bcavnaugh

Sajin

bcavnaugh

Sheesher

EVGA_JacobF
3-way in stock!!

No wonder these bridges are going out of stock so fast, people are just buying in bulk and reselling for ridiculous prices on Ebay >:[
 
Image Removed
 
@EVGAJacob_F Can you please do something about this, like put a purchase limit of 1-2 or something?

It really is a bummer that users do this.
Start a boycott against eBay. eBay because eBay is holding their money.

If you're spending $3000-5000 on PC hardware and extra $160 isn't going to hurt.  

Just rub it in even more. I wish eBay would fold, pun is intended.

I hope they'll just put a purchase limit of 1-2 to deter scalpers from doing this

RepellentJeff
I'm having trouble figuring out what bridge will work with my setup. I have an ASUS Sabertooth z77 motherboard.

I have two GTX 780's on this board. One in the long beige slot, and the first long brown slot.

You need the 2 way long. :-) (60mm)

Two Cards running in 2-Way SLI
Two Cards are 40mm between them when installed next to each other with NO open Slot. P/N: 100-2W-0024-LR
Two Cards are 60mm between them when installed with two open Slots between them. P/N: 100-2W-0023-LR
Two Cards are 80mm between them when installed with three open Slots between them. P/N: 100-3W-0032-LR
 
Each Slot is 20mm apart from each other. Each Two Slot Graphics Cards are 40mm Wide.
Even if you have a open space as the above MB the space is still 20mm no slot 40mm to the next slot.
 
60mm between Cards so I would need the 2-Way Long Bridge. P/N: 100-2W-0023-LR on the X79 Dark Motherboard.
 
Remember that your Goal should be to have your Two Graphics Cards install into the Two X16 Slots on your Motherboard.
So remember to keep that in mined as well.
 
And for my GTX 690 Cards I would need a Single Wide Bridge that is spaced 80mm apart or 8cm Most Duel GPU Cards would need this one.
But no one makes one so we are stick with the Ribbon SLI Cable.
 
 
Standard Slot Spacing. Click on Image for Larger View
Each Slot is 20mm Apart

RepellentJeff
Are you sure? Because last night I measured the distance between the sli pins on the cards, and the distance is around 75mm.

60mm between Cards so you would need the Long 2-Way Bridge. P/N: 100-2W-0023-LR as Scarlet-Tech said above.

NordicusMaximus
I have 2 GTX 770 4GB Classifieds, 04G-P4-4778-KR....How could these be left out of the equation???? I was always shown by EVGA specs and advertising the Classified outranked FTW and SC cards, with only Reference Design cards being higher....So lesser cards can use the lighted bridges, but I'm left out with my cards?

 
Left out From what Equation?

Thanks EVGA! :D
 

bcavnaugh
Not for me, I need 4 3-Way and now I have to pay Shipping 4 times.

Contact EVGA directly. I am sure they will work with you since your stuff is registered.

bcavnaugh
Here comes the 4-Way.
 
Click on Image for Larger View + 2 Times Zoom 

 
 

that is a sick setup man

 

EVGA_JacobF

bcavnaugh
Here comes the 4-Way.
 
Image Removed.

Wow very nice.

un4givn85

bcavnaugh
Here comes the 4-Way.
 
Click on Image for Larger View + 2 Times Zoom  
Image Removed.

that is a sick setup man

Thank you very much EVGA_JacobF & un4givn85
 
This is my post for that rig: X99 Classified The Beast or The X99GTX980Cruncher Completed!

mcbirds
Hello everyone,
 
I'm a scrub and can't tell if I would need a 3 way or 2 way long. I have a Z97X-Gaming 7 mobo by Gigabyte.

I have a 980 ACX SC in the top x16 slot and another in the x8 slot.
 
Thanks in advance!

See Post http://forums.evga.com/FindPost/2333164
 
This is your Motherboard>? http://www.gigabyte.com/products/product-page.aspx?pid=4959#ov
 
Wow! that MB only has ONE X16, from what I can tell you will need the 60mm or Long one.
 

TY that is what I ordered. Was just double checking.

The 2-way Long is all I need to complete my build (ASUS SABERTOOTH X99 w/ EVGA GeForce GTX 970 SSCs) -- waiting as patiently as possible for them to become available! Come on EVGA, send me that auto-notification! :-D

Hello. What sli bridge do i need for my setup ?
 

Andrius227
Hello. What sli bridge do i need for my setup ?
 

3 way. If you scroll back one or two pages, you will see everyone else with the exact same board and answer.

seta8967
So it would be a 2 way skip a slot (with physx card that doesn't need sli) and then 4card. I think you would need a 4 way, but I am not sure that a 4 way you can skip the 3rd slot and still work.

Test the card in 2 way, then remove the middle fingers. That is exactly what I did, and with 3 of the exact same cards didn't get much difference (780ti's) in games. Using it as just a 3 way setup had a much greater effect. Just use the bridge, and select the center card as PhysX dedicated.

How many companies release a bridge specific for PhysX? I have never seen one, as only a few would actually sell.