EVGA_Lee
Moderator
- Total Posts : 4243
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Hi everyone, a new Flow Control version is available that adds support for Zen 3 CPUs: EVGA Flow Control v2.0.11
- Fixes issue where certain newer AMD Zen 3 CPUs would not show temps.
Please let us know if you run into any issues.
|
HRPuffnstuff
FTW Member
- Total Posts : 1324
- Reward points : 0
- Joined: 2007/11/30 11:58:01
- Status: offline
- Ribbons : 4
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2021/03/06 03:20:01
(permalink)
Thanks for the information. 
MSI MEG Z790 ACE, Intel i9 13900k, G.Skill Trident Z5 RGB 32gb 6600, ARCTIC Liquid Freezer III 420 ARGB in push/pull, Gigabyte RTX 4090 Gaming OC, EVGA Nu Audio, Samsung 990 & 980 Pro's, WD SN850X & Black hdd, FSP Hydro PTH Pro 1350W PS, Windows 11 Professional, Thermaltake Level 20 XT w/Antec Prizm X 120mm argb fans
|
wrongonred
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2018/12/16 00:30:57
- Status: offline
- Ribbons : 0
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2021/03/10 19:30:08
(permalink)
Having problems with LED Sync.
|
Slayer6x
Superclocked Member
- Total Posts : 154
- Reward points : 0
- Joined: 2021/05/20 16:13:04
- Status: offline
- Ribbons : 0
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2021/06/17 16:34:48
(permalink)
thank you for this. i was starting to get frustrated with my 5900x..
|
zb50c
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2018/02/20 10:15:34
- Status: offline
- Ribbons : 0
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2021/07/26 16:28:15
(permalink)
EVGA Flow Control will not work. Device Not Found is the message I get. Have installed & uninstalled, and re-installed, but will not work. mobo Asus Tuf gaming X570 Plus (wi-fi) processor AMD 3900X.
|
Jadaar
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2007/07/18 14:18:23
- Status: offline
- Ribbons : 0
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2021/09/18 12:04:07
(permalink)
No problems with 2.0.11 on an Intel setup but, when I installed the 2.0.12 version over the previous, the CLC was flagged as removable media. It runs fine and the app/device can't be removed. It's just weird having the systray app popup.
post edited by Jadaar - 2021/09/19 11:33:28
|
Mister E...
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2005/05/12 18:10:06
- Status: offline
- Ribbons : 3
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2021/09/18 17:28:23
(permalink)
Jadaar
No problems with 2.0.11 on an Intel setup but, when I installed the 2.0.12 version over the previous, the CLC was flagged as removable media. It runs fine and the app can't be removed. It's just weird having the systray app popup.
Thanks for this - didn't realize there was a newer version 2.0.12 until I read your post. It's not listed in the forum and the EVGA software page still lists v.2.0.11. Will install this shortly. Update: Same issue - device comes up as removable and is now identified as a Asetek USB Device. The driver version is 6.7.2.0 from 2015 (IIRC - I reverted back to v.2.0.11). From what I've searched so far, you can't disable the "Safe Removal Required" flag for the device as it's a WinUSB based driver. With v.2.0.11, it's identified as CCVI (ChillControl VI) with a driver v.0.1.0.0 from 2012-06-25.
post edited by Mister E... - 2021/09/18 18:59:07
|
rgarvey58
New Member
- Total Posts : 97
- Reward points : 0
- Joined: 2021/03/11 06:35:53
- Status: offline
- Ribbons : 2
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2021/09/21 12:21:39
(permalink)
Is there a reason that 2.0.12 is not listed on the SW downloads page? I found it on the 'Drivers & Bios' page when you choose Closed Loop Coolers. Seeing it was a newer version by ~5 months, I have it installed. I never noticed the CLC was listed as a removable device until I read this forum thread, but sure enough it shows as a "Eject 690LC" on the menu and it cannot be ejected due to being in use (probably a very good thing).
Should 2.0.12 not be used? I am questioning my temps (fluid reports reaching 45c during gaming) but I have no indication it is not correct or related to 2.0.12.
|
AknBean
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2021/10/26 15:11:55
- Status: offline
- Ribbons : 0
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2021/11/09 22:39:33
(permalink)
On my mind since having the CLC 240 installed in my new build. Why is a 64-bit edition of Flow Control being installed into 32-bit “C:\Program Files (x86).”? The download states 64-bit. I know that Windows, the WOW64 emulation layer redirects its file access from “C:\Program Files” to “C:\Program Files (x86).” The 32-bit program tries to access the Program Files directory and is pointed to the Program Files (x86) folder. 64-bit programs still use the normal Program Files folder.
I just don't get a product with such bum control software program and has not been refined in how many years?
CPU-Intel 11th Gen Core i9-11900 MoBo-ASUSTeK COMPUTER INC. PRIME H570M-PLUS GPU-Gigabyte GeForce RTX 3060 Vision OC 12GB Memory-G.Skill Trident Z NEO Series 64GB (2 x 32GB) DRAM DDR4 3200 16GB Kit (2 x 8GB) HyperX FURY DDR4 3200MHz EVGA CLC 240mm All-In-One RGB LED CPU Cooler OS-Microsoft Windows 11 Professional 64-bit PSU-EVGA 750 GA, 80 PLUS Gold 750W Monitor- ViewSonic's Elite XG270QG 165hz Mouse-Logitech MX Master 3, Razer BASILISK Keyboard: Alienware 510K Low Profile RGB Mechanical Gaming Keyboard - Lunar Light Case-Fractal Design Focus G Mini SSD-Boot: Corsair Force MP600, Gen 4 1TB, XPG SPECTRIX S40G 4TB RGB, Gen 3, and SATA SSD Crucial 1TB MX500 & 4TB 3D NAND SATA 2.5" SSD Samsung 870 QVO SATA III 2.5" SSD 2TB SSD
|
sutt359
Superclocked Member
- Total Posts : 144
- Reward points : 0
- Joined: 2008/08/13 04:15:12
- Status: offline
- Ribbons : 0
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2021/11/11 12:57:00
(permalink)
Is this software ever going to get a UI update, as it's not aged well next to new evga software
EVGA X299 FTW, Intel i9 10920x, 32gb Corsair Vantage Pro RGB, RTX 3080 IT FE, Corsair 5000x, Corsair H150i Elite, Nvme 1tb, 1TB SSD, EVGA 1000w G5, Creative SBX AE-5.
|
AknBean
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2021/10/26 15:11:55
- Status: offline
- Ribbons : 0
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2022/01/03 17:43:17
(permalink)
Well, here it is now 2022, and nothing has changed with this software to my knowledge. NZXT CAM works just fine for me with my CLC 240. What more can I say. It shows up as a Kraken fan & pump, and all is controlled nicely, including the RGB. Wonderfully cooled with quiet fans is a bonus compared to what I have read from other posts. EVGA, I didn't wish to throw NZXT CAM in your face, yet what is suitable with their software that can correctly give control of this EVGA AIO?
CPU-Intel 11th Gen Core i9-11900 MoBo-ASUSTeK COMPUTER INC. PRIME H570M-PLUS GPU-Gigabyte GeForce RTX 3060 Vision OC 12GB Memory-G.Skill Trident Z NEO Series 64GB (2 x 32GB) DRAM DDR4 3200 16GB Kit (2 x 8GB) HyperX FURY DDR4 3200MHz EVGA CLC 240mm All-In-One RGB LED CPU Cooler OS-Microsoft Windows 11 Professional 64-bit PSU-EVGA 750 GA, 80 PLUS Gold 750W Monitor- ViewSonic's Elite XG270QG 165hz Mouse-Logitech MX Master 3, Razer BASILISK Keyboard: Alienware 510K Low Profile RGB Mechanical Gaming Keyboard - Lunar Light Case-Fractal Design Focus G Mini SSD-Boot: Corsair Force MP600, Gen 4 1TB, XPG SPECTRIX S40G 4TB RGB, Gen 3, and SATA SSD Crucial 1TB MX500 & 4TB 3D NAND SATA 2.5" SSD Samsung 870 QVO SATA III 2.5" SSD 2TB SSD
|
wrongonred
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2018/12/16 00:30:57
- Status: offline
- Ribbons : 0
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2022/01/04 17:22:37
(permalink)
EVGA just doesn't care to support their products.
|
mobiusx02
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2015/04/11 13:01:15
- Status: offline
- Ribbons : 0
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2022/02/15 21:17:52
(permalink)
There is a compatibility issue between Precision X1 and EVGA Flow Control. I get a "Load PX1 Error!" dialog if I start Precision X1 when EVGA Flow Control v.2.1.0 is running. After dismissing the dialog and waiting for about 20 seconds, Precision X1 window would appear.
