gremlinforce007
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2021/01/07 05:57:21
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/18 18:35:19
(permalink)
I've managed to clock: 100 and 1000 on memory stable
|
samueloa84
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2020/12/20 20:03:06
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/19 07:20:16
(permalink)
Drwaffles
samueloa84
Remember that the tuff is 1740mhz (or 1780 OC model) boost clock, the FTW3 Ultra is 1800 MHz and has a higher power limit..
Need to look at the end frequency and power draw, not the offset in Afterburner.
It'll still outperform the tuff even at lower clocks once it's gone past the power limit of the tuff.
Only one question, is safe keep the core voltage at 100% in afterburner? thank u so much.
|
doug2507
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2008/06/15 10:13:16
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/20 09:24:19
(permalink)
Don't normally post here but thought I'd share this.... 3080 ftw3 on air with 5950x on water. All ambient, no chillers, rig inside the house. Looking forward to a water block arriving! Thank you EVGA!
post edited by doug2507 - 2021/01/20 09:28:27
Attached Image(s)
Silverstone TJ07B-W Tagan BZ-1300 EVGA 790i Ultra, P07, 15.23 QX9650@4.28ghz (450x9.5) 4GB OCZ Platinum EB DDR3-1600, 7-7-7-24-2t-2.0v@1800mhz 2x EVGA GTX 280 SLI(1xVanilla/1xSC). 182.08 (741/1566/2538) 4x500gb Sata-300 Barracuda Pioneer 215BK Asus D2X/XDT Vista Home Premium 64 Dell 2408WFP http://service.futuremark.com/compare?3dmv=852389 27,097 
|
mr_allroy
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2020/12/13 13:48:11
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/20 12:50:10
(permalink)
stormtroopa
ThetaZero
Can we please get the original BIOS linked in this thread so we can revert? The 3090 thread has this, but the 3080 doesn't.
I'm still waiting on a verified original BIOS from EVGA as well.
I would also like to get my hands on these BIOS as TPU doesn't show which is for Normal mode and OC mode and I'm not experienced enough to take my chances. Thanks in advance!
|
Drwaffles
New Member
- Total Posts : 95
- Reward points : 0
- Joined: 2015/12/29 14:57:48
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/20 18:28:48
(permalink)
EVGA cover overclocking under warranty anyway.
I set my voltage to 80% but set the temp limit to 65 until my waterblock arrives.
As for long term reliability, I personally think temps are a bigger issue than voltage.. But over the course of 3+years who knows, it's a brand new chip.
|
samueloa84
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2020/12/20 20:03:06
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/20 18:33:32
(permalink)
Drwaffles
EVGA cover overclocking under warranty anyway.
I set my voltage to 80% but set the temp limit to 65 until my waterblock arrives.
As for long term reliability, I personally think temps are a bigger issue than voltage.. But over the course of 3+years who knows, it's a brand new chip.
hello, you know if its safe put the core voltage in afterburner at 100%? thanks in advance!
|
tskrzynecki
New Member
- Total Posts : 39
- Reward points : 0
- Joined: 2021/01/20 17:43:28
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/21 19:15:50
(permalink)
Has anyone heard about 3080 ftw3 hydro copper? When can we get in line?
|
pfeitosa
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2020/06/29 17:12:16
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/22 16:22:38
(permalink)
Would love to see a similar "BIOS that increases the maximum Power Target" for the 3070 FTW3 ULTRA GAMING, 08G-P5-3767-KR. In the past I upgraded a 2060 Super with a BIOS provided by Jacob, and it lifted it's 175w limit to 215~220w, with great results.
|
ParaWM
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2021/01/23 08:58:50
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/23 09:05:56
(permalink)
Just flashed this 450w bios, but not really any improvement. I can't get the card to use over 400w in any benchmark. All sliders maxed out. It doesnt seem to use the max voltage most of the time either. I know the mhz limit is around 2115, if it goes to/over 2130 it crashes. It does go over 1050mV (upto 1093mV) on rare occasions. But it usually hovers around 2055-2070 mhz @ 1012-1050mV @ 370-390watt or so. Any reason it is not using max power? Temps roughly 65°C. 3440x1440 resolution. Or any benchmarks / tips to make it use the full 450w? Flash is confirmed in GPU_Z, but I am not even sure everything is ok, as I have never seen it over 400w basically. Using MSI Afterburner with the voltage slider working.
|
LocutusHUN
New Member
- Total Posts : 89
- Reward points : 0
- Joined: 2020/11/20 11:44:57
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/23 10:24:13
(permalink)
Can someone please clean up the bios versions?
Wich version goes where, and what does it do?
