EVGA
Prev Thread
Next Thread

4-way 2011 motherboard

Page: < 12 Showing page 2 of 2
Author
Post
Essentials Only Full Version
lundrog
Superclocked Member
  • Total Posts : 125
  • Reward points : 0
  • Joined: 1/17/2010
  • Status: offline
  • Ribbons : 0
Re:4-way 2011 motherboard Sunday, March 10, 2013 6:24 PM (permalink)
Hmm well I'm going to give this memory a shot, since I have it.

What timings will I need to enable on the board for the ram do you think?

It will not auto set at a horrid speed? HA

Roger Lund - Turbo VMware Nerd.
Intel I7 3930k in Thermaltake 2.0 extreme water AIO push config
ASUS Rampage IV Extreme EATX Motherboard
Kingston HyperX Beast 64 GB Kit (8x8 GB) 2133MHz DDR3 PC3-17000
3X EVGA GTX 980 SC in SLI
3x Micron M500DC 256GB, 2x Micron M600 500GB , Samsung 1TB Evo.
2x Evga supernova 1300 g2 PSU w Vantacor Dual PSU Adapter Cable 24 Pin 2-way
Corsair 900d case



#31
HalloweenWeed
CLASSIFIED Member
  • Total Posts : 4792
  • Reward points : 0
  • Joined: 11/13/2009
  • Location: Maine, USA
  • Status: offline
  • Ribbons : 37
Re:4-way 2011 motherboard Sunday, March 10, 2013 7:36 PM (permalink)
lundrog

Hmm well I'm going to give this memory a shot, since I have it.

What timings will I need to enable on the board for the ram do you think?

It will not auto set at a horrid speed? HA

See post #27.

Main (gaming) rig: i7-3930K; Asus Rampage IV Extreme; H100 W/p-p Excaliburs, AS5; MSI 7870 2GD5/OC; Crucial M4 SSD 256GB.
See my primary ModsRigs: Adam for the rest, and I have a second (wife's) rig Asus Rampage III Extreme & 960: Eve.

   
Overclocking is useless to me if it is not rock stable.
#32
lundrog
Superclocked Member
  • Total Posts : 125
  • Reward points : 0
  • Joined: 1/17/2010
  • Status: offline
  • Ribbons : 0
Re:4-way 2011 motherboard Wednesday, March 13, 2013 12:46 AM (permalink)
UPDATE:
 
I replaced my 3570k with a 3930k, and my 1155 motherboard with a ASUS Rampage IV Extreme motherboard.

I also replaced my AIO water cooler with a Thermaltake CLW0217 Water 2.0 Extreme/All-In-One Liquid Cooling System.




Spec's are in my Sig, Using five 140mm Fractal Case Fan's. And a 140mm Silverstone Case fan on the side door for intake.

I have six ssd's in raid in a Thermaltake MAX-1562 5.25 HDD bay, as you can see this opened up my case.

I have to say , I am very happy with this rig!

Comments welcome!

Roger Lund - Turbo VMware Nerd.
Intel I7 3930k in Thermaltake 2.0 extreme water AIO push config
ASUS Rampage IV Extreme EATX Motherboard
Kingston HyperX Beast 64 GB Kit (8x8 GB) 2133MHz DDR3 PC3-17000
3X EVGA GTX 980 SC in SLI
3x Micron M500DC 256GB, 2x Micron M600 500GB , Samsung 1TB Evo.
2x Evga supernova 1300 g2 PSU w Vantacor Dual PSU Adapter Cable 24 Pin 2-way
Corsair 900d case



#33
HalloweenWeed
CLASSIFIED Member
  • Total Posts : 4792
  • Reward points : 0
  • Joined: 11/13/2009
  • Location: Maine, USA
  • Status: offline
  • Ribbons : 37
Re:4-way 2011 motherboard Wednesday, March 13, 2013 7:58 PM (permalink)
Wow, you outta be happy with that. That's some serious gaming render & PhysX power you have there. I see the SLI bridge was not installed at the time of the pic. Are you going x3 and PhysX? That's what I might do with that. Now you should put it in ModsRigs (and 5 more pics). I see you have one RAID 0 W/3 SSDs. So what type other RAID did you go with?

Main (gaming) rig: i7-3930K; Asus Rampage IV Extreme; H100 W/p-p Excaliburs, AS5; MSI 7870 2GD5/OC; Crucial M4 SSD 256GB.
See my primary ModsRigs: Adam for the rest, and I have a second (wife's) rig Asus Rampage III Extreme & 960: Eve.

   
Overclocking is useless to me if it is not rock stable.
#34
lundrog
Superclocked Member
  • Total Posts : 125
  • Reward points : 0
  • Joined: 1/17/2010
  • Status: offline
  • Ribbons : 0
Re:4-way 2011 motherboard Wednesday, March 13, 2013 10:58 PM (permalink)
I think I am going to go with all with a four way sli.

I am really thinking of doing a raid 5, as I am not even close maxing out the bandwidth.

Roger Lund - Turbo VMware Nerd.
Intel I7 3930k in Thermaltake 2.0 extreme water AIO push config
ASUS Rampage IV Extreme EATX Motherboard
Kingston HyperX Beast 64 GB Kit (8x8 GB) 2133MHz DDR3 PC3-17000
3X EVGA GTX 980 SC in SLI
3x Micron M500DC 256GB, 2x Micron M600 500GB , Samsung 1TB Evo.
2x Evga supernova 1300 g2 PSU w Vantacor Dual PSU Adapter Cable 24 Pin 2-way
Corsair 900d case



#35
Page: < 12 Showing page 2 of 2
Home » All Forums » [Computer Hardware & Software] » Hardware » 4-way 2011 motherboard (Page 2)
Jump to: