kristopher004
New Member
- Total Posts : 48
- Reward points : 0
- Joined: 2013/04/16 19:19:46
- Status: offline
- Ribbons : 1
Installed windows 10, device manager shows a couple base system devices with no drivers. I've installed all the drivers from evga. Anyone know what these are/which driver they need? Hardware id is: PCI\VEN_8086&DEV_0E19&SUBSYS_00008086&REV_04 
Attached Image(s)
|
bob16314
CLASSIFIED ULTRA Member
- Total Posts : 7859
- Reward points : 0
- Joined: 2008/11/07 22:33:22
- Location: Planet of the Babes
- Status: offline
- Ribbons : 761
Re: Base System Device no driver
2015/12/20 01:27:56
(permalink)
Vendor (VEN) ID 8086 is Intel Corporation for sure..No luck here finding the Device (DEV) 0E19 yet..Try running the Intel Driver Update Utility and see if it coughs up anything.
* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * "Whatever it takes, as long as it works" - Me
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 83969
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 85
Re: Base System Device no driver
2015/12/20 03:01:04
(permalink)
Normally this indication means the chipset drivers are not installed properly. Which X79 motherboard do you have?
|
kristopher004
New Member
- Total Posts : 48
- Reward points : 0
- Joined: 2013/04/16 19:19:46
- Status: offline
- Ribbons : 1
Re: Base System Device no driver
2015/12/20 08:13:48
(permalink)
X79 dark, the newer revision without bluetooth. Tried the intel driver update utility, it didn't find anything. Reinstalled latest version of chipset drivers, no luck.
post edited by kristopher004 - 2015/12/20 08:35:57
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Base System Device no driver
2015/12/20 10:11:53
(permalink)
Use the Driver Install DVD that Came with your Motherboard and let it install the Base Drivers (All of Them). Once completed THEN you can update Drivers as needed. This also holds true with the X99 Motherboards. Cause is the user is not installing the Drivers in the Correct Order Needed. You must do this WITHOUT add-on Devices like Sound Cards or any PCIe Card other than a (Single) Graphics Card. And Install only ONE Graphics Card until the Base OS is installed and all your Devices are installed, that is No Yellow under Device Manager.
post edited by bcavnaugh - 2015/12/20 10:16:14
|
MhzManiac
SSC Member
- Total Posts : 772
- Reward points : 0
- Joined: 2011/03/22 06:01:42
- Location: U.P., Washington
- Status: offline
- Ribbons : 8
Re: Base System Device no driver
2015/12/20 12:47:53
(permalink)
I had one yellow ! after doing the online Win 10 upgrade from 8.1. I just recently installed the Dark chip set drivers from the site and it went away. Left all 3 of my video cards in, did not need to remove them. Maybe if it's a clean install of Windows 10 you may have this problem.
That is me in the picture, anyone else ever pet a live Lion?EVGA Z390 FTW (Bios 1.08) i9-9900KF 8 core, 32G Corsair Vengeance LPX Dual Chl 3000 XMP-1 , Intel SSD6 M.2 2TB, Samsung 840 PRO 1TB / 512G SSD, Gigabyte RTX 2080 Super , Win 11 Pro 64, EVGA Supernova 1300 watts, NZXT Phantom 820, Strix Raid DLX 7.1 surround, Corsair H100 Liquid , Dell S2417DG /S2409W / Acer XB241H Predator / Samsung C24F390 Curve/ Oculus Rift S VR
|
kristopher004
New Member
- Total Posts : 48
- Reward points : 0
- Joined: 2013/04/16 19:19:46
- Status: offline
- Ribbons : 1
Re: Base System Device no driver
2015/12/20 15:03:00
(permalink)
Fresh install, removed all extra devices, installed drivers from disc and same problem. Anyone else install a fresh windows 10 with the dark and have this problem?
|
CSPlayer089
iCX Member
- Total Posts : 462
- Reward points : 0
- Joined: 2005/12/20 13:49:12
- Location: Naperville, IL
- Status: offline
- Ribbons : 1
Re: Base System Device no driver
2015/12/20 15:17:08
(permalink)
kristopher004
Fresh install, removed all extra devices, installed drivers from disc and same problem. Anyone else install a fresh windows 10 with the dark and have this problem?
Yes, and it went away when I installed the Chipset drivers from EVGA's driver download page for the Dark.
AsRock Z490 Taichi Intel Core i9 10900k Gigabyte AORUS 3080Ti Master 12GB EVGA SuperNOVA 1300G2 PSU 32GB (4x8GB) Mushkin Redline Lumina DDR4-3600 Creative Labs Soundblaster X G6 USB DAC/Sound Card EK Basic AIO 360 w/ 3 Noctua NF-P12 Redux WD Black SN850 1TB SSD Phanteks Enthoo 719 full tower case ASUS PG32UQ G-Sync Monitor Hyper X Alloy Elite Keyboard HyperX Pulsefire Dart/Steelseries QcK Mass mousepad Kingston Hyper X Cloud headset
|
MhzManiac
SSC Member
- Total Posts : 772
- Reward points : 0
- Joined: 2011/03/22 06:01:42
- Location: U.P., Washington
- Status: offline
- Ribbons : 8
Re: Base System Device no driver
2015/12/20 15:17:49
(permalink)
Is Intel Management enabled in the bios? Are you installing using stock speed settings?