Are there changelogs somewhere?
Were the 1st post bioses updated ever?
Are there updated normal bioses, or just XOC?
Some sites and forums have bios files flying around, where no one can know what they are, and where they belong.
For example what i found:
94.02.26.80.70 - my 3080 FTW3 Ultra, stock normal bios.
94.02.26.48.68 - ?
94.02.26.48.AE - ?
Even EVGA support sent me some for trying, where the version can not be seen anywhere (until i flash it i guess). But they wont tell me, if its the same as XOC or not.
X470 Taichi Ultimate, 3700X, 32GB 3600 Ballistix, eVGA 3080 FTW3 Ultra, Seasonic Prime Titanium 850W, LG OLED55CX 4K120
|
jimgrandbois
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2020/11/24 05:24:19
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/23 15:03:09
(permalink)
ParaWM
Just flashed this 450w bios, but not really any improvement. I can't get the card to use over 400w in any benchmark. All sliders maxed out. It doesnt seem to use the max voltage most of the time either. I know the mhz limit is around 2115, if it goes to/over 2130 it crashes. It does go over 1050mV (upto 1093mV) on rare occasions. But it usually hovers around 2055-2070 mhz @ 1012-1050mV @ 370-390watt or so. Any reason it is not using max power? Temps roughly 65°C. 3440x1440 resolution. Or any benchmarks / tips to make it use the full 450w? Flash is confirmed in GPU_Z, but I am not even sure everything is ok, as I have never seen it over 400w basically. Using MSI Afterburner with the voltage slider working.
I’m still having this exact same problem...gone so far as to nuke and reinstall windows fresh, have tried just about everything I can think of with the same results. At this point, I guess I just fall into the “we don’t guarantee increased performance” Jacob listed, maybe it’s why it’s labeled beta? I just wish there was some way to confirm my card can’t do more than 400w because of (x) reason even though my power target is 450w
post edited by jimgrandbois - 2021/01/23 15:05:48
|
kraade
CLASSIFIED Member
- Total Posts : 2385
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: offline
- Ribbons : 7
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/23 16:42:17
(permalink)
jimgrandbois
ParaWM
Just flashed this 450w bios, but not really any improvement. I can't get the card to use over 400w in any benchmark. All sliders maxed out. It doesnt seem to use the max voltage most of the time either. I know the mhz limit is around 2115, if it goes to/over 2130 it crashes. It does go over 1050mV (upto 1093mV) on rare occasions. But it usually hovers around 2055-2070 mhz @ 1012-1050mV @ 370-390watt or so. Any reason it is not using max power? Temps roughly 65°C. 3440x1440 resolution. Or any benchmarks / tips to make it use the full 450w? Flash is confirmed in GPU_Z, but I am not even sure everything is ok, as I have never seen it over 400w basically. Using MSI Afterburner with the voltage slider working.
I’m still having this exact same problem...gone so far as to nuke and reinstall windows fresh, have tried just about everything I can think of with the same results. At this point, I guess I just fall into the “we don’t guarantee increased performance” Jacob listed, maybe it’s why it’s labeled beta? I just wish there was some way to confirm my card can’t do more than 400w because of (x) reason even though my power target is 450w
same here, My crash number is 2145, I think a get peaks about 433w but its not close to pulling 450w ever.
|
doug2507
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2008/06/15 10:13:16
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/27 09:06:09
(permalink)
The quality of those cards and the conditions in which they are run do not require more power than thay are already drawing.
post edited by doug2507 - 2021/01/27 10:12:42
Silverstone TJ07B-W Tagan BZ-1300 EVGA 790i Ultra, P07, 15.23 QX9650@4.28ghz (450x9.5) 4GB OCZ Platinum EB DDR3-1600, 7-7-7-24-2t-2.0v@1800mhz 2x EVGA GTX 280 SLI(1xVanilla/1xSC). 182.08 (741/1566/2538) 4x500gb Sata-300 Barracuda Pioneer 215BK Asus D2X/XDT Vista Home Premium 64 Dell 2408WFP http://service.futuremark.com/compare?3dmv=852389 27,097
|
ParaWM
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2021/01/23 08:58:50
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/27 12:58:23
(permalink)
doug2507
The quality of those cards and the conditions in which they are run do not require more power than thay are already drawing.
