EVGA

4090 modDIY power cables received

Author
JayVenturi
Superclocked Member
  • Total Posts : 111
  • Reward points : 0
  • Joined: 2012/09/04 11:51:26
  • Status: offline
  • Ribbons : 5
2022/11/02 06:58:14 (permalink)
So I received the modDIY power cables for my 4090s. 
 
configured with 600w full power each, the corner / bend of the cable happens easily just from gravity. Cables (without sleeving) feel (compared to sleeving) light as hair and just as flexible. No stress on the 4090 sockets.  
 
I was going to get the right angle adapter from CableMod, but now that the cables are here from nodDIY I no longer see the need for the right angle adapter from Cablemod.
 
Here are some pics,  seriously, cables just fall into place like a small pony tail. Made cable management easier in a SFF case:


 

 

2x 4090 RTX Founders Edition
2x AMD 7773x Epyc  (128/256 cores), Gigabyte MZ72-HB0 Dual socket motherboard
1 TB RAM  DDR4 ECC LRDIMMs   1650W digital power supply
(Data drive)  Raid 0 Micron 9300 Max (12.8TB each / 51.2TB array) 
(OS Drive) Sabrent Rocket 4 Plus (8TB). Back up array Micron 9300 Max
Asus PA32UCG-K monitor, MS Data Center 2022 & Ubuntu
All air cooled, CPU temps idle 29C, Load 49c,   GPU temps idle 29C, load max 51C
SFF case, ultra quiet operation
#1

28 Replies Related Threads

    the_Scarlet_one
    formerly Scarlet-tech
    • Total Posts : 24581
    • Reward points : 0
    • Joined: 2013/11/13 02:48:57
    • Location: East Coast
    • Status: offline
    • Ribbons : 79
    Re: 4090 modDIY power cables received 2022/11/02 07:06:09 (permalink)
    That right there, that’s beautiful!
    #2
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 101760
    • Reward points : 0
    • Joined: 2004/10/05 12:44:35
    • Location: Netherlands
    • Status: offline
    • Ribbons : 84
    Re: 4090 modDIY power cables received 2022/11/02 07:09:20 (permalink)
    the_Scarlet_one
    That right there, that’s beautiful!

    +1

    AMD Ryzen 9 7950X,  Corsair Mp700 Pro M.2, 64GB Corsair Dominator Titanium DDR5  X670E Steel Legend, MSI RTX 4090 Associate Code: H5U80QBH6BH0AXF. I am NOT an employee of EVGA

    #3
    the_Scarlet_one
    formerly Scarlet-tech
    • Total Posts : 24581
    • Reward points : 0
    • Joined: 2013/11/13 02:48:57
    • Location: East Coast
    • Status: offline
    • Ribbons : 79
    Re: 4090 modDIY power cables received 2022/11/02 07:29:50 (permalink)
    austin86



    Get out of here with that, lol.
    #4
    JayVenturi
    Superclocked Member
    • Total Posts : 111
    • Reward points : 0
    • Joined: 2012/09/04 11:51:26
    • Status: offline
    • Ribbons : 5
    Re: 4090 modDIY power cables received 2022/11/02 10:06:04 (permalink)
    deep learning, for dissertation

    2x 4090 RTX Founders Edition
    2x AMD 7773x Epyc  (128/256 cores), Gigabyte MZ72-HB0 Dual socket motherboard
    1 TB RAM  DDR4 ECC LRDIMMs   1650W digital power supply
    (Data drive)  Raid 0 Micron 9300 Max (12.8TB each / 51.2TB array) 
    (OS Drive) Sabrent Rocket 4 Plus (8TB). Back up array Micron 9300 Max
    Asus PA32UCG-K monitor, MS Data Center 2022 & Ubuntu
    All air cooled, CPU temps idle 29C, Load 49c,   GPU temps idle 29C, load max 51C
    SFF case, ultra quiet operation
    #5
    atfrico
    Omnipotent Enthusiast
    • Total Posts : 12753
    • Reward points : 0
    • Joined: 2008/05/20 16:16:06
    • Location: <--Dip, Dip, Potato Chip!-->
    • Status: offline
    • Ribbons : 25
    Re: 4090 modDIY power cables received 2022/11/02 10:34:20 (permalink)
    Extremely nice clean build cables look great

    Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
     
     
    Affiliate Code: 3T15O1S07G
    #6
    bill1024
    Omnipotent Enthusiast
    • Total Posts : 10954
    • Reward points : 0
    • Joined: 2008/10/18 01:01:10
    • Status: offline
    • Ribbons : 65
    Re: 4090 modDIY power cables received 2022/11/02 19:23:37 (permalink)
    I see you have a 2P system, what processors are you running?
    Do you do any BOINC projects?

    Nice looking rig by the way. My 2P and 4P systems are open on a plywood board no where that good looking!

     Life is too short to carry a cheap pocket knife

       
     
    #7
    ty_ger07
    Insert Custom Title Here
    • Total Posts : 21144
    • Reward points : 0
    • Joined: 2008/04/10 23:48:15
    • Location: traveler
    • Status: offline
    • Ribbons : 270
    Re: 4090 modDIY power cables received 2022/11/02 19:32:20 (permalink)
    bill1024
    I see you have a 2P system, what processors are you running?

    https://forums.evga.com/G...15TB-ram-m3584355.aspx

    ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
    My EVGA Score: 1546 • Zero Associates Points • I don't shill

    #8
    bill1024
    Omnipotent Enthusiast
    • Total Posts : 10954
    • Reward points : 0
    • Joined: 2008/10/18 01:01:10
    • Status: offline
    • Ribbons : 65
    Re: 4090 modDIY power cables received 2022/11/02 21:44:37 (permalink)
    Thanks Tyger

    Holy smokes!!! Wow that’s really really nice.
    I asked if you do BOINC not sure if the do or not, but you have an open invitation to join the EVGA Folding and BOINC teams if you ever want to. BOINC is a bit more fun with all the competitions we do.

    Anyway nice rig and good luck with the new GPUs. Thanks for showing it here.

     Life is too short to carry a cheap pocket knife

       
     
    #9
    Nereus
    Captain Goodvibes
    • Total Posts : 18825
    • Reward points : 0
    • Joined: 2009/04/09 20:05:53
    • Location: Brooklyn, NYC.
    • Status: offline
    • Ribbons : 58
    Re: 4090 modDIY power cables received 2022/11/02 23:23:27 (permalink)
     
    Beast.
     


      BUILD 1 2   |   MINI-ITX BUILD   |   MODSRIGS $1K WIN   |   HEATWARE 111-0-0   |   ASSOCIATE CODE CSKKXUT5Q9GVAFR

    #10
    JayVenturi
    Superclocked Member
    • Total Posts : 111
    • Reward points : 0
    • Joined: 2012/09/04 11:51:26
    • Status: offline
    • Ribbons : 5
    Re: 4090 modDIY power cables received 2022/11/03 09:15:34 (permalink)
    bill1024
    Thanks Tyger

    Holy smokes!!! Wow that’s really really nice.
    I asked if you do BOINC not sure if the do or not, but you have an open invitation to join the EVGA Folding and BOINC teams if you ever want to. BOINC is a bit more fun with all the competitions we do.

    Anyway nice rig and good luck with the new GPUs. Thanks for showing it here.



     
    I'd like to find out more about it, sounds pretty interesting

    2x 4090 RTX Founders Edition
    2x AMD 7773x Epyc  (128/256 cores), Gigabyte MZ72-HB0 Dual socket motherboard
    1 TB RAM  DDR4 ECC LRDIMMs   1650W digital power supply
    (Data drive)  Raid 0 Micron 9300 Max (12.8TB each / 51.2TB array) 
    (OS Drive) Sabrent Rocket 4 Plus (8TB). Back up array Micron 9300 Max
    Asus PA32UCG-K monitor, MS Data Center 2022 & Ubuntu
    All air cooled, CPU temps idle 29C, Load 49c,   GPU temps idle 29C, load max 51C
    SFF case, ultra quiet operation
    #11
    JayVenturi
    Superclocked Member
    • Total Posts : 111
    • Reward points : 0
    • Joined: 2012/09/04 11:51:26
    • Status: offline
    • Ribbons : 5
    Re: 4090 modDIY power cables received 2022/11/05 07:35:51 (permalink)
    austin86



    Very creative sir, I knew all along something was missing!

