PietroBR

AdmiralDonut

PietroBR

AdmiralDonut
Currently unable to change the lighting on my GPU using 6.2.4. Clicking the LED Sync button does nothing, and the appearance LED option in the settings menu is greyed out. Previous XOC was uninstalled cleanly, as was Flow Control, then the EVGA folder was deleted as well to ensure a proper clean start. I have the 1080 FTW.

Try checking if it didn't open directly minimized on the tray.
If LED Sync is enabled, then, the LED tab into configs will be disabled (you should change led colors via LED Sync).

Also, try to make a full power off on your pc:
1- Shut down PC.
2- Disconnect it from the wall
3- Disconnect any other cables that can flow energy into the PC
4- Press power button of the case for 30 seconds to discharge it
5- Power on everything.

Most of the times it solves some incompatibility issues.

Two full cold restarts made no difference. I had to go into the EVGA folder on the C: and manually start the LED Sync program. It is now working, but I will have to manually start LED Sync every time I start up the computer.

What about a redownload and reinstall of PXOC?
 

It might happened something during the first install that it didn't proper installed maybe?

 
What about a redownload and reinstall of PXOC?
 
I have uninstall both Flow Control, PXOC and Led Sync by Windows Apps & Features which is total remove and restart Windows.
Delete any EVGA folder and run CCleaner after finish CCleaner do restart Windows Once.
At the Start up Windows let them running background finish before install both Flow Control and PXOC.
Test and everything is okay but it still bit slow down when I every open any Apps or using MS Edges made windows slow down few secs....while PXOC running so when PXOC is closed everything is normal!!! Need check this cause windows slow down every open any program Apps....
 

PietroBR
 

What about a redownload and reinstall of PXOC?

It might happened something during the first install that it didn't proper installed maybe?

I'd already re-downloaded it twice. Same for Flow Control. Nothing wrong with the download, and for once nothing wrong with Windows either. It just seems as though LED Sync refuses to show up until you manually start it, even though XOC and FC are convinced it is actually running.

AdmiralDonut

PietroBR
 

What about a redownload and reinstall of PXOC?

It might happened something during the first install that it didn't proper installed maybe?

I'd already re-downloaded it twice. Same for Flow Control. Nothing wrong with the download, and for once nothing wrong with Windows either. It just seems as though LED Sync refuses to show up until you manually start it, even though XOC and FC are convinced it is actually running.

Damn.
That's odd.
Mine is working fine.
Open PXOC and directly click on Led Sync button and it just pop up on the screen.

EVGA_JacobF
Available now!
 
https://www.evga.com/precisionxoc/
 
Version 6.2.4

• OSD control is now handled in the “HWM” section. Click the dropdowns at top to add/remove monitoring and select icons to show where to monitor it.
• Adds support for EVGA Z10 Keyboard display
• Increase number of GPU’s supported
• Add bootup splash
• Various bug fixes and GUI improvements

 

 
I think the boot up splash (Maybe? I don't currently have a PC, sadly) may be irritating some people (they call it a badge tho)....perhaps tone down the time it stays on screen?
 

I've been trying for 2 days to do a very simple thing:
 
Set my fan controller to a default profile that will load on bootup.  I can't for the life of me get this to work.  And after two days of reading forums without success I am totally mad over it.  Take your software and shove it.  My next graphics cards will not be EVGA.  
 
 

dual109
HI,
 
Anyone confirm if manual overclocking has been fixed using the Voltage/Frequency curve, absolutely retard in previous version. ??????

Manual Overclocking still does not work. Going back to 6.1.14
 

This was the #1 item I was hoping would be addressed... It's a HUGE let down that EVGA, a well established and generally well respected company, is unable to produce a fully functioning utility for their graphics cards.
 
Edit: This is in regards to manual overclocking.. not sure why my reply didn't include what he said.
 
@EVGA_JacobF - Would it be possible to obtain a list of known issues?

It's kind of pathetic a company like EVGA puts out software of this quality.
 
I have to set my fan curve every time I boot my PC for my 1080TI SC2 Hybrid. I have to re-select what I want shown on the hardware monitor on every boot. All of my other apps to go where they were last opened except for EVGA Flow Control and EVGA Precision. I have to drag them over to my second monitor every time. I had hopes that the updated Precision I downloaded would resolve at least one or two of these issues, but basic stuff like settings sticking I guess are just too difficult to address.