I can reproduce it every time. I'm on PX1 version 1.3.0.0 and EVGA Flow Control v.2.1.0. Could someone look into the problem? Thanks.
|
AknBean
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2021/10/26 15:11:55
- Status: offline
- Ribbons : 0
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2022/02/17 17:34:17
(permalink)
Newest version 2.1.0 
CPU-Intel 11th Gen Core i9-11900 MoBo-ASUSTeK COMPUTER INC. PRIME H570M-PLUS GPU-Gigabyte GeForce RTX 3060 Vision OC 12GB Memory-G.Skill Trident Z NEO Series 64GB (2 x 32GB) DRAM DDR4 3200 16GB Kit (2 x 8GB) HyperX FURY DDR4 3200MHz EVGA CLC 240mm All-In-One RGB LED CPU Cooler OS-Microsoft Windows 11 Professional 64-bit PSU-EVGA 750 GA, 80 PLUS Gold 750W Monitor- ViewSonic's Elite XG270QG 165hz Mouse-Logitech MX Master 3, Razer BASILISK Keyboard: Alienware 510K Low Profile RGB Mechanical Gaming Keyboard - Lunar Light Case-Fractal Design Focus G Mini SSD-Boot: Corsair Force MP600, Gen 4 1TB, XPG SPECTRIX S40G 4TB RGB, Gen 3, and SATA SSD Crucial 1TB MX500 & 4TB 3D NAND SATA 2.5" SSD Samsung 870 QVO SATA III 2.5" SSD 2TB SSD
|
frankd3
SSC Member
- Total Posts : 512
- Reward points : 0
- Joined: 2011/05/20 06:20:30
- Location: Florida
- Status: offline
- Ribbons : 14
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2022/02/24 16:22:55
(permalink)
Before I try the new version 2.1.0 I'd like to know why the check for updates doesn't tell me it exists.
EVGA Z590 FTW, i9-11900K, EK-AIO Elite 360 D-RGB, GSkill F4-3600C14D-32GTRSA, EVGA RTX 3090 Ti FTW3 Ultra, EVGA SuperNOVA 1600 T2, Corsair 5000D Airflow, BenQ EX2780Q 2560x1440, Windows 10 Pro
|
AknBean
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2021/10/26 15:11:55
- Status: offline
- Ribbons : 0
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2022/02/25 06:10:37
(permalink)
 If the software is so buggy, why would you think the update feature would be working correctly?
post edited by AknBean - 2022/02/25 06:14:29
CPU-Intel 11th Gen Core i9-11900 MoBo-ASUSTeK COMPUTER INC. PRIME H570M-PLUS GPU-Gigabyte GeForce RTX 3060 Vision OC 12GB Memory-G.Skill Trident Z NEO Series 64GB (2 x 32GB) DRAM DDR4 3200 16GB Kit (2 x 8GB) HyperX FURY DDR4 3200MHz EVGA CLC 240mm All-In-One RGB LED CPU Cooler OS-Microsoft Windows 11 Professional 64-bit PSU-EVGA 750 GA, 80 PLUS Gold 750W Monitor- ViewSonic's Elite XG270QG 165hz Mouse-Logitech MX Master 3, Razer BASILISK Keyboard: Alienware 510K Low Profile RGB Mechanical Gaming Keyboard - Lunar Light Case-Fractal Design Focus G Mini SSD-Boot: Corsair Force MP600, Gen 4 1TB, XPG SPECTRIX S40G 4TB RGB, Gen 3, and SATA SSD Crucial 1TB MX500 & 4TB 3D NAND SATA 2.5" SSD Samsung 870 QVO SATA III 2.5" SSD 2TB SSD
|
frankd3
SSC Member
- Total Posts : 512
- Reward points : 0
- Joined: 2011/05/20 06:20:30
- Location: Florida
- Status: offline
- Ribbons : 14
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2022/02/25 06:30:55
(permalink)
AknBean
If the software is so buggy, why would you think the update feature would be working correctly?
I guess that was a stupid question I didn't realize it was THAT buggy. I have the pump plugged in to the pump header set on max. I recently connected the fans to a cpu fan header and I'm happy with the performance. Water temp is lower this way and the increases are slower. So I don't need this software anymore. EDIT: plus it gets disabled by the latest Precision X1 install when the winring0 service gets deleted.
post edited by frankd3 - 2022/02/25 06:38:59
EVGA Z590 FTW, i9-11900K, EK-AIO Elite 360 D-RGB, GSkill F4-3600C14D-32GTRSA, EVGA RTX 3090 Ti FTW3 Ultra, EVGA SuperNOVA 1600 T2, Corsair 5000D Airflow, BenQ EX2780Q 2560x1440, Windows 10 Pro
|
AknBean
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2021/10/26 15:11:55
- Status: offline
- Ribbons : 0
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2022/02/25 08:21:08
(permalink)
Indeed, . It is that buggy.
