XRogerX
Superclocked Member
- Total Posts : 220
- Reward points : 0
- Joined: 2011/08/01 15:58:03
- Status: offline
- Ribbons : 2
Re: DG-8 Picture Thread!
2017/03/05 19:15:50
(permalink)
escannihilator
sent you a message about lights and yes there is lots of room behind the mb side.....
Well i took your advice on the LED's and i ordered the case lol got a FREE 600W PSU with a case , so now i got a spare lol 
MB: EVGA Z170 Classified K CPU: I7 6700K VGA:EVGA GTX 1070SC Memory: G.SKILL TridentZ 16GB PSU: CORSAIR RM1000 HD: Kingston SSDNow V300 Cooling: Swiftech 240 x2 prestige
|
XRogerX
Superclocked Member
- Total Posts : 220
- Reward points : 0
- Joined: 2011/08/01 15:58:03
- Status: offline
- Ribbons : 2
Re: DG-8 Picture Thread!
2017/03/08 20:21:05
(permalink)
☄ Helpfulby kdurrell 2017/05/11 23:01:47
Let me know what you all think Well I did get my case the next day witch would of been the 6th but ran into some issues caused by me lol here are some pictures I didn't get no pictures when I took it our of the box cause I misplace the cam lol but here are a few  here is a few pictures of the Other case that I replaced with this ,It was a good move   the Left Side  I/O  Right Side  Wife did the wire management , think she did good for the 1st time  Temp inside the case  and finally the Front 
MB: EVGA Z170 Classified K CPU: I7 6700K VGA:EVGA GTX 1070SC Memory: G.SKILL TridentZ 16GB PSU: CORSAIR RM1000 HD: Kingston SSDNow V300 Cooling: Swiftech 240 x2 prestige
|
Slimshiesty
CLASSIFIED Member
- Total Posts : 2255
- Reward points : 0
- Joined: 2007/12/08 11:29:43
- Location: Colorado Springs, Co.
- Status: offline
- Ribbons : 5
Re: DG-8 Picture Thread!
2017/03/09 06:32:32
(permalink)
XRogerX
Thinking about getting the DG-86 to Replace my Phanteks Pro ,but will be looking for some nice Red LEDs , anyone know where to get some
anyways how much room is there in back of the mobo tray ,cause with the Phanteks pro there is about i think 1inch back there ,so if it has about that much with the DG-86 then I'm sold
Thanks Roger
For leds i purchased this... https://www.newegg.com/Product/Product.aspx?Item=N82E16811980001good price, colors are good and bright. they are magnetic. comes with 2 strips, but found one was bright enough. Installed the strip in place of the original. Worked well. Good Luck !
CPU Intel i7 6700K @ 4.0 GHz MB MSI Z170A Gaming 7 GPU EVGA GTX 1070ti FTW2 MEM Corsair Vengeance RGB DDR4 3000 2X8GB PSU EVGA Supernova 850 G2 CASE Thermaltake View 31 TG 
|
acemaninwa
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2009/03/11 04:38:46
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/04/08 14:17:06
(permalink)
Here's mine. I must admit. I like the case a lot. The only thing I didn't like was removing the top. One of the plastic pieces that hold it to the case was broken when it arrived. When I took it out of the box it shipped I heard something rattling around inside. One of the plastic pieces had been broken. Kind of a bummer my new case was broken before I ever got to use it. :(.
post edited by acemaninwa - 2017/04/08 14:23:26
|
Stardust_One
SSC Member
- Total Posts : 689
- Reward points : 0
- Joined: 2012/12/02 06:25:05
- Location: Solar System / Milky Way
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/04/10 13:07:14
(permalink)
--DG-87, it looks like a heater!!! (What do I know... I'm just a designer ^^) Depends... enjoy your new case! ^^
post edited by Carbonshape - 2017/04/19 14:40:24
|
mack1080
New Member
- Total Posts : 40
- Reward points : 0
- Joined: 2017/03/30 06:12:10
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/04/11 08:47:00
(permalink)
|
Gam3r26
Superclocked Member
- Total Posts : 111
- Reward points : 0
- Joined: 2012/09/03 10:53:06
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/04/28 17:05:24
(permalink)
Hello all I am new to the EVGA Case thing can you all let me know what its like as far as airflow, ease of building in them and cable management? Thanks.
|
Stardust_One
SSC Member
- Total Posts : 689
- Reward points : 0
- Joined: 2012/12/02 06:25:05
- Location: Solar System / Milky Way
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/04/28 18:05:13
(permalink)
Gam3r26
Hello all I am new to the EVGA Case thing can you all let me know what its like as far as airflow, ease of building in them and cable management? Thanks.
That's a professional review of it: https://www.youtube.com/watch?v=ytysz4sf3EY
|
jeffro66
CLASSIFIED Member
- Total Posts : 3628
- Reward points : 0
- Joined: 2007/01/19 13:23:32
- Location: nc
- Status: offline
- Ribbons : 8
Re: DG-8 Picture Thread!
