EVGA_Lee
Moderator
- Total Posts : 4243
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Fixes a couple issues with voltages for XOC situations. BIOS 1.06 (E599 DARK)- Fixes hang at POST (0x7F) in safe mode due to VCCIO too high.
- Adds Vcore Override Support for ELEET X1 CPU PerCore mode. Allows Vcore to be set higher than 1.72V*
*Requires EVGA ELEET X1 v1.0.8 or newer version, which can be located here: https://www.evga.com/eleetx1/
Windows Installation- Download the correct .zip file below for your motherboard:
121-RL-E599-KR - EVGA Z590 DARK - v1.06- First go into your BIOS and load defaults, save and exit
- Close all open programs.
- Go into the folder where you unzipped this package and double-click update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
- NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.
BIOS Installation- Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
- Reboot the machine and go into the system BIOS
- From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
- Select the .bin file you wish to flash.
Please let me know if anyone runs into problems with this update. Thanks!
|
Braegnok
Superclocked Member
- Total Posts : 173
- Reward points : 0
- Joined: 2021/09/10 15:40:32
- Status: offline
- Ribbons : 10
Re: BIOS Updates for Z590 DARK (1.06)
2021/10/08 16:02:10
(permalink)
Thanks _LeeM.
Does latest update 1.06 have any changes required to improve system stability/performance when overclocking memory.
|
WebsterRKL
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2021/09/09 09:10:26
- Status: offline
- Ribbons : 0
Re: BIOS Updates for Z590 DARK (1.06)
2021/10/09 06:02:05
(permalink)
That 5333lb elephant in the room. 
|
babayega
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2020/07/30 08:18:30
- Status: offline
- Ribbons : 1
Re: BIOS Updates for Z590 DARK (1.06)
2021/10/10 00:19:37
(permalink)
in the download section for 1.06 it says - Fixes hang at POST (0x7F) in safe mode due to VCCIO too high.
- Adds Vcore Override Support for ELEET X1 CPU PerCore mode. Allows Vcore to be set higher than 1.72V*.
|
babayega
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2020/07/30 08:18:30
- Status: offline
- Ribbons : 1
Re: BIOS Updates for Z590 DARK (1.06)
2021/10/10 01:50:31
(permalink)
BIOS 1.05 Updates
- Fixes issue where hang occurs during POST at code 0xF0 when VSA voltage set to over 1.6V.
- Fixes issue where Ring ratio could not be adjusted when using CPU per-core mode.
|
EVGA_Lee
Moderator
- Total Posts : 4243
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: BIOS Updates for Z590 DARK (1.06)
2021/10/11 10:09:28
(permalink)
babayega
in the download section for 1.06 it says
- Fixes hang at POST (0x7F) in safe mode due to VCCIO too high.
- Adds Vcore Override Support for ELEET X1 CPU PerCore mode. Allows Vcore to be set higher than 1.72V*.
Heh, sometimes you get distracted in the middle of posting release notes. Thanks for the catch.
|
EVGA_Lee
Moderator
- Total Posts : 4243
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: BIOS Updates for Z590 DARK (1.06)
2021/10/11 10:11:19
(permalink)
Braegnok
Thanks _LeeM.
Does latest update 1.06 have any changes required to improve system stability/performance when overclocking memory.
Although it's always possible some under the hood changes were made, nothing memory-related was part of the release notes. If you have some specific issue, please let me know what's going on. Of course, if you've already described this in detail elsewhere, please link me.
|
rblaes_99
FTW Member
- Total Posts : 1605
- Reward points : 0
- Joined: 2007/02/17 06:25:20
- Status: offline
- Ribbons : 15
Re: BIOS Updates for Z590 DARK (1.06)
2021/10/11 11:07:02
(permalink)
EVGATech_LeeM
Braegnok
Thanks _LeeM.
Does latest update 1.06 have any changes required to improve system stability/performance when overclocking memory.
Although it's always possible some under the hood changes were made, nothing memory-related was part of the release notes.
If you have some specific issue, please let me know what's going on. Of course, if you've already described this in detail elsewhere, please link me.
I think we had all had issues trying to get RAM to run stable past 4800mhz. I have a few sets of the 5333 stuff that I mailed to several members around here and none of us had much luck.
|
babayega
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2020/07/30 08:18:30
- Status: offline
- Ribbons : 1
Re: BIOS Updates for Z590 DARK (1.06)
2021/10/11 15:21:08
(permalink)
EVGATech_LeeM
Braegnok
Thanks _LeeM.
Does latest update 1.06 have any changes required to improve system stability/performance when overclocking memory.
Although it's always possible some under the hood changes were made, nothing memory-related was part of the release notes.
If you have some specific issue, please let me know what's going on. Of course, if you've already described this in detail elsewhere, please link me.
the cpu per core oc with ht off still doesnt work in the bios.
post edited by babayega - 2021/10/11 15:22:34
|
DerpFails
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2017/10/14 15:10:00
- Status: offline
- Ribbons : 0
Re: BIOS Updates for Z590 DARK (1.06)
2021/10/15 07:48:59
(permalink)
Is there any chance y'all can get fully manual RTL working with Rocket Lake? Performance is falling behind the Z590 OC Formula and Tachyon, which can generally set 1-2 tighter per channel when using gear 1. I have tested and compared.
Also, can settings to disable spread spectrum and HPET be added? That would be greatly appreciated!
|