Like so many others, I have never really gotten it to work. I like the cooler, and it is performing well. Liquid and CPU temperatures are low, and I've managed to control the fan speeds reasonably quiet. Like you, I also don't need software, yet I am occasionally checking potential updates just for the chuckle sakes, I guess.
CPU-Intel 11th Gen Core i9-11900 MoBo-ASUSTeK COMPUTER INC. PRIME H570M-PLUS GPU-Gigabyte GeForce RTX 3060 Vision OC 12GB Memory-G.Skill Trident Z NEO Series 64GB (2 x 32GB) DRAM DDR4 3200 16GB Kit (2 x 8GB) HyperX FURY DDR4 3200MHz EVGA CLC 240mm All-In-One RGB LED CPU Cooler OS-Microsoft Windows 11 Professional 64-bit PSU-EVGA 750 GA, 80 PLUS Gold 750W Monitor- ViewSonic's Elite XG270QG 165hz Mouse-Logitech MX Master 3, Razer BASILISK Keyboard: Alienware 510K Low Profile RGB Mechanical Gaming Keyboard - Lunar Light Case-Fractal Design Focus G Mini SSD-Boot: Corsair Force MP600, Gen 4 1TB, XPG SPECTRIX S40G 4TB RGB, Gen 3, and SATA SSD Crucial 1TB MX500 & 4TB 3D NAND SATA 2.5" SSD Samsung 870 QVO SATA III 2.5" SSD 2TB SSD
|
HRPuffnstuff
FTW Member
- Total Posts : 1324
- Reward points : 0
- Joined: 2007/11/30 11:58:01
- Status: offline
- Ribbons : 4
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2022/12/27 14:52:36
(permalink)
Recently it stopped working for me while I was still on the AMD hardware and a clean install of W11 pro. Swapped in new intel hardware and did a clean install of windows and its doing the same thing. Edit: I started messing with the settings and started selecting each of the different ones and let it sit on them for a few seconds and then I went back to the temperate and it seems to be working ATM.
post edited by HRPuffnstuff - 2022/12/27 15:07:27
MSI MEG Z790 ACE, Intel i9 13900k, G.Skill Trident Z5 RGB 32gb 6600, ARCTIC Liquid Freezer III 420 ARGB in push/pull, Gigabyte RTX 4090 Gaming OC, EVGA Nu Audio, Samsung 990 & 980 Pro's, WD SN850X & Black hdd, FSP Hydro PTH Pro 1350W PS, Windows 11 Professional, Thermaltake Level 20 XT w/Antec Prizm X 120mm argb fans
|
AknBean
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2021/10/26 15:11:55
- Status: offline
- Ribbons : 0
Re: EVGA Flow Control v2.0.11 - Now Supports More AMD Zen 3 processors
2022/12/27 18:33:26
(permalink)
Still worthless software control.
CPU-Intel 11th Gen Core i9-11900 MoBo-ASUSTeK COMPUTER INC. PRIME H570M-PLUS GPU-Gigabyte GeForce RTX 3060 Vision OC 12GB Memory-G.Skill Trident Z NEO Series 64GB (2 x 32GB) DRAM DDR4 3200 16GB Kit (2 x 8GB) HyperX FURY DDR4 3200MHz EVGA CLC 240mm All-In-One RGB LED CPU Cooler OS-Microsoft Windows 11 Professional 64-bit PSU-EVGA 750 GA, 80 PLUS Gold 750W Monitor- ViewSonic's Elite XG270QG 165hz Mouse-Logitech MX Master 3, Razer BASILISK Keyboard: Alienware 510K Low Profile RGB Mechanical Gaming Keyboard - Lunar Light Case-Fractal Design Focus G Mini SSD-Boot: Corsair Force MP600, Gen 4 1TB, XPG SPECTRIX S40G 4TB RGB, Gen 3, and SATA SSD Crucial 1TB MX500 & 4TB 3D NAND SATA 2.5" SSD Samsung 870 QVO SATA III 2.5" SSD 2TB SSD
|