Just to let folks know, the mini Display Port works with VGA adapters.  So if you wanted to use the iGPX (iGPU) for an older monitor, you can.  Or do what I did, use the iGPX for main display and the 650Ti GPU solely for folding/crunching. 
.
Advice for EVGA, for the price of the board that we paid, it would have been nice to have a mini Display Port to DVI adapter.  Not everyone has or uses a HDMI port.
.
The Z77 Stinger is still folding on for the fouth day straight.  Seems to be holding its on, but is still touchy when adjusting settings.  Change just one setting the wrong way, puff, UEFI crash.  Then I got to press the clear CMOS button and re-enter all my settings except the last one I changed.

For what the device drivers say, it is Ver. 3.0.

some of the stuff for the danger den build!!! i probly should of gone with a smaller pump but oh well. had to order a smaller tube res for it to fit
 
 
 
 
 
 

I've only had 1x occurence of complete video loss.  Thou the system still seemed like it was working.  I just had to do a hard reboot and everything came back as normal.
 
Like I promised, I have been abusing the Z77 Stinger with folding and crunching.  So far, it seems stable and does hold a 3.8GHz overclock.  I may take it higher since it has some cooling overhead.

Dang these BIOS are touchy.  Just wanted to give the CPU a boost in speed, went from 3.8 to 4.0 and then it crashed.  CMOS reset later and re-entering all the settings again, except the last change, it works.  I think a BIOS update is needed.

ya can't overclock worth crap here either.  my shi*ty Biostar board before this ran better with its stock bios.  the stinger is a sick looking board, just hope the bios eventually lives up to the looks.
also, does anyone know what that jumper beside the cpu power connector is for? little nervous to test it out myself.

I wonder that myself when I rebuilt Quartz.  I didn't bother with it since I didn't know what it does.

savaticus

LearjetMinako
I think a BIOS update is needed.

Yeah, and I check the forums everyday waiting for the post from Jacob saying it is available. :) 

It would be nice if EVGA could send an email to registered owners of any BIOS updates. Or any updates to any EVGA products. That way we don't have to read a forum to check. I hope Jacob reads this.

ugh this bios is driving me nuts.  i think my girlfriend might dump me if i spend anymore time trying to tweak it.  if she dumps me, i'm blaming you EVGA.  keeping it stock for now until a bios update comes out.

Well my stingers PCI Express slot just stopped working. Gotta wait till Wednesday to even begin the RMA process :(

Seems like there are a  lot of issues with this board.  I kept wondering why my H60 was making a humming noise all a sudden but found out from unplugging it that this board is also making some sort of whine/clicking that is rather irritating. 

this is really disappointing to read everyone having issues with this board. i ordered mine a couple days ago, and i plan on watercooling the cpu, nb, mosfets, ram, and gpu. we'll see if i have any of the mentioned problems when i get mine in the mail.

I'm hoping all these issues will be cleared up with the release of an updated BIOS for this board.
I got mine a couple of weeks ago, and at first I couldn't even get it to post. A6 error message.
After many attempts and a lot of fiddling, I finally was able to install windows 7 and all necessary updates and drivers.
The system was off for a couple of days and now I can't get online with it, it says : "no networking hardware found".
Have tried installing drivers on the CD three times, no go. The EVGA website only has network drivers for Windows 8, which I think is pretty stupid.
I'll try a clean install of OS, I just hope I don't need to RMA it.

 

 
Mhhh, seems something is wrong withs the voltages :P
That's not really what it's reported in the Bios, and i'm not sure my PC would run with that kind of voltages, so do i have a driver issue? 

Ya, those are some funky voltages.  You may want to get a PSU voltage tester just to rule out any hardware issues with the PSU first.