nobuo780
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 12/4/2018
- Status: offline
- Ribbons : 0
Wednesday, September 02, 2020 7:58 PM
(permalink)
I know I am crazy for asking, but are there any blower designs for any of these models 3070, 3080, 3090?
Just asking for the SFF crowd. = )
|
Airikay
Superclocked Member
- Total Posts : 235
- Reward points : 0
- Joined: 8/21/2020
- Status: offline
- Ribbons : 1
Re: 3070, 3080, 3090 BLOWER designs?
Wednesday, September 02, 2020 8:45 PM
(permalink)
Think the XC3 will be good for SFF crowd. It is only 285.37mm x 111.15mm x 45.1mm (40.9mm with backplate removed). I guess it depends on what your card is exactly, but that should fit in a lot of different SFF cases like Ncase.
|
Revenant_Knight
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 10/12/2013
- Status: offline
- Ribbons : 0
Re: 3070, 3080, 3090 BLOWER designs?
Thursday, September 03, 2020 1:53 AM
(permalink)
Airikay
Think the XC3 will be good for SFF crowd. It is only 285.37mm x 111.15mm x 45.1mm (40.9mm with backplate removed). I guess it depends on what your card is exactly, but that should fit in a lot of different SFF cases like Ncase.
Should work in the NCASE, Dan A4SFX, but not the Cerberus X with a front mount radiator (I have all three of them). That's limited to roughly 265mm or the same length as a founders edition 2080. NCASE benefits quite a bit from a blower style card due to it's limited exhaust and traditional layout. Same with Cerberus. I would happily buy a 3 slot blower card for either the Cerberus or NCASE. The bigger issue is that at 220 watts, the 3070 is probably not going to make it to true SFF ITX form like the MSI Aero ITX cards.
|
Revenant_Knight
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 10/12/2013
- Status: offline
- Ribbons : 0
Re: 3070, 3080, 3090 BLOWER designs?
Thursday, September 03, 2020 1:57 AM
(permalink)
nobuo780
I know I am crazy for asking, but are there any blower designs for any of these models 3070, 3080, 3090?
Just asking for the SFF crowd. = )
You're not crazy for asking... Blower cards are often under rated because on open test benches they can't perform as well as axiel models. Put them where they are at home, in a tight case with limited airflow, and they excel. I had a 980ti blower and a 2080 FE axiel in an NCASE M1. With all the panels off, the 2080 FE was quiet and worked great. Put the panels on, and it sounded like a jet engine and quickly overheated. The blower 980ti was actually substantially quieter and happily overclocked to 1.4GHZ in the same case.
|
Airikay
Superclocked Member
- Total Posts : 235
- Reward points : 0
- Joined: 8/21/2020
- Status: offline
- Ribbons : 1
Re: 3070, 3080, 3090 BLOWER designs?
Thursday, September 03, 2020 3:51 AM
(permalink)
Revenant_Knight
Airikay
Think the XC3 will be good for SFF crowd. It is only 285.37mm x 111.15mm x 45.1mm (40.9mm with backplate removed). I guess it depends on what your card is exactly, but that should fit in a lot of different SFF cases like Ncase.
Should work in the NCASE, Dan A4SFX, but not the Cerberus X with a front mount radiator (I have all three of them). That's limited to roughly 265mm or the same length as a founders edition 2080. NCASE benefits quite a bit from a blower style card due to it's limited exhaust and traditional layout. Same with Cerberus. I would happily buy a 3 slot blower card for either the Cerberus or NCASE.
The bigger issue is that at 220 watts, the 3070 is probably not going to make it to true SFF ITX form like the MSI Aero ITX cards.
Not sure if you've ever seen this but M1AF over from reddit made this and found the best is a deshrouded GPU with fans exhausting out the bottom for Ncase. If you search him on reddit he has a lot of good info relating to Ncase. https://docs.google.com/s...14/edit#gid=1019066897
|
Revenant_Knight
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 10/12/2013
- Status: offline
- Ribbons : 0
Re: 3070, 3080, 3090 BLOWER designs?
Thursday, September 03, 2020 4:03 AM
(permalink)
Airikay
Revenant_Knight
Airikay
Think the XC3 will be good for SFF crowd. It is only 285.37mm x 111.15mm x 45.1mm (40.9mm with backplate removed). I guess it depends on what your card is exactly, but that should fit in a lot of different SFF cases like Ncase.
Should work in the NCASE, Dan A4SFX, but not the Cerberus X with a front mount radiator (I have all three of them). That's limited to roughly 265mm or the same length as a founders edition 2080. NCASE benefits quite a bit from a blower style card due to it's limited exhaust and traditional layout. Same with Cerberus. I would happily buy a 3 slot blower card for either the Cerberus or NCASE.
The bigger issue is that at 220 watts, the 3070 is probably not going to make it to true SFF ITX form like the MSI Aero ITX cards.
