EVGA

Dual E5-2697v2 on EVGA SR-X No Boot code BC STOP

Author
Post
Essentials Only Full Version
hhket1988
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2016/09/03 05:43:48
  • Status: offline
  • Ribbons : 0
2017/07/21 05:12:00 (permalink)
I am in trouble with SR-X and dual xeon E5-2697v2.
When starting with a dual CPU, it stops with code BC.
A single CPU of 2697v2 will boot without any problems.
Also, xeon e5-2690 dual CPU started without problem.
Memory uses non ECC.
 
It seems that the code bc was a problem at the early stage with non ECC and ivy-EP combination. After that, it is solved by upgrading the BIOS.
Currently, the BIOS uses the latest ver 1.03.
 
Does anyone else have similar problems?
Did you have a solution?
 
#1

2 Replies Related Threads
    Cgnema
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 2012/11/03 14:55:21
    • Status: offline
    • Ribbons : 0
    Re: Dual E5-2697v2 on EVGA SR-X No Boot code BC STOP 2018/12/20 03:11:22 (permalink)
    Me too. No idea what to do about it. Each one works alone, just not together.
    #2
    Cgnema
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 2012/11/03 14:55:21
    • Status: offline
    • Ribbons : 0
    Re: Dual E5-2697v2 on EVGA SR-X No Boot code BC STOP 2018/12/24 00:20:43 (permalink)
    Ok got it to work. Seems that ecc ram might be required for running 2 e5-2697v2 in this board. I tested it with 2 types of ECC ram that a friend let me borrow. I don’t have any other non ECC ram to test it with. But the ram I was using before worked just fine with my dual E5-2650. And even with one of the E52697v2.

    Anyway if you have this problem try ECC ram.
    #3
    Jump to:
  • Back to Mobile