2017/04/29 09:15:27
(permalink)
I finally got around to transferring my pc to new DG-87 was impressed at all the different ways I could of went about it sorry pics are not much good time for new camera     pics don't do it justice s6 would probably take better pics gonna for new camera had a heck of time getting new res stop leaking finally got it lights are very bright but not to bad will update modrig to. notice my rad has some bent fins it's fairly new not sure how that happen it's a 360 thick that almost caused major problem was able to offset the res to make up for it so probably wont to go with thinner rad for this case it's built very well they thought of almost everything 
post edited by jeffro66 - 2017/04/29 12:25:13
|
johnalan
iCX Member
- Total Posts : 272
- Reward points : 0
- Joined: 2011/02/25 18:55:23
- Location: Mississippi
- Status: offline
- Ribbons : 4
|
siatel
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2017/03/23 07:29:36
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/05/01 12:02:53
(permalink)
My EVGA DG-87   " />   " /> " />   " />
post edited by siatel - 2017/05/12 00:05:12
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10126
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: DG-8 Picture Thread!
2017/05/02 01:13:14
(permalink)
Look great, that's Sony 4K TV? Can you tell me model please. Some new TV arrive with Gaming Mode option, I'm curious how that work. Than I could save money and upgrade and TV and monitor in same time.
post edited by Vlada011 - 2017/05/02 01:14:36
|
AgroKK
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2016/12/02 15:34:54
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/05/04 10:02:03
(permalink)
Slimshiesty
Ok, so here are a few of mine.
Looking at this made me realise I had a music cab I've been using as a home for a dead PC and dead printer for the last 5 years sat right next to my desk. My PC may not be a pretty as yours, but it would look a lot better sat on that cab than on the floor. Thanks for the inspiration!
|
siatel
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2017/03/23 07:29:36
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/05/05 11:14:50
(permalink)
Vlada011
Look great, that's Sony 4K TV?
Can you tell me model please.
Some new TV arrive with Gaming Mode option, I'm curious how that work.
Than I could save money and upgrade and TV and monitor in same time.
hi, yes that is Sony 43X8000D great for gaming and have "football mode" for gaming .
post edited by siatel - 2017/05/05 11:19:02
|
jlwoods65
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2014/05/21 20:53:47
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/05/05 21:31:25
(permalink)
I am looking for a new case an seeing these pics really might have sold me on the DG8. Just need to know about the water cooling options. If anyone has a water cooling setup besides an AIO please post pictures.
|
Hoggle
EVGA Forum Moderator
- Total Posts : 8891
- Reward points : 0
- Joined: 2003/10/13 22:10:45
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: DG-8 Picture Thread!
2017/05/11 23:01:24
(permalink)
|
MackTheKnight
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2011/01/29 09:32:06
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/05/15 17:56:58
(permalink)
My build finally completed in the DG-86. Brought over from a TT Level 10 GT. Wanted room for bigger rads, and gotta say I'm very happy with the move. Next time I drain the loop, I'll upgrade the res to a larger tube and hopefully add some lighting to the res as well.    -Mack
EVGA DG86 Case//Asus P9X79 Pro//i7 3930K @ 4.4 Ghz//EK Custom Water Loop//32 GB RAM//2 X Samsung Evo 500 GB SATA in RAID 0 (900 MBPS R/700 MBPS W) //EVGA GTX 1080Ti under EKWB
|
MackTheKnight
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2011/01/29 09:32:06
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/05/16 09:16:38
(permalink)
jlwoods65
I am looking for a new case an seeing these pics really might have sold me on the DG8. Just need to know about the water cooling options. If anyone has a water cooling setup besides an AIO please post pictures.
It is great for a custom loop, in my opinion. I have 2 360 rads in mine, but it can go up to 2 420 rads. One rad in the right side and one in the top.
post edited by MackTheKnight - 2017/05/16 12:22:12
EVGA DG86 Case//Asus P9X79 Pro//i7 3930K @ 4.4 Ghz//EK Custom Water Loop//32 GB RAM//2 X Samsung Evo 500 GB SATA in RAID 0 (900 MBPS R/700 MBPS W) //EVGA GTX 1080Ti under EKWB
|
Syzich
Superclocked Member
- Total Posts : 188
- Reward points : 0
- Joined: 2017/06/17 22:50:14
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/06/17 23:54:16
(permalink)
Pretty nice setup. I see you're a Logitech G13 user, too. ( ' ')b Edit: This was supposed to be a quote/reply to post #160. Apparently I misclicked. ¯\_(ツ)_/¯
post edited by Syzich - 2017/06/17 23:59:48
|
johnalan
iCX Member
- Total Posts : 272
- Reward points : 0
- Joined: 2011/02/25 18:55:23
- Location: Mississippi
- Status: offline
- Ribbons : 4
Re: DG-8 Picture Thread!
2017/06/18 00:31:13
(permalink)
Syzich
Pretty nice setup. I see you're a Logitech G13 user, too. ( ' ')b
Edit: This was supposed to be a quote/reply to post #160. Apparently I misclicked. ¯\_(ツ)_/¯
Been using the G13 so long I can't play any games with the G19 keyboard.
|
SleepyFilipy
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2017/04/30 05:14:08
- Status: offline
- Ribbons : 0
|
gobstoppable
Superclocked Member
- Total Posts : 227
- Reward points : 0
- Joined: 2017/06/28 18:00:24
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/07/04 19:25:09
(permalink)
man those dg-87's are looking real nice. wish i had seen these before i went with caselabs 
|
siatel
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2017/03/23 07:29:36
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/07/05 04:13:44
(permalink)
gobstoppable
man those dg-87's are looking real nice. wish i had seen these before i went with caselabs
hi,, Can you send a photo of your caselabs... tanx..
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84723
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86
Re: DG-8 Picture Thread!
2017/07/05 04:23:14
(permalink)
For those of you who have photobucket linked pictures photobucket now wants 300 dollars a year so my suggestion is that you use another photo provider.
|
Goobers
Superclocked Member
- Total Posts : 147
- Reward points : 0
- Joined: 2010/08/25 23:04:40
- Status: offline
- Ribbons : 2
Re: DG-8 Picture Thread!
2017/07/08 04:12:13
(permalink)
 Not cool man!!! ~~~~~ But it seemed okay, so I continued on...      Later on, I actually turned the rad for the Hybrid, so it was mounted similar to the CPU rad and didn't have the tubes "in your face." But I forgot to snap pics then (plus my phone was on the charger since the battery was low).  And I "cleaned up" the area below the motherboard as best I can. 
post edited by Goobers - 2017/07/08 13:48:03
|
fragility_V1
SSC Member
- Total Posts : 940
- Reward points : 0
- Joined: 2015/07/16 10:02:01
- Location: Southern California
- Status: offline
- Ribbons : 4
Re: DG-8 Picture Thread!
2017/08/03 13:59:42
(permalink)
jeffro66
I finally got around to transferring my pc to new DG-87 was impressed at all the different ways I could of went about it sorry pics are not much good time for new camera
pics don't do it justice s6 would probably take better pics gonna for new camera had a heck of time getting new res stop leaking finally got it lights are very bright but not to bad will update modrig to.
notice my rad has some bent fins it's fairly new not sure how that happen it's a 360 thick that almost caused major problem was able to offset the res to make up for it so probably wont to go with thinner rad for this case it's built very well they thought of almost everything
What LED strips are you using in the case?
post edited by fragility_V1 - 2017/08/03 14:01:07
|
Jakzos
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2017/08/20 01:00:33
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/08/20 01:03:46
(permalink)
Hello guys , i just brought EVGA DG -87 Case lovly indeed .I'm will be setting up new rig around it , i need some advice.. an good PSU it would be great if 850W so i can fit it nicely inside it tru the enter couse my old psu berly fit in.
|
TheNerd
SSC Member
- Total Posts : 689
- Reward points : 0
- Joined: 2011/01/19 23:42:42
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/09/10 09:06:31
(permalink)
  Got that desk for 100 off face book good deal 
post edited by TheNerd - 2017/09/10 09:07:32
AMD Ryzen 7 3800X, G.SKILL Trident Z 3600Mhz 32GB ,Crossair MP600 1TB, EVGA GeForce GTX 1070 FTW, ASUS ROG STRIX X570, EVGA DG-86 Case, EVGA CLC 280, Supernova 750 G5, Win 10 x64 Affiliate Code: RZM-VU6-0TKA
|
Digital_Fuzion
SSC Member
- Total Posts : 630
- Reward points : 0
- Joined: 2015/05/13 16:30:58
- Status: offline
- Ribbons : 1
Re: DG-8 Picture Thread!
2017/10/14 19:09:20
(permalink)
Anyone doing RGB Fan lighting inside their cases? The case stock fans and internal controller only have 3-pin fan header support. 
post edited by Digital_Fuzion - 2017/10/14 19:11:34
|
fkjchon
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2015/07/29 23:08:33
- Status: offline
- Ribbons : 0
Re: DG-8 Picture Thread!
2017/12/18 01:37:57
(permalink)
 Got my EVGA DG87 setup with Core i9 and 1080Ti SLI. Apparently having 2x 420mm radiators aren't enough to get heat out fast enough. Is it possible to add a 3rd radiator anywhere? I don't seem to have enough space to do push/pull on the radiators either. Otherwise I'm gonna have to jump ship to Thermaltake View 71 with the 3x 420mm radiator support.
|