PietroBR

dgr111
Anyone find the 'OSD Settings' in this version or has it been removed? It makes this OSD completely useless to me with the basic details it shows. Doesn't even show FPS.

EVGA_JacobF
 
Version 6.2.4

• OSD control is now handled in the “HWM” section. Click the dropdowns at top to add/remove monitoring and select icons to show where to monitor it.
• Adds support for EVGA Z10 Keyboard display
• Increase number of GPU’s supported
• Add bootup splash
• Various bug fixes and GUI improvements

 

It's literally in the first post telling you how to display the OSD.

Or do you mean to show other infos on the HWM?
If so, there should be, on the middle top of HWM, "GPU1 / SYSTEM", which you click on SYSTEM and you can select what will be displayed on the HWM. Same goes to the GPU1.

I asked about the 'settings'... not how to display the OSD.  And for the record... my dropdowns don't appear while in focus unless I'm resizing so I didn't even see them.  I have to put the window out of focus to make them display so that I can click on them.  Repeat each time I want to see or select the dropdown.

serge1940

Sajin

serge1940
I get an error every time I start up XOC. it says: Error CoInitializeEx [OK]
clicking OK closes the program... that's it. o.O

Looks like that means xoc is conflicting with another program... 

edit: I stand corrected. Nahimic audio software was the cause of interference.

@Sajin - how did you fix it? Did you close out of Nahimic? 

7thfret

serge1940

Sajin

serge1940
I get an error every time I start up XOC. it says: Error CoInitializeEx [OK]
clicking OK closes the program... that's it. o.O

Looks like that means xoc is conflicting with another program... 

edit: I stand corrected. Nahimic audio software was the cause of interference.

@Sajin - how did you fix it? Did you close out of Nahimic? 

I wasn't the one with the issue, serge1940 had the problem. I'm guessing he just closed nahimic.

scafidmjevga
It's kind of pathetic a company like EVGA puts out software of this quality.
 
I have to set my fan curve every time I boot my PC for my 1080TI SC2 Hybrid. I have to re-select what I want shown on the hardware monitor on every boot. All of my other apps to go where they were last opened except for EVGA Flow Control and EVGA Precision. I have to drag them over to my second monitor every time. I had hopes that the updated Precision I downloaded would resolve at least one or two of these issues, but basic stuff like settings sticking I guess are just too difficult to address.

Some of the posts in this thread may help with 1 or 2 of your issue's > https://forums.evga.com/Precision-XOC-load-a-profile-at-windows-start-up-m2703979.aspx
 

clc 280 still not detected 
 
 
 

I just found why this PXOC cause my Windows slow down every time I open any Apps or Microsoft Edge. The Profile in PXOC setting > Profile when I save profile 0 and then select 2D and 3D for profile 0 that cause my Windows slow down every 10 sec or open any apps! So I have remove Profile 0 to not assigned 2D and 3D bang My Windows went back normal smooth and no more slow my Windows then I cannot load profile 0 at Windows Start up so I have to use Manuel click profile 0 button icon to load okay and those fans is not automatic when I have enable Auto Fans in Setting. 
 
everything is good but just need look at Fan will not load at start up Windows and Profile save in 2D and 3D setting cause my Windows slow down every few sec or open any apps. 
 
 

PietroBR

coolmistry
I just found why this PXOC cause my Windows slow down every time I open any Apps or Microsoft Edge. The Profile in PXOC setting > Profile when I save profile 0 and then select 2D and 3D for profile 0 that cause my Windows slow down every 10 sec or open any apps! So I have remove Profile 0 to not assigned 2D and 3D bang My Windows went back normal smooth and no more slow my Windows then I cannot load profile 0 at Windows Start up so I have to use Manuel click profile 0 button icon to load okay and those fans is not automatic when I have enable Auto Fans in Setting. 
 
everything is good but just need look at Fan will not load at start up Windows and Profile save in 2D and 3D setting cause my Windows slow down every few sec or open any apps. 

Nice.
I'm sure others will find it very helpful your troubleshooting.
Thanks for sharing! 

Cheer pal! Yeah let hope everyone find this cause! Hope it help EVGA team can find this bug!!!  I think this Version is much better at the moment!!