EVGA

3090 FTW3 ULTRA Serial Numbers

Author
Post
Essentials Only Full Version
ZachTullier2
New Member
  • Total Posts : 28
  • Reward points : 0
  • Joined: 2021/06/01 18:27:23
  • Status: offline
  • Ribbons : 0
2021/07/26 09:25:30 (permalink)
What is the latest serial numbers for the 3090 ftw3 ultra? There isn't one central thread for referncing all the different serial numbers and pcb version... I've been seeing people mention back lip card, rev. 1, etc....

What serial, rev. #, or whatever is EVGA sending out now as "the end all, fix all issues" card?

I have this exact card and I'm kind worried that it will stop working at some point.
post edited by the_Scarlet_one - 2021/07/26 12:01:04
#1

9 Replies Related Threads
    arestavo
    CLASSIFIED ULTRA Member
    • Total Posts : 6803
    • Reward points : 0
    • Joined: 2008/02/06 06:58:57
    • Location: Through the Scary Door
    • Status: offline
    • Ribbons : 77
    Re: 3090 FTW3 ULTRA Serial Numbers 2021/07/26 10:03:47 (permalink)
    Serial numbers aren't part of the fix, a new voltage controller on the 1.0 revision of the 3090 FTW3 is (0.1 rev is the original).
     
    EVGA_Jacob's posts on the special RMA program for the 3090 FTW3 power imbalance problem are consolidated in post #2 of this thread: https://forums.evga.com/EVGA-GeForce-RTX-3090-FTW3-XOC-BIOS-m3124192.aspx
     
    post edited by arestavo - 2021/07/26 10:05:05
    #2
    ZachTullier2
    New Member
    • Total Posts : 28
    • Reward points : 0
    • Joined: 2021/06/01 18:27:23
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 ULTRA Serial Numbers 2021/07/26 10:36:24 (permalink)
    arestavo
    Serial numbers aren't part of the fix, a new voltage controller on the 1.0 revision of the 3090 FTW3 is (0.1 rev is the original).
     


    Where do you check to see if you have 0.1 revision or the 1.0 revision?
    #3
    arestavo
    CLASSIFIED ULTRA Member
    • Total Posts : 6803
    • Reward points : 0
    • Joined: 2008/02/06 06:58:57
    • Location: Through the Scary Door
    • Status: offline
    • Ribbons : 77
    Re: 3090 FTW3 ULTRA Serial Numbers 2021/07/26 11:09:45 (permalink)
    ZachTullier2
    arestavo
    Serial numbers aren't part of the fix, a new voltage controller on the 1.0 revision of the 3090 FTW3 is (0.1 rev is the original).
     


    Where do you check to see if you have 0.1 revision or the 1.0 revision?

    It should be near the PCIE fingers on the card.
    #4
    jaredbyoung
    iCX Member
    • Total Posts : 465
    • Reward points : 0
    • Joined: 2020/10/15 16:42:59
    • Status: offline
    • Ribbons : 1
    Re: 3090 FTW3 ULTRA Serial Numbers 2021/07/26 11:17:12 (permalink)
    arestavo
    Serial numbers aren't part of the fix, a new voltage controller on the 1.0 revision of the 3090 FTW3 is (0.1 rev is the original).
     
    EVGA_Jacob's posts on the special RMA program for the 3090 FTW3 power imbalance problem are consolidated in post #2 of this thread: https://forums.evga.com/EVGA-GeForce-RTX-3090-FTW3-XOC-BIOS-m3124192.aspx
     


    Usually you can use serial numbers to cross reference things like this. Like REV 1.0 started with serial number X and later. I can check my S/N without removing my card.
    #5
    arestavo
    CLASSIFIED ULTRA Member
    • Total Posts : 6803
    • Reward points : 0
    • Joined: 2008/02/06 06:58:57
    • Location: Through the Scary Door
    • Status: offline
    • Ribbons : 77
    Re: 3090 FTW3 ULTRA Serial Numbers 2021/07/26 11:45:01 (permalink)
    jaredbyoung
    arestavo
    Serial numbers aren't part of the fix, a new voltage controller on the 1.0 revision of the 3090 FTW3 is (0.1 rev is the original).
     
    EVGA_Jacob's posts on the special RMA program for the 3090 FTW3 power imbalance problem are consolidated in post #2 of this thread: https://forums.evga.com/EVGA-GeForce-RTX-3090-FTW3-XOC-BIOS-m3124192.aspx
     


    Usually you can use serial numbers to cross reference things like this. Like REV 1.0 started with serial number X and later. I can check my S/N without removing my card.


    EVGA doesn't give out serial numbers (and you shouldn't post yours), but you can always call and ask if you don't want to take the card out and look at it: https://www.evga.com/about/contactus/ 
    #6
    RogueMaster
    iCX Member
    • Total Posts : 403
    • Reward points : 0
    • Joined: 2007/03/19 20:15:42
    • Status: offline
    • Ribbons : 2
    Re: 3090 FTW3 ULTRA Serial Numbers 2021/07/27 14:30:07 (permalink)
    arestavo
    Serial numbers aren't part of the fix, a new voltage controller on the 1.0 revision of the 3090 FTW3 is (0.1 rev is the original).
     
    EVGA_Jacob's posts on the special RMA program for the 3090 FTW3 power imbalance problem are consolidated in post #2 of this thread: https://forums.evga.com/EVGA-GeForce-RTX-3090-FTW3-XOC-BIOS-m3124192.aspx
     



    So if I'm reading this correctly, I simply send an email to the 3090oc address, and get my Rev 0.1 card replaced? It doesn't have to be dead to do so?


    #7
    phroze
    SSC Member
    • Total Posts : 799
    • Reward points : 0
    • Joined: 2018/09/17 20:09:17
    • Location: WA State
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 ULTRA Serial Numbers 2021/07/27 15:28:08 (permalink)
    RogueMaster
    arestavo
    Serial numbers aren't part of the fix, a new voltage controller on the 1.0 revision of the 3090 FTW3 is (0.1 rev is the original).
     
    EVGA_Jacob's posts on the special RMA program for the 3090 FTW3 power imbalance problem are consolidated in post #2 of this thread: https://forums.evga.com/EVGA-GeForce-RTX-3090-FTW3-XOC-BIOS-m3124192.aspx
     



    So if I'm reading this correctly, I simply send an email to the 3090oc address, and get my Rev 0.1 card replaced? It doesn't have to be dead to do so?


    Send them a screenshot of gpuz in the sensor tabs showing the off balance and high usage of the pcie slot power while running a benchmark such as port royal.

    Case: Lian Li O11 Dynamic XL
    Mobo: Asrock X570 Taichi
    CPU: Ryzen 5900x
    GPU: EVGA RTX 3090 FTW3 Ultra
    RAM: Crucial Ballistix OC to 3800 16 18 18 1:1
    PSU: EVGA SuperNova G2 1600w
    Cooling: Custom hardline loop: optimus blocks, primochill stuff, lian li stuff, HW Labs 60mm radiators, custom stuff
    #8
    RogueMaster
    iCX Member
    • Total Posts : 403
    • Reward points : 0
    • Joined: 2007/03/19 20:15:42
    • Status: offline
    • Ribbons : 2
    Re: 3090 FTW3 ULTRA Serial Numbers 2021/07/28 15:38:51 (permalink)
    Looks like mine may be one of the ones with the bad controller. 76.2w showing on the PCIE power 12v. Add in the ~8w for the 3v, and it's pushing 84w.  Am I understanding that correctly?



    Attached Image(s)



    #9
    Jediexpress
    Superclocked Member
    • Total Posts : 146
    • Reward points : 0
    • Joined: 2010/08/30 14:07:26
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 ULTRA Serial Numbers 2021/08/02 23:29:53 (permalink)
    I have a 3090 ftw3 ultra rev: 0.1 card. I'm trying to understand the issue with the voltage controller. Is it pulling to much power from the pcie slot? Does it need to be in the OC bios?

    Case Labs TH10, Rampage IV Extreme, Core i7 4930k @ 4.6ghz, 16gb Corsair Dominator GT @2133, 2x GTX 780Ti SC 3gb, Sound Blaster Zx, Corsair AX1200, Aquaero 5 Pro
     
    Custom water cooling, dual loop, all acrylic tubing.
    #10
    Jump to:
  • Back to Mobile