    2x 4090 RTX Founders Edition
    2x AMD 7773x Epyc  (128/256 cores), Gigabyte MZ72-HB0 Dual socket motherboard
    1 TB RAM  DDR4 ECC LRDIMMs   1650W digital power supply
    (Data drive)  Raid 0 Micron 9300 Max (12.8TB each / 51.2TB array) 
    (OS Drive) Sabrent Rocket 4 Plus (8TB). Back up array Micron 9300 Max
    Asus PA32UCG-K monitor, MS Data Center 2022 & Ubuntu
    All air cooled, CPU temps idle 29C, Load 49c,   GPU temps idle 29C, load max 51C
    SFF case, ultra quiet operation
    #12
    SAMOEDADDY
    CLASSIFIED Member
    • Total Posts : 2718
    • Reward points : 0
    • Joined: 2008/03/23 23:31:38
    • Status: offline
    • Ribbons : 2
    Re: 4090 modDIY power cables received 2023/01/04 04:18:25 (permalink)
    I was googling an answer and your post came up. I just received a modDIY cable for my 4090 also, but my question is how is the quality and have you had any issues? My concern is modDIY cables are to two 8pin whereas Cablemod cables are to either a 4 or 3 8pin. Just makes me wonder why the major difference. 

    "NO SUCH THING AS FUTURE PROOF"
    Be Quiet! Silent Base 802 Black Window * MSI X570 MEG ACE * Amd 5950x * Gigabyte RTX 4090 Gaming OC * 64GB DDR4 GSkill * Corsair H115i Pro * Evga Supernova GT 1300 * Logitech G35 * Win 11* Samsung 49" Monitor
    #13
    808sting
    iCX Member
    • Total Posts : 462
    • Reward points : 0
    • Joined: 2012/04/13 15:04:51
    • Location: US
    • Status: offline
    • Ribbons : 6
    Re: 4090 modDIY power cables received 2023/01/04 13:05:10 (permalink)
    SAMOEDADDY
    I was googling an answer and your post came up. I just received a modDIY cable for my 4090 also, but my question is how is the quality and have you had any issues? My concern is modDIY cables are to two 8pin whereas Cablemod cables are to either a 4 or 3 8pin. Just makes me wonder why the major difference.


    If your PS shares a common 12v rail and the cable wire gauge is good, technically 2/3/4 connectors should work.  Corsair uses 2 connectors for their 12-pin adapter.  My Cablemod 4-connector pigtails into the same shared 12-conductor wire that goes into the card.  I've used CableMod for many builds and trust their quality.  Read positive things about modDIY.

    i9 13900KS, Asus ROG Hero Z690 MB, 32GB G.Skill DDR5-6400
    Gigabyte 4090 Gaming OC
    External open-loop w/Velocity2 WB
    Corsair 900D Case
    Firecuda SSD 1TB & 2TB, EVO 970P 1TB, Black 8TB
    Asus & LG BD-RE
    Corsair AX1600i PS
    LG 38GL950B-G
    #14
    SAMOEDADDY
    CLASSIFIED Member
    • Total Posts : 2718
    • Reward points : 0
    • Joined: 2008/03/23 23:31:38
    • Status: offline
    • Ribbons : 2
    Re: 4090 modDIY power cables received 2023/01/04 14:16:53 (permalink)
    808sting
    SAMOEDADDY
    I was googling an answer and your post came up. I just received a modDIY cable for my 4090 also, but my question is how is the quality and have you had any issues? My concern is modDIY cables are to two 8pin whereas Cablemod cables are to either a 4 or 3 8pin. Just makes me wonder why the major difference.


    If your PS shares a common 12v rail and the cable wire gauge is good, technically 2/3/4 connectors should work.  Corsair uses 2 connectors for their 12-pin adapter.  My Cablemod 4-connector pigtails into the same shared 12-conductor wire that goes into the card.  I've used CableMod for many builds and trust their quality.  Read positive things about modDIY.


    I just finished trying it a bit ago and it acted weird. My 49 inch 1440p monitor would only go to 1080. It was like it couldn't handle the three monitors and resolution. 

    "NO SUCH THING AS FUTURE PROOF"
    Be Quiet! Silent Base 802 Black Window * MSI X570 MEG ACE * Amd 5950x * Gigabyte RTX 4090 Gaming OC * 64GB DDR4 GSkill * Corsair H115i Pro * Evga Supernova GT 1300 * Logitech G35 * Win 11* Samsung 49" Monitor
    #15
    JayVenturi
    Superclocked Member
    • Total Posts : 111
    • Reward points : 0
    • Joined: 2012/09/04 11:51:26
    • Status: offline
    • Ribbons : 5
    Re: 4090 modDIY power cables received 2023/01/04 14:17:55 (permalink)
    I have not had any issues. Granted I have not messed with them since I plugged them, but no issues so far
    My cables are 3x8 connectors per cable to the PSU. I have my PSU set to "single rail mode"
     
    J

    2x 4090 RTX Founders Edition
    2x AMD 7773x Epyc  (128/256 cores), Gigabyte MZ72-HB0 Dual socket motherboard
    1 TB RAM  DDR4 ECC LRDIMMs   1650W digital power supply
    (Data drive)  Raid 0 Micron 9300 Max (12.8TB each / 51.2TB array) 
    (OS Drive) Sabrent Rocket 4 Plus (8TB). Back up array Micron 9300 Max
    Asus PA32UCG-K monitor, MS Data Center 2022 & Ubuntu
    All air cooled, CPU temps idle 29C, Load 49c,   GPU temps idle 29C, load max 51C
    SFF case, ultra quiet operation
    #16
    dragomirc
    SSC Member
    • Total Posts : 760
    • Reward points : 0
    • Joined: 2006/08/14 20:40:01
    • Location: Rochester, US
    • Status: offline
    • Ribbons : 0
    Re: 4090 modDIY power cables received 2023/01/04 14:31:49 (permalink)
    Almost peace of art 
     
    Kinda crossover from open case and testbed flavored with mighty components.
     
    Cheers!
    #17
    Nereus
    Captain Goodvibes
    • Total Posts : 18825
    • Reward points : 0
    • Joined: 2009/04/09 20:05:53
    • Location: Brooklyn, NYC.
    • Status: offline
    • Ribbons : 58
    Re: 4090 modDIY power cables received 2023/01/04 15:12:37 (permalink)
     
    FYI, they are in stock in the US now - don't have to wait weeks for it to arrive from overseas.
    https://usstore.cablemod.com/product-category/12vhpwr/
     


      BUILD 1 2   |   MINI-ITX BUILD   |   MODSRIGS $1K WIN   |   HEATWARE 111-0-0   |   ASSOCIATE CODE CSKKXUT5Q9GVAFR

    #18
    SAMOEDADDY
    CLASSIFIED Member
    • Total Posts : 2718
    • Reward points : 0
    • Joined: 2008/03/23 23:31:38
    • Status: offline
    • Ribbons : 2
    Re: 4090 modDIY power cables received 2023/01/04 15:34:23 (permalink)
    Nereus
     
    FYI, they are in stock in the US now - don't have to wait weeks for it to arrive from overseas.
    https://usstore.cablemod.com/product-category/12vhpwr/
     


    I have a Evga Supernova 1300GT. It doesn't look like they have the one for my PSU. That is good to know though because I didn't see them before. Only did the custom one and they are not even starting to make them till February.

    "NO SUCH THING AS FUTURE PROOF"
    Be Quiet! Silent Base 802 Black Window * MSI X570 MEG ACE * Amd 5950x * Gigabyte RTX 4090 Gaming OC * 64GB DDR4 GSkill * Corsair H115i Pro * Evga Supernova GT 1300 * Logitech G35 * Win 11* Samsung 49" Monitor
    #19
    SAMOEDADDY
    CLASSIFIED Member
    • Total Posts : 2718
    • Reward points : 0
    • Joined: 2008/03/23 23:31:38
    • Status: offline
    • Ribbons : 2
    Re: 4090 modDIY power cables received 2023/01/04 15:36:41 (permalink)
    Nevermind I see it now Thanks!!
     

