Thanks for the info on the high flow.
Just put the the backplate in my basket from the products site and EVGA were ready to take payment?
Go to accessorys-Titan backplate- add to cart- ready for payment that what it is telling me???? 
There is no notify if you go that way they are ready to take payment strange this one.
One part of the site says notify the other part of the site no probs??????????

OK, got my 2-way SLI Bridges in, i realy liked the 3-way better for those who have the Maxmus V Formula 2-way Bridge is your only option, 3-way and 4-way will not work on this Board.

 

Wow, nice to see a fit for Maximus V Formula!  I've been holding on buying since I measured 65mm with 2 titans on the top two PCIe(s) like your config (thou I think card wouldn't matter, right?). 
Have you seen any improvement using 2 bridges?




I never realy tested and i highly doubt there is any performance gains, this is an ancient argument on the Forums whether they improve or not. i wanted the 3-way because it fills more space so i got 2x to kind of fill up the space. i always used 2 bridges anyways out of superstition it will improve

I don't know if any one has asked the question or not?
But will the 3 way fit the Asus Rampage IV extreme In slots 1 and 4
as per the manual for SLi/CF
Using two Titans?

jacob650
 
No force at all, it fits perfectly fine. but the 2-way has this chrome piece where it illuminates and that is kind of cheap, i was hoping it will look like the 3-way/4-way with a flat black finish look . but oh well, i am pretty sure this is the beginning of a new age of SLI bridges , soon people will no longer buy the cheap strap look and buy into the new sleek aluminum design, ASUS, MSI, ASrock and all other companies will eventually follow , each with their own sleek design. I'm glad EVGA had the guts to begin with it

Yeah, props to evga for their ingenuity.  Thanks for your help, your picture and input made me pull the trigger on this one.

Just ordered the 2 Way Bridge, will it light up with the EVGA 760 FTW 4GB?

EVGA Classified 3
which bridge can i use for this setup , if you look at this image my titans are where the green dots are, i dont know if the pci counts as a slot or not lol or are we just counting sli express slots
 

Installed 2-way Bridge:
 

2-2 way bridges? just for looks?
 

 
Yep....
 

hope the necro isnt in bad taste on this post... i followed a link from the pro sli page and read the whole thread through. im still not certain there is an appropriate bridge that i can use on my 770 classifieds... 
 
im a micro-atx plat-former and will have 2 way sli soon, double width cards with no spacing. from what i gathered at the end of the thread it is permissible to use the 3 way bridge for 2 cards but the product page indicates that 2 way usage for the 2/3way bridge is intended for double width double space. could someone in the know please clarify whether the 2/3 way bridge will accommodate 2 way sli for double width/ no space? if it is permissible should i make sure the top/ middle connections are used or does it not make any difference...
 
ps first post... i think
 
EDIT:
 
so i wasnt familiar enough with the message board to realize that the page count caps out 5 pages above your initial link... i finished reading the thread: (backwards from my post) and realized that it was confirmed that 40mm spacing was acceptable for double width no gap layouts... if anyone happens to come across this post, it would be nice to know beforehand if there is any directive towards a primary sli connector or not with these bridges... basically im asking if it matters whether the extra sli connection hangs below the lower card or if i have to have it sticking up towards the cpu, (there are no physical constraints for this in my case as both directions are free of obstruction.)
 
EDIT #2:
 
avie above this post: rogue helmet on ghost town... awesome map 

^thanks, i'll pick up the 2/3 way when it gets back in stock. 
 

look really good!

Deleted.

Not all cards support the LED function. Only cards that use the new SLI finger circuitry. For that you will have to contact MSI.

So does the L.E.D light work on the GTX 760 card ? I just bought 2 EVGA 760 GTX cards and was hoping this would work with the cards ?