Thanks for the updates. Hopefully this helps the users.

rsabatino
it is not there I read on twitter that you have the update I came right over and its not there. its just not there I will be ok.

Huh? You may not be signed in. Make sure you are signed in to the main EVGA webpage.

EVGA_JacobF
www.evga.com/precision
 
Version 6.1.12
Release: 7/25/2017

• Fix power & memory fan swap in software fan curve control on iCX cards.
• Fix power & memory fan swap in hardware monitor on iCX cards.

Thanks Jacob for the update once again!
I'm going to see what it does on my FTW3, if I see any issues I'll just edit this post.
 
PS: Does anyone know if this behaviour is expected on the 1080Ti FTW3?
https://forums.evga.com/FindPost/2698453
I've yet to check it out on 6.1.12 however.
 
Update 26-07-2017:
 
Precision XOC 6.1.12 also refuses to run here with the 1080Ti FTW3.
First it pops-up the GUI, then it reloads and crashes on 'PrecisionX_x64.exe'
 
Done a clean install, uninstalled XOC 6.1.11 -> rebooted -> cleaned leftover .cfg files -> installed XOC 6.1.12.
Neither a firmware update was offered for the 1080Ti FTW3.
-Windows 7 Ultimate x64. (fully patched)

Keeps loading up then shutting down with an unknown problem

Wow, that was fun... /s
 
Excitedly installed 6.1.12 over pre-existing 6.1.11 and Precision crashed along with causing my TV to go completely black. Had to do a hard restart and the issue happened again.. I was able to end the Precision process, performed a clean uninstall (uninstalled and deleted C:\Program Files x86\EVGA) reinstalled and Precision crashed again. Luckily my monitor didn't black out this time.
 
 - How can something like this get through engineering before being released?
 
I can understand not being able to account for countless hardware/software configs but this seems to strictly be an issue with precision.
 
- Wasn't the previous version pulled for an issue as well?
 
Windows Event details:
 
Log Name: Application
Source: Application Error
Date: 7/25/2017 11:38:58 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: DESKTOP-3UQVR0A
Description:
Faulting application name: PrecisionX_x64.exe, version: 6.1.12.0, time stamp: 0x59771128
Faulting module name: PrecisionX_x64.exe, version: 6.1.12.0, time stamp: 0x59771128
Exception code: 0xc0000005
Fault offset: 0x000000000009d609
Faulting process id: 0x1890
Faulting application start time: 0x01d305d9d243166c
Faulting application path: C:\Program Files (x86)\EVGA\Precision XOC\PrecisionX_x64.exe
Faulting module path: C:\Program Files (x86)\EVGA\Precision XOC\PrecisionX_x64.exe
Report Id: a8715089-88ca-4519-a906-18881653041d
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2017-07-26T06:38:58.860241400Z" />
<EventRecordID>11741</EventRecordID>
<Channel>Application</Channel>
<Computer>DESKTOP-3UQVR0A</Computer>
<Security />
</System>
<EventData>
<Data>PrecisionX_x64.exe</Data>
<Data>6.1.12.0</Data>
<Data>59771128</Data>
<Data>PrecisionX_x64.exe</Data>
<Data>6.1.12.0</Data>
<Data>59771128</Data>
<Data>c0000005</Data>
<Data>000000000009d609</Data>
<Data>1890</Data>
<Data>01d305d9d243166c</Data>
<Data>C:\Program Files (x86)\EVGA\Precision XOC\PrecisionX_x64.exe</Data>
<Data>C:\Program Files (x86)\EVGA\Precision XOC\PrecisionX_x64.exe</Data>
<Data>a8715089-88ca-4519-a906-18881653041d</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
 

Thanks for the updates!

Wow this version just will not run for me. Have tried installing three different times, each time when I launch the program very shortly after it runs into a problem and closes. Going to have to go back a version for this one.

d.burnette
Wow this version just will not run for me. Have tried installing three different times, each time when I launch the program very shortly after it runs into a problem and closes. Going to have to go back a version for this one.

Exactly the same thing happening with me . I got my brand new card 1 day ego , i was using 6.1.11 then i saw update posted so tried to use it and getting always crash and Not working message then when i install 6.1.11 version again then all ok again . Also for 6.1.11 version that Memory fan slider not moving i noticed .

d.burnette

Blackshadow007

d.burnette
Wow this version just will not run for me. Have tried installing three different times, each time when I launch the program very shortly after it runs into a problem and closes. Going to have to go back a version for this one.

Exactly the same thing happening with me . I got my brand new card 1 day ego , i was using 6.1.11 then i saw update posted so tried to use it and getting always crash and Not working message then when i install 6.1.11 version again then all ok again . Also for 6.1.11 version that Memory fan slider not moving i noticed .

Yep I installed 6.1.11 again and all is well for me now, at least in getting the program running. That memory fan slider is just a visual bug in this particular version, the fan is working properly just initially the button does not represent that. You can click on the button to get it to display properly.
Never could get 6.1.12 to run...
 

That's good to know about click thing , i am very new with this stuff .. so its pretty confusing for me lol , since this FTW 3 is beast with lot of functions xD but seems like that new 6.1.12 version never let me start but 6.1.11 fine whenever i install . I found in the forum someone mentioned that it can cause for corsair Link software so i did uninstall Corsair link and restarted pc then saw issue not solved 6.1.12 still crashes immediately after start .
 
Also can you tell me whats that little link thing do under the 3 Fan curve line ? , i see those unlinked by default .

It crashes right after it starts.
 
 
Back to 6.1.6 I guess.

XOC - Xtremely Often Crashing

Does the XOC team work in a time vortex? How is .6, the ZeroDay FTW3 release version, the best and most stable version of XOC, while a version 6 "improvements" later can't even launch? This is madness. Untested code is broken code.

To get you started, step one of testing is launch the program, on a non-development machine.

No offense to EVGA because I love them as a company, but how do you not test out your software before publishing it out?  Crashing for me upon loading as well.

siraltus
Version 6.1.12 crashes when selecting a fan profile with "EVGA Precision X has stopped working." EVGA 1080Ti FTW3 on Asus X99 II Deluxe and Windows 10 Professional. Nvidia driver 384.94.

Same here.
Updated via Steam.

The update that was released yesterday crashes when I run it. I'm running an EVGA FTW 3 1080Ti.