    "NO SUCH THING AS FUTURE PROOF"
    Be Quiet! Silent Base 802 Black Window * MSI X570 MEG ACE * Amd 5950x * Gigabyte RTX 4090 Gaming OC * 64GB DDR4 GSkill * Corsair H115i Pro * Evga Supernova GT 1300 * Logitech G35 * Win 11* Samsung 49" Monitor
    #20
    kraade
    CLASSIFIED Member
    • Total Posts : 2355
    • Reward points : 0
    • Joined: 2020/10/18 09:05:52
    • Location: Georgia
    • Status: offline
    • Ribbons : 7
    Re: 4090 modDIY power cables received 2023/01/04 16:07:40 (permalink)
    That is a great build , thanks for sharing
    #21
    Nereus
    Captain Goodvibes
    • Total Posts : 18825
    • Reward points : 0
    • Joined: 2009/04/09 20:05:53
    • Location: Brooklyn, NYC.
    • Status: offline
    • Ribbons : 58
    Re: 4090 modDIY power cables received 2023/01/04 18:07:55 (permalink)
     
    Interesting.. they only seem to have the 16-pin to triple 8-pin models. The cable I ordered that came from overseas was 16-pin to quad 8-pin (E-Series Pro ModFlex sleeved).
     
    They do have a configurator though (link).. if I make up the cable they sent me from o/seas, it costs $54.40 on their configurator.. I paid $29.90 for it (which is the price for the triple 8-pin). Winning. 
     
     
    post edited by Nereus - 2023/01/04 18:32:09


      BUILD 1 2   |   MINI-ITX BUILD   |   MODSRIGS $1K WIN   |   HEATWARE 111-0-0   |   ASSOCIATE CODE CSKKXUT5Q9GVAFR

    #22
    808sting
    iCX Member
    • Total Posts : 462
    • Reward points : 0
    • Joined: 2012/04/13 15:04:51
    • Location: US
    • Status: offline
    • Ribbons : 6
    Re: 4090 modDIY power cables received 2023/01/04 18:22:51 (permalink)
    Nereus
    Interesting.. they only seem to have the 16-pin to triple 8-pin models. The cable I ordered that came from overseas was 16-pin to quad 8-pin (E-Series Pro ModFlex sleeved).
     
    They do have a configurator though (link).. if I make up the cable they sent me from o/seas, it costs $54.40 on their configurator.. I paid $29.90 for it (which is the price for the triple 8-pin with 3 combs, mine is quad 8-pin with 5 combs). Winning.



    The US site had limited options.  The Global site has all premade and custom options.  I ordered the Quad, but it took weeks going to customs.  Waiting for the Right-angle adapter.
    https://store.cablemod.com/12vhpwr-angled-adapter/

    i9 13900KS, Asus ROG Hero Z690 MB, 32GB G.Skill DDR5-6400
    Gigabyte 4090 Gaming OC
    External open-loop w/Velocity2 WB
    Corsair 900D Case
    Firecuda SSD 1TB & 2TB, EVO 970P 1TB, Black 8TB
    Asus & LG BD-RE
    Corsair AX1600i PS
    LG 38GL950B-G
    #23
    Nereus
    Captain Goodvibes
    • Total Posts : 18825
    • Reward points : 0
    • Joined: 2009/04/09 20:05:53
    • Location: Brooklyn, NYC.
    • Status: offline
    • Ribbons : 58
    Re: 4090 modDIY power cables received 2023/01/04 18:36:00 (permalink)
    808sting
    Nereus
    Interesting.. they only seem to have the 16-pin to triple 8-pin models. The cable I ordered that came from overseas was 16-pin to quad 8-pin (E-Series Pro ModFlex sleeved).
     