When undervolting, it becomes pretty clear that for each (lower) voltage you can set a max frequency before it crashes. I would think that for overclocking, if it would at least pull (close to) its max 1093mV more consistently, it might be stable a bit over 2130mhz (for my card). Hence, it seems to my layman's eye that it's not using its available increased power budget to push higher stable frequency. Am I wrong? (e.g: if I could force feed it more juice, it might be stable at higher frequency?)
post edited by ParaWM - 2021/01/27 13:02:03
|
jimgrandbois
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2020/11/24 05:24:19
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/27 13:34:06
(permalink)
doug2507
The quality of those cards and the conditions in which they are run do not require more power than thay are already drawing.
I could accept this answer if I wasn’t sitting at 400w with power limit showing and clocks dropping sitting at 60c max core temp, I didn’t think that would be too warm? Regardless of that, I don’t really want to run the card full time over 400w, but I should be able to see it even briefly with my setup and I can’t, that’s what’s frustrating. Everything says I can hit 118% power target, but sits at 105% as if I never installed the higher power bios.
|
doug2507
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2008/06/15 10:13:16
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/28 03:14:27
(permalink)
jimgrandbois
doug2507
The quality of those cards and the conditions in which they are run do not require more power than thay are already drawing.
I could accept this answer if I wasn’t sitting at 400w with power limit showing and clocks dropping sitting at 60c max core temp, I didn’t think that would be too warm? Regardless of that, I don’t really want to run the card full time over 400w, but I should be able to see it even briefly with my setup and I can’t, that’s what’s frustrating. Everything says I can hit 118% power target, but sits at 105% as if I never installed the higher power bios.
Open GPU-Z, got to advanced, select nvidia bios. Does it show a 450w maximum? You need to understand that 450w bios doesn't mean the card will pull 450w, that's just what is available to the card. If the card isnt a great clocker then it wont need 450. I had a 3090 that was a poor clocker and it would clock any higher than needing 420w to hit its max. You could throw a 750w+ KP bios on the card and it still won't draw more power than it needs for clocks (and voltage) it can reach.
Silverstone TJ07B-W Tagan BZ-1300 EVGA 790i Ultra, P07, 15.23 QX9650@4.28ghz (450x9.5) 4GB OCZ Platinum EB DDR3-1600, 7-7-7-24-2t-2.0v@1800mhz 2x EVGA GTX 280 SLI(1xVanilla/1xSC). 182.08 (741/1566/2538) 4x500gb Sata-300 Barracuda Pioneer 215BK Asus D2X/XDT Vista Home Premium 64 Dell 2408WFP http://service.futuremark.com/compare?3dmv=852389 27,097
|
jimgrandbois
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2020/11/24 05:24:19
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/28 04:32:07
(permalink)
doug2507
jimgrandbois
doug2507
The quality of those cards and the conditions in which they are run do not require more power than thay are already drawing.
I could accept this answer if I wasn’t sitting at 400w with power limit showing and clocks dropping sitting at 60c max core temp, I didn’t think that would be too warm? Regardless of that, I don’t really want to run the card full time over 400w, but I should be able to see it even briefly with my setup and I can’t, that’s what’s frustrating. Everything says I can hit 118% power target, but sits at 105% as if I never installed the higher power bios.
Open GPU-Z, got to advanced, select nvidia bios. Does it show a 450w maximum?
You need to understand that 450w bios doesn't mean the card will pull 450w, that's just what is available to the card. If the card isnt a great clocker then it wont need 450. I had a 3090 that was a poor clocker and it would clock any higher than needing 420w to hit its max. You could throw a 750w+ KP bios on the card and it still won't draw more power than it needs for clocks (and voltage) it can reach.
Yes, GPU-Z shows 450w under Nvidia bios. I understand there are many factors that go into how much power the card will draw - but the only limiter I’m hitting in Timespy is power, it happens at 400w and clocks/voltage drop because of that tho I’m stable. There is no clear answer for me why it won’t go past 400w, which is what I’m trying to find.
|
Dabadger84
CLASSIFIED Member
- Total Posts : 3426
- Reward points : 0
- Joined: 2018/05/11 23:49:52
- Location: de_Overpass, USA
- Status: offline
- Ribbons : 10
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/28 05:03:50
(permalink)
wrong thread, sorry X_X
post edited by Dabadger84 - 2021/01/28 05:21:54
ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891 Specs:5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
|
alexsoxfan01
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2018/10/02 04:47:35
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/29 01:25:38
(permalink)
I too am unable to break the 400W wall despite using the 450W bios. Not quite sure what to do, the card just refuses to use above 400W and gives pwr as the perfcap reason. Bios definitely shows the 450W maximum in GPU-Z, and I've updated both the OC and normal. Neither can do it.