Not sure if you've ever seen this but M1AF over from reddit made this and found the best is a deshrouded GPU with fans exhausting out the bottom for Ncase. If you search him on reddit he has a lot of good info relating to Ncase.
I actually replicated this but couldn't replicate his results. My CPU AIO was starved for air and would overheat, killing my overclock. I didn't want to delid, so I swapped to a blower. But it's good info.Thank you for posting it.
post edited by Revenant_Knight - Thursday, September 03, 2020 4:06 AM
|
Nereus
Captain Goodvibes
- Total Posts : 18192
- Reward points : 0
- Joined: 4/10/2009
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: 3070, 3080, 3090 BLOWER designs?
Tuesday, September 15, 2020 2:50 AM
(permalink)
Same question. I've been looking for a blower style to upgrade my Mrs' mini-ITX build, ideally a 3070. Having hot air emptying into that Corsair 250D mini-ITX case would turn it into an oven, particularly with an AiO 120mm rad sitting on the front intake. Currently still using a 980Ti in there and it works well (no overheating), but it's due for an upgrade. The 20xx series had a few blower cards, so I'm hoping the same for the 30XX series - most likely the 3070 cards. Ironically a new 2070 Super is currently more expensive than a new 3070 (assuming the suggested retail price of $499), I'm hoping that disparity will change once the 30XX cards come out officially...
|
nobuo780
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 12/4/2018
- Status: offline
- Ribbons : 0
Re: 3070, 3080, 3090 BLOWER designs?
Tuesday, September 15, 2020 4:59 AM
(permalink)
Hey evga, any blowers for 30 series like you did for 20 series?
|
Nereus
Captain Goodvibes
- Total Posts : 18192
- Reward points : 0
- Joined: 4/10/2009
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: 3070, 3080, 3090 BLOWER designs?
Tuesday, September 15, 2020 5:05 AM
(permalink)
nobuo780
Hey evga, any blowers for 30 series like you did for 20 series?
Not according to this page (unless you count an AiO as a blower style, lol).
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 85038
- Reward points : 0
- Joined: 10/5/2004
- Location: Netherlands
- Status: offline
- Ribbons : 86
Re: 3070, 3080, 3090 BLOWER designs?
Tuesday, September 15, 2020 6:13 AM
(permalink)
NVIDIA completely redesigned their Founder's Edition card with two fans. The blower style of card is loud and inefficient. Personally I'm glad this type of design is going away.
|
nobuo780
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 12/4/2018
- Status: offline
- Ribbons : 0
Re: 3070, 3080, 3090 BLOWER designs?
Tuesday, September 15, 2020 7:51 PM
(permalink)
Just saying the SFF builders sometimes need/want blower GPU cards. Hey, DIY, could i make my own blower? That would be an epic build!
|
Nereus
Captain Goodvibes
- Total Posts : 18192
- Reward points : 0
- Joined: 4/10/2009
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: 3070, 3080, 3090 BLOWER designs?
Tuesday, September 15, 2020 8:46 PM
(permalink)
nobuo780
Just saying the SFF builders sometimes need/want blower GPU cards. Hey, DIY, could i make my own blower? That would be an epic build!
DIY blower :) Years ago I started planning a build inside a mini-fridge with flexible ducting hose for blower exhaust etc., never came to fruition though.
|
Nereus
Captain Goodvibes
- Total Posts : 18192
- Reward points : 0
- Joined: 4/10/2009
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: 3070, 3080, 3090 BLOWER designs?
Tuesday, September 15, 2020 8:49 PM
(permalink)
rjohnson11
NVIDIA completely redesigned their Founder's Edition card with two fans. The blower style of card is loud and inefficient. Personally I'm glad this type of design is going away.
I'd be quite happy with 2 fans on the mini-ITX build GPU if the air was still exhausted out the back of the case only, but they aren't designed that way. I guess some duct tape could solve that, but it would screw up the air flow in the GPU for the intended cooling, so nope.
|
EVGA_Lee
Moderator
- Total Posts : 4243
- Reward points : 0
- Joined: 11/4/2016
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: 3070, 3080, 3090 BLOWER designs?
Tuesday, September 15, 2020 8:50 PM
(permalink)
No plans to offer blower models at this time. It's possible that may change in the future, but as of today, no plans.
|
TheDoctorCMG
iCX Member
- Total Posts : 345
- Reward points : 0
- Joined: 4/3/2009
- Status: offline
- Ribbons : 2
Re: 3070, 3080, 3090 BLOWER designs?
Tuesday, September 15, 2020 8:53 PM
(permalink)
Maybe EVGA won't do it, but I have heard rumors of other brands working on a blower design. A surprising amount of AIBs made good quality blowers for the 2080ti, and while loud, do serve their purpose in the right scenario. Obviously it might just be one variant at stock clockspeeds and the OC is up to the end user to attempt.
CPU: I7 7820x @ 4.7ghz Mobo: Gigabyte Gaming 7 Pro x299 Mem: Corsair Vengeance LP 3000mhz PSU: EVