hau.tang88
is it possible to install radiator on the left side of the case ? 

the one behind the I/O shield is masked with a screen I wouldn't recommend it . there is plenty of area in the top and right for a radiator

hau.tang88
is it possible to install radiator on the left side of the case ? 

you mean inside of the left-side door thingy?  There are already two fans back there, so yeah you could definitely put in a small or medium sized radiator if you wanted to.  The top would probably be a better place though!

https://photos.google.com/share/AF1QipPJRXTtkQBNnV7YFEr4VNu_9916jEK7_4DPXQBNMc5mbQASJ2eNNKxSsFVYCtbY4w/photo/AF1QipN4r8bgLLHgUjvrUPNw_JL_FRpfi2Mzys7kxBap?key=Nmt2Q21CdklEdmUyX05Nb3ZmNW9SUzBlSzJLOXVn
 
The 52 degrees is top of 1080FTW backplate

Mine came out pretty good
 
http://www.modsrigs.com/detail.aspx?BuildID=35841
 
 

Ok, so here are a few of mine.

 

 

you can get puush, its free and what i use.

I can not wait to see a full custom loop in this case! It gets me excited for my custom loop I have planed in a couple weeks.

B1gf00t
I was hoping to get pictures of my hard tube setup yesterday after finishing a 24hr leak test, but instead my mobo failed to post.

Ouch! My motherboard had an error code A2 when I was done but I just hit reset and it started just fine. I feel like my custom loop isn't going to impress because I used black rubber tubing and don't have anything special. I think it looks cool. Very industrial.

Chris21010

B1gf00t
I was hoping to get pictures of my hard tube setup yesterday after finishing a 24hr leak test, but instead my mobo failed to post.

DOH! i do hope you tested your hardware before you put in all the hard tubing. if not you'll never know if it was doa or something you did wrong.

All the hardware I have been using for the last month or two in my old case, so it was definitely something in the move.
 
I spent a few hours last night tracking the problem down the the mobo.  Fortunately EVGA has 24hr tech support because I ended up calling around 11pm.  Turns out the primary bios chip died, and not even 20min after making the call I had a new one scheduled to be shipped.  EVGA tech support never ceases to amaze me.
 
From there I couldn't get the backup bios chip to boot to windows so I just put it down the for the night.  That problem just turned out to be user error and was fixed when I took more time to crawl around in the bios.
 
My system is now up and running so I hope to have pics up tonight.

nealb90

Got this done a few days ago. 
 
don't know how to add pics here. should be able to right click and copy image address or open image in new tab to view though. 

You're right, we can't insert images.  What do we need to do to get this privilege?  I don't see anything to indicate when in the TOS or ultimate starter-thread.

Well, lets see if this works.
 

the plexi that closes the lower part actually works great. would love to see more pics 

got it to work, thanks!

CPU:  Intel i7 5930K @ 4.5 GHz 
MB:   EVGA X99 Classified
GPU:  2x EVGA GTX Titans
MEM: 16GB Corsair Dominator Platinum DDR4 2800
PSU:  Corsair AX1200i
CASE: EVGA DG-87
COOLING: Custom Loop with a ETK 240mm rad, a 360mm rad, T-Virus res, and a Heatkiller 3.0 CPU block

Chris21010
I can not wait to see a full custom loop in this case! It gets me excited for my custom loop I have planed in a couple weeks.

Hoping I will have the last of my parts by the end of this week and will be building this weekend  **fingers crossed**

ManBearPig

Damn is really good case. Even for single card.
H110i GT and EVGA Hybrid could full space more, it's not empty at all.
 
I have exactly one little table near computer desk, height is little less than 1m and almost 1.5 long.
Exactly for DG-87. My Obsidian 650D stay on side in same position.