    They do have a configurator though (link).. if I make up the cable they sent me from o/seas, it costs $54.40 on their configurator.. I paid $29.90 for it (which is the price for the triple 8-pin with 3 combs, mine is quad 8-pin with 5 combs). Winning.

    The US site had limited options.  The Global site has all premade and custom options.  I ordered the Quad, but it took weeks going to customs.  Waiting for the Right-angle adapter.
    https://store.cablemod.com/12vhpwr-angled-adapter/

    Those right-angle adapters will be great.
     


      BUILD 1 2   |   MINI-ITX BUILD   |   MODSRIGS $1K WIN   |   HEATWARE 111-0-0   |   ASSOCIATE CODE CSKKXUT5Q9GVAFR

    #24
    kraade
    CLASSIFIED Member
    • Total Posts : 2355
    • Reward points : 0
    • Joined: 2020/10/18 09:05:52
    • Location: Georgia
    • Status: offline
    • Ribbons : 7
    Re: 4090 modDIY power cables received 2023/01/05 11:54:04 (permalink)
    I've had my cable over a month, hope I can find it when the Card comes in Saturday.
    #25
    kissTheApex
    SSC Member
    • Total Posts : 624
    • Reward points : 0
    • Joined: 2021/02/22 15:30:59
    • Status: offline
    • Ribbons : 0
    Re: 4090 modDIY power cables received 2023/01/28 09:04:07 (permalink)
    It’s not ModPro Flex, but Amazon has the soft pvc quad 8pin version in stock.
    #26
    nofearek9
    iCX Member
    • Total Posts : 436
    • Reward points : 0
    • Joined: 2010/11/16 03:03:33
    • Location: Cyprus
    • Status: offline
    • Ribbons : 8
    Re: 4090 modDIY power cables received 2023/01/28 23:57:27 (permalink)
    i remember seen this monster few years ago (@servethehome),with "older" GPUs,hope with the upgraded GPUs you can now run mame emulator ;).Well done ,great build!
    btw did you removed the heatsinks from the ram ?
    post edited by nofearek9 - 2023/01/29 00:02:07

    Asus Rampage IV Black Edition,Intel Xeon e5-1680v2@4,5Ghz(36x125),Corsair XMS3 64GB DDR3(8x8)(2000Mhz),Samsung 980 PRO 512GB,EVGA GeForce RTX 2070 XC GAMING 8GB,Lian Li PC-60FNWB ,Corsair HX1000 PSU,Noctua NH-D15 .
    Asus Rampage III Gene,Intel Xeon X5660@ 4,5ghz,Corsair XMS3 48GB DDR3(6x8),Samsung 950 PRO 256GB,EVGA 1060 3GB SSC.
    Register your evga products           Buy evga products with discount
    #27
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 101760
    • Reward points : 0
    • Joined: 2004/10/05 12:44:35
    • Location: Netherlands
    • Status: offline
    • Ribbons : 84
    Re: 4090 modDIY power cables received 2023/01/29 03:54:34 (permalink)
    That is one fantastic PC mod. 

    AMD Ryzen 9 7950X,  Corsair Mp700 Pro M.2, 64GB Corsair Dominator Titanium DDR5  X670E Steel Legend, MSI RTX 4090 Associate Code: H5U80QBH6BH0AXF. I am NOT an employee of EVGA

    #28
    lastsamurairick
    CLASSIFIED Member
    • Total Posts : 2416
    • Reward points : 0
    • Joined: 2008/11/11 17:19:53
    • Location: Orlando,FL
    • Status: offline
    • Ribbons : 6
    Re: 4090 modDIY power cables received 2023/01/29 09:55:27 (permalink)
    Great job. I find this issue with the 4090 cable  dissapointing all those brain cell working at that enterprise and Yet this is a mistake I find on there behalf to show many IQ working togheter make a mess of things. 

      Intel 10900k @ 3.7 Stock
      EVGA Z490 Dark 
      EVGA GEFORCE RTX 3070Ti FTW3
      G SKILL TRIDENT Z ROYAL 32GB
      EVGA 1000G5
    #29
    Jump to:
  • Back to Mobile