That is me in the picture, anyone else ever pet a live Lion?EVGA Z390 FTW (Bios 1.08) i9-9900KF 8 core, 32G Corsair Vengeance LPX Dual Chl 3000 XMP-1 , Intel SSD6 M.2 2TB, Samsung 840 PRO 1TB / 512G SSD, Gigabyte RTX 2080 Super , Win 11 Pro 64, EVGA Supernova 1300 watts, NZXT Phantom 820, Strix Raid DLX 7.1 surround, Corsair H100 Liquid , Dell S2417DG /S2409W / Acer XB241H Predator / Samsung C24F390 Curve/ Oculus Rift S VR
|
kristopher004
New Member
- Total Posts : 48
- Reward points : 0
- Joined: 2013/04/16 19:19:46
- Status: offline
- Ribbons : 1
Re: Base System Device no driver
2015/12/20 15:28:24
(permalink)
Yes, I reset speed settings before I did the fresh install. I don't remember seeing Alan intel management setting in the bios, do you know where its at?
|
MhzManiac
SSC Member
- Total Posts : 772
- Reward points : 0
- Joined: 2011/03/22 06:01:42
- Location: U.P., Washington
- Status: offline
- Ribbons : 8
Re: Base System Device no driver
2015/12/20 15:38:32
(permalink)
 Looking at it again it's the Directed I/O configuration which is off by default.
post edited by MhzManiac - 2015/12/20 15:42:29
Attached Image(s)
That is me in the picture, anyone else ever pet a live Lion?EVGA Z390 FTW (Bios 1.08) i9-9900KF 8 core, 32G Corsair Vengeance LPX Dual Chl 3000 XMP-1 , Intel SSD6 M.2 2TB, Samsung 840 PRO 1TB / 512G SSD, Gigabyte RTX 2080 Super , Win 11 Pro 64, EVGA Supernova 1300 watts, NZXT Phantom 820, Strix Raid DLX 7.1 surround, Corsair H100 Liquid , Dell S2417DG /S2409W / Acer XB241H Predator / Samsung C24F390 Curve/ Oculus Rift S VR
|
kristopher004
New Member
- Total Posts : 48
- Reward points : 0
- Joined: 2013/04/16 19:19:46
- Status: offline
- Ribbons : 1
Re: Base System Device no driver
2015/12/20 15:55:31
(permalink)
enabling/disabling vt-d didn't fix it, was a good idea though.
@CSPlayer089, I've installed latest chipset driver and didn't fix it, did you have ~10 base system devices yellow as well, or just one like MhzManiac?
|
bobbyjimmy
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2014/04/21 02:18:46
- Status: offline
- Ribbons : 0
Re: Base System Device no driver
2015/12/20 16:02:16
(permalink)
Could try Driver Booster (I'd link it, but not enough posts)- sounds gimmicky, but actually works.
It has some add-ons if you don't read the install properly.
It goes through all your crap and updates what needs to be - you can select if you don't want them updated as well.
|
kristopher004
New Member
- Total Posts : 48
- Reward points : 0
- Joined: 2013/04/16 19:19:46
- Status: offline
- Ribbons : 1
Re: Base System Device no driver
2015/12/20 16:10:33
(permalink)
Just figured it out, it was because I had perfmon and dfx registers unhide on in bios for some reason. Goes away when I hide them.
|
MhzManiac
SSC Member
- Total Posts : 772
- Reward points : 0
- Joined: 2011/03/22 06:01:42
- Location: U.P., Washington
- Status: offline
- Ribbons : 8
Re: Base System Device no driver
2015/12/20 18:04:56
(permalink)
kristopher004
Just figured it out, it was because I had perfmon and dfx registers unhide on in bios for some reason. Goes away when I hide them.
I always wondered what would happen if the unhide was selected, now I know not to do that. Good job staying on it and figuring it out.
That is me in the picture, anyone else ever pet a live Lion?EVGA Z390 FTW (Bios 1.08) i9-9900KF 8 core, 32G Corsair Vengeance LPX Dual Chl 3000 XMP-1 , Intel SSD6 M.2 2TB, Samsung 840 PRO 1TB / 512G SSD, Gigabyte RTX 2080 Super , Win 11 Pro 64, EVGA Supernova 1300 watts, NZXT Phantom 820, Strix Raid DLX 7.1 surround, Corsair H100 Liquid , Dell S2417DG /S2409W / Acer XB241H Predator / Samsung C24F390 Curve/ Oculus Rift S VR
|
KenMcC
CLASSIFIED Member
- Total Posts : 3329
- Reward points : 0
- Joined: 2010/07/02 07:02:23
- Location: Garland, TX
- Status: offline
- Ribbons : 21
Re: Base System Device no driver
2015/12/21 11:19:22
(permalink)
The unhide works fine if you are having issues with a particular device. I have used the procedure I post many times when I have installed and reinstalled drivers for a device which is acting up. Strange for this unhide setting to be on even with a fresh install with a cleared BIOS and formatted drive. 
KenMcC Z170 Classy K; i7-6700 CPU, Corsair CMK16GX4M2A2400C14 Seasonic SSR-360GP 360W; Samsung 950 Pro M.2 256 GB Samsung 850 Evo 500 GB SATA Samsung 850 Evo 256 GB SATA Samsung SSD 840 Series 250 GB SATA Samsung 860 EVO 1 TB SATA Windows 10 x64 Prof.
|