cards are with the stock fan/shroud. My question is that I probably would have to use the 2-3 way sli bridge due to the slot spacing, but I also have a Sound blaster  x-fi card buried between the 2 Titans using the PCI-e slot. Will I have an issue connecting the SLI bridge with the sound card being in the way? Thanks
#161
exilelrrp
iCX Member
  • Total Posts : 411
  • Reward points : 0
  • Joined: 2007/02/19 11:00:23
  • Location: BX INF
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 14:32:14 (permalink)

So I'm guessing my set up would be a 3 or 4 Sli Bridge Pro?

*Lian Li PC-011D Mini (Black) *i9-10900K *ROG Strix Z490-G *Nzxt Kraken Z73/Lian Li UNI SL120 Series *Corsair Vengeance Pro RGB 64GB (4x16GB) DDR4 *Corsair HX1200i *EVGA GeForce RTX 3080 Ultra FTW3 *Samsung 970 Evo M.2 1TB *Samsung 960 Evo M.2 500GB *Samsung 840 Evo Series 1TB SSD *Asus ROG Swift PG43UQ *Corsair K70 MK.2 RGB *Corsair Dark Core *Corsair Gaming MM800 *Corsair ST100 *Razer Nari Ultimate.

 
 
#162
exilelrrp
iCX Member
  • Total Posts : 411
  • Reward points : 0
  • Joined: 2007/02/19 11:00:23
  • Location: BX INF
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 14:39:25 (permalink)
Islandborn

Hello. Sorry if this question has been asked before but would like some clarification. I have 2 EVGA Super clocked ED. Titans on an MSI z77gd65 motherboard. The cards are with the stock fan/shroud. My question is that I probably would have to use the 2-3 way sli bridge due to the slot spacing, but I also have a Sound blaster  x-fi card buried between the 2 Titans using the PCI-e slot. Will I have an issue connecting the SLI bridge with the sound card being in the way? Thanks
Well like you said, you already have your rig Sli with that sound card, which I believe that sound card is smaller & tucked in the back, is the sound card touching the Sli bridge?...if not then it shouldn't be a problem with the Sli Pro.


*Lian Li PC-011D Mini (Black) *i9-10900K *ROG Strix Z490-G *Nzxt Kraken Z73/Lian Li UNI SL120 Series *Corsair Vengeance Pro RGB 64GB (4x16GB) DDR4 *Corsair HX1200i *EVGA GeForce RTX 3080 Ultra FTW3 *Samsung 970 Evo M.2 1TB *Samsung 960 Evo M.2 500GB *Samsung 840 Evo Series 1TB SSD *Asus ROG Swift PG43UQ *Corsair K70 MK.2 RGB *Corsair Dark Core *Corsair Gaming MM800 *Corsair ST100 *Razer Nari Ultimate.

 
 
#163
EVGA_JacobF
EVGA Alumni
  • Total Posts : 16946
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 14:43:32 (permalink)
That looks like 2 slots in between the cards? If so 3-way.
 
exilelrrp


So I'm guessing my set up would be a 3 or 4 Sli Bridge Pro?




#164
Islandborn
Superclocked Member
  • Total Posts : 131
  • Reward points : 0
  • Joined: 2013/02/26 15:44:14
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 14:56:04 (permalink)
exilelrrp

Islandborn

Hello. Sorry if this question has been asked before but would like some clarification. I have 2 EVGA Super clocked ED. Titans on an MSI z77gd65 motherboard. The cards are with the stock fan/shroud. My question is that I probably would have to use the 2-3 way sli bridge due to the slot spacing, but I also have a Sound blaster  x-fi card buried between the 2 Titans using the PCI-e slot. Will I have an issue connecting the SLI bridge with the sound card being in the way? Thanks
Well like you said, you already have your rig Sli with that sound card, which I believe that sound card is smaller & tucked in the back, is the sound card touching the Sli bridge?...if not then it shouldn't be a problem with the Sli Pro.