|
Jazekx
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2021/01/29 06:17:19
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/29 06:25:50
(permalink)
Same here, not able to reach 401W... anyways I got a bad binning because my memory wont go higher than +600Mhz stable and it is a 3080 FTW3 ULTRA... meanwhile my friends 3080 amp holo reaches +1650 on memory ;_;
|
xgiovio
New Member
- Total Posts : 36
- Reward points : 0
- Joined: 2014/05/15 15:31:10
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/29 08:07:43
(permalink)
|
samueloa84
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2020/12/20 20:03:06
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/29 08:21:16
(permalink)
Is unnacceptable, I bought the hybrid kit, I make an aggressive fan curve... Only +70 on the core, 0 at Vram... Only reach stable 2010mhz (at 65° omg I though that was cold!!!! ) ...never above 400wats, a completely dissapoint. :( last card from evga.
|
bmf79
Superclocked Member
- Total Posts : 153
- Reward points : 0
- Joined: 2007/12/11 16:43:35
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/29 16:13:52
(permalink)
doug2507
Don't normally post here but thought I'd share this....
3080 ftw3 on air with 5950x on water. All ambient, no chillers, rig inside the house. Looking forward to a water block arriving! Thank you EVGA!
I would love to know your settings in time spy and Nvidia control panel as I have the same card and cpu and am no where near 20k
|
Stankia
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2011/11/30 21:42:48
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/29 19:14:01
(permalink)
Could you please post a link to the 3080 FTW Hybrid Bios as well?
|
samueloa84
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2020/12/20 20:03:06
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/30 05:55:54
(permalink)
|
kraade
CLASSIFIED Member
- Total Posts : 2385
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: offline
- Ribbons : 7
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/30 10:29:17
(permalink)
bmf79
doug2507
Don't normally post here but thought I'd share this....
3080 ftw3 on air with 5950x on water. All ambient, no chillers, rig inside the house. Looking forward to a water block arriving! Thank you EVGA!
I would love to know your settings in time spy and Nvidia control panel as I have the same card and cpu and am no where near 20k
I guess that's the 5950x Nailing the CPU score On I9 9900K at 5ghz I think that's what's dropping my score , I can get an 18.4k but that is clocking the GPU +92 clk +1187 mem if GPu hits 2165 it crashes 2130 is my top before crash
|
kraade
CLASSIFIED Member
- Total Posts : 2385
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: offline
- Ribbons : 7
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/31 17:14:48
(permalink)
Pushed all the sliders up in Normal switch mode, It will definitely draw 450w, it wont improve your PR score but it can Pull 450w , no problem
|
avimeso
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2015/08/18 02:47:49
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/01/31 17:23:14
(permalink)
im abit stumped with this bios. my highest score i can get in 3dmark timespy is 18419 to work is 1115 memory and 115 core with the 3080 ultra ftw3 oc bios. i was trying to get a 19k score but doesnt seem possible with x1 software. any suggestions?
|
jamexr
iCX Member
- Total Posts : 266
- Reward points : 0
- Joined: 2016/07/21 16:30:16
- Location: SLC, Utah, USA
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/02/01 00:34:28
(permalink)
samueloa84
Is unnacceptable, I bought the hybrid kit, I make an aggressive fan curve... Only +70 on the core, 0 at Vram... Only reach stable 2010mhz (at 65° omg I though that was cold!!!! ) ...never above 400wats, a completely dissapoint. :( last card from evga.
That's GPU lottery bro, not evga's fault. You could buy another brand and still get a crappy chip. Same thing happens with CPUs.
|
doug2507
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2008/06/15 10:13:16
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3080 FTW3 (3897) XOC BIOS BETA
2021/02/01 02:24:57
(permalink)
bmf79
doug2507
Don't normally post here but thought I'd share this....
3080 ftw3 on air with 5950x on water. All ambient, no chillers, rig inside the house. Looking forward to a water block arriving! Thank you EVGA!
I would love to know your settings in time spy and Nvidia control panel as I have the same card and cpu and am no where near 20k
90% down to a really strong card, the rest a few tweaks. (ignoring cpu score). Hope to push 20.5k+ gpu when the block arrives. Could do with an EVbot for this one as a touch more vgpu would make it fly.
Silverstone TJ07B-W Tagan BZ-1300 EVGA 790i Ultra, P07, 15.23 QX9650@4.28ghz (450x9.5) 4GB OCZ Platinum EB DDR3-1600, 7-7-7-24-2t-2.0v@1800mhz 2x EVGA GTX 280 SLI(1xVanilla/1xSC). 182.08 (741/1566/2538) 4x500gb Sata-300 Barracuda Pioneer 215BK Asus D2X/XDT Vista Home Premium 64 Dell 2408WFP http://service.futuremark.com/compare?3dmv=852389 27,097
|