Thanks for the reply. My sound card is actually flush with the shroud on titans. My MSi SLI bridge is flexible so I don't have the problem of attaching it. It looks though as the EVGA bridges do not flex, so I just want to make sure.
#165
exilelrrp
iCX Member
  • Total Posts : 411
  • Reward points : 0
  • Joined: 2007/02/19 11:00:23
  • Location: BX INF
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 15:03:01 (permalink)
EVGA_JacobF

That looks like 2 slots in between the cards? If so 3-way.

Thanx I thought so, I was just comparing the images, well I did pick 3-way on that giveaway!
@ least when you purchase it & it does not fit, one can always send it back for an exchange of the right one.

*Lian Li PC-011D Mini (Black) *i9-10900K *ROG Strix Z490-G *Nzxt Kraken Z73/Lian Li UNI SL120 Series *Corsair Vengeance Pro RGB 64GB (4x16GB) DDR4 *Corsair HX1200i *EVGA GeForce RTX 3080 Ultra FTW3 *Samsung 970 Evo M.2 1TB *Samsung 960 Evo M.2 500GB *Samsung 840 Evo Series 1TB SSD *Asus ROG Swift PG43UQ *Corsair K70 MK.2 RGB *Corsair Dark Core *Corsair Gaming MM800 *Corsair ST100 *Razer Nari Ultimate.

 
 
#166
exilelrrp
iCX Member
  • Total Posts : 411
  • Reward points : 0
  • Joined: 2007/02/19 11:00:23
  • Location: BX INF
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 15:15:14 (permalink)
Islandborn

exilelrrp

Islandborn

Hello. Sorry if this question has been asked before but would like some clarification. I have 2 EVGA Super clocked ED. Titans on an MSI z77gd65 motherboard. The cards are with the stock fan/shroud. My question is that I probably would have to use the 2-3 way sli bridge due to the slot spacing, but I also have a Sound blaster  x-fi card buried between the 2 Titans using the PCI-e slot. Will I have an issue connecting the SLI bridge with the sound card being in the way? Thanks
Well like you said, you already have your rig Sli with that sound card, which I believe that sound card is smaller & tucked in the back, is the sound card touching the Sli bridge?...if not then it shouldn't be a problem with the Sli Pro.


Thanks for the reply. My sound card is actually flush with the shroud on titans. My MSi SLI bridge is flexible so I don't have the problem of attaching it. It looks though as the EVGA bridges do not flex, so I just want to make sure.
Yeah I see what you mean now, I looked up your Mobo & I know you cant compare SC vs On Board, but nowadays Mobo has really good 7.1 audio, the only solution for you is either use the On Board in order to use those Sli Pro or leave it alone if it ain't broken why fix it, I know having them Sli Pro make's great eye candy it's really on you there bro.


*Lian Li PC-011D Mini (Black) *i9-10900K *ROG Strix Z490-G *Nzxt Kraken Z73/Lian Li UNI SL120 Series *Corsair Vengeance Pro RGB 64GB (4x16GB) DDR4 *Corsair HX1200i *EVGA GeForce RTX 3080 Ultra FTW3 *Samsung 970 Evo M.2 1TB *Samsung 960 Evo M.2 500GB *Samsung 840 Evo Series 1TB SSD *Asus ROG Swift PG43UQ *Corsair K70 MK.2 RGB *Corsair Dark Core *Corsair Gaming MM800 *Corsair ST100 *Razer Nari Ultimate.

 
 
#167
vtruong84
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2013/07/20 14:19:23
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 15:34:58 (permalink)
Just curious if this SLI bridge will work with the Asrock Z87 extreme6?  There's an awkward amount of space between the 1st PCIe slot and 2nd.
 
I might be changing to the Asus Z87 Pro so can you let me know the compatibility on that one too?  Thanks
#168
exilelrrp
iCX Member
  • Total Posts : 411
  • Reward points : 0
  • Joined: 2007/02/19 11:00:23
  • Location: BX INF
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 15:45:59 (permalink)
vtruong84

Just curious if this SLI bridge will work with the Asrock Z87 extreme6?  There's an awkward amount of space between the 1st PCIe slot and 2nd.

I might be changing to the Asus Z87 Pro so can you let me know the compatibility on that one too?  Thanks
I believe a 3-way Sli Pro will work on That Asrock Z87 space you have there, I have the same space on my MSI Mobo Sli setup, same goes for that Asus Z87, basically 2 slot space between cards.


*Lian Li PC-011D Mini (Black) *i9-10900K *ROG Strix Z490-G *Nzxt Kraken Z73/Lian Li UNI SL120 Series *Corsair Vengeance Pro RGB 64GB (4x16GB) DDR4 *Corsair HX1200i *EVGA GeForce RTX 3080 Ultra FTW3 *Samsung 970 Evo M.2 1TB *Samsung 960 Evo M.2 500GB *Samsung 840 Evo Series 1TB SSD *Asus ROG Swift PG43UQ *Corsair K70 MK.2 RGB *Corsair Dark Core *Corsair Gaming MM800 *Corsair ST100 *Razer Nari Ultimate.

 
 
#169
Islandborn
Superclocked Member
  • Total Posts : 131
  • Reward points : 0
  • Joined: 2013/02/26 15:44:14
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 15:55:07 (permalink)
EVGA_JacobF

This is what it would look like



So to clarify, my Titans/mobo have a one slot spacing, so I assume the 2 way sli connector would be the way to go. The 2/3 way connector I assume will not work on a one slot setup? Any update on the 2 way sli and if EVGA will be designing a wider 2 way connector?

#170
EVGA_JacobF
EVGA Alumni
  • Total Posts : 16946
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 15:57:48 (permalink)
For one slot you will need the 2-way bridge, like below:
 



#171
vtruong84
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2013/07/20 14:19:23
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 16:06:12 (permalink)
exilelrrp

vtruong84

Just curious if this SLI bridge will work with the Asrock Z87 extreme6?  There's an awkward amount of space between the 1st PCIe slot and 2nd.

I might be changing to the Asus Z87 Pro so can you let me know the compatibility on that one too?  Thanks
I believe a 3-way Sli Pro will work on That Asrock Z87 space you have there, I have the same space on my MSI Mobo Sli setup, same goes for that Asus Z87, basically 2 slot space between cards.

 
The Asrock extreme4 looks to be the normal 2 slot spacing but the extreme6 has that mini-PCIe AC module... that's kind of why I thought the spacing was awkward.  Just wanted some confirmation though - if it fits the Asus then that makes my decision a lot easier :)  Thanks man!
#172
Islandborn
Superclocked Member
  • Total Posts : 131
  • Reward points : 0
  • Joined: 2013/02/26 15:44:14
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 16:06:24 (permalink)
^^ Jacob- Can you clarify if the 2 way sli bridge would seat onto the fingers if I have my x-fi card seated in between the cards in the PCI-e 1x slot? I am looking and the pcb board on the x-fi is flushe with the pcb boards on the Titans. I just want to make sure the x-fi will not keep the bridge from seating flush onto the fingers?
#173
CAxVIPER
CLASSIFIED Member
  • Total Posts : 2994
  • Reward points : 0
  • Joined: 2011/08/24 08:13:16
  • Location: South FL
  • Status: offline
  • Ribbons : 5
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 16:09:20 (permalink)
Islandborn

^^ Jacob- Can you clarify if the 2 way sli bridge would seat onto the fingers if I have my x-fi card seated in between the cards in the PCI-e 1x slot? I am looking and the pcb board on the x-fi is flushe with the pcb boards on the Titans. I just want to make sure the x-fi will not keep the bridge from seating flush onto the fingers?

As long as it isn't any taller it will be fine 
#174
EVGA_JacobF
EVGA Alumni
  • Total Posts : 16946
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 16:09:58 (permalink)
Yes it will be fine.


#175
exilelrrp
iCX Member
  • Total Posts : 411
  • Reward points : 0
  • Joined: 2007/02/19 11:00:23
  • Location: BX INF
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 16:16:15 (permalink)
Islandborn

^^ Jacob- Can you clarify if the 2 way sli bridge would seat onto the fingers if I have my x-fi card seated in between the cards in the PCI-e 1x slot? I am looking and the pcb board on the x-fi is flushe with the pcb boards on the Titans. I just want to make sure the x-fi will not keep the bridge from seating flush onto the fingers?
a picture of your setup can clarify your confusion.


*Lian Li PC-011D Mini (Black) *i9-10900K *ROG Strix Z490-G *Nzxt Kraken Z73/Lian Li UNI SL120 Series *Corsair Vengeance Pro RGB 64GB (4x16GB) DDR4 *Corsair HX1200i *EVGA GeForce RTX 3080 Ultra FTW3 *Samsung 970 Evo M.2 1TB *Samsung 960 Evo M.2 500GB *Samsung 840 Evo Series 1TB SSD *Asus ROG Swift PG43UQ *Corsair K70 MK.2 RGB *Corsair Dark Core *Corsair Gaming MM800 *Corsair ST100 *Razer Nari Ultimate.

 
 
#176
exilelrrp
iCX Member
  • Total Posts : 411
  • Reward points : 0
  • Joined: 2007/02/19 11:00:23
  • Location: BX INF
  • Status: offline
  • Ribbons : 1
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 16:17:25 (permalink)
vtruong84

exilelrrp

vtruong84

Just curious if this SLI bridge will work with the Asrock Z87 extreme6?  There's an awkward amount of space between the 1st PCIe slot and 2nd.

I might be changing to the Asus Z87 Pro so can you let me know the compatibility on that one too?  Thanks
I believe a 3-way Sli Pro will work on That Asrock Z87 space you have there, I have the same space on my MSI Mobo Sli setup, same goes for that Asus Z87, basically 2 slot space between cards.


The Asrock extreme4 looks to be the normal 2 slot spacing but the extreme6 has that mini-PCIe AC module... that's kind of why I thought the spacing was awkward.  Just wanted some confirmation though - if it fits the Asus then that makes my decision a lot easier :)  Thanks man!
No problem, that Asus Z87 is a nice looking Mobo.


*Lian Li PC-011D Mini (Black) *i9-10900K *ROG Strix Z490-G *Nzxt Kraken Z73/Lian Li UNI SL120 Series *Corsair Vengeance Pro RGB 64GB (4x16GB) DDR4 *Corsair HX1200i *EVGA GeForce RTX 3080 Ultra FTW3 *Samsung 970 Evo M.2 1TB *Samsung 960 Evo M.2 500GB *Samsung 840 Evo Series 1TB SSD *Asus ROG Swift PG43UQ *Corsair K70 MK.2 RGB *Corsair Dark Core *Corsair Gaming MM800 *Corsair ST100 *Razer Nari Ultimate.

 
 
#177
jsarver101
Superclocked Member
  • Total Posts : 241
  • Reward points : 0
  • Joined: 2013/02/25 18:10:00
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 16:22:04 (permalink)
jacob can you clarify if two, 2 way sli bridges will fit side by side. i know 2 aren't needed but i prefer that look.


Enthoo Elite - Asus Rampage - 9900x 4.6 @ 1.26v - 32GB Gskill Trident RGB 3200mhz - RTX 2080Ti FTW3 - Corsair 1500i - Samsung 960 Evo 1Tb NVMe - Samsung 840 Pro 512 SSD - Samsung 850 Pro 1Tb SSD - Samsung 840 Evo 1Tb SSD- Corsair H110i - ROG Swift @ 1440p w/ Gsync x3
 
#178
EVGA_JacobF
EVGA Alumni
  • Total Posts : 16946
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 16:36:55 (permalink)
I double checked and yes it fits.


#179
killuchen
FTW Member
  • Total Posts : 1500
  • Reward points : 0
  • Joined: 2008/07/08 20:49:02
  • Location: New Port Richey, Florida
  • Status: offline
  • Ribbons : 3
Re:EVGA Pro SLI Bridges + Giveaway! 2013/08/13 16:41:30 (permalink)
Here's a picture of my setup. Would you just suggest a 2way or the 3/2way?
 


Stream: http://www.twitch.tv/killuchen
Heatware: http://www.heatware.com/eval.php?id=74745&eval=613470
   
   
   
   
 
#180
Page: << < ..678910.. > >> Showing page 6 of 31
Jump to:
  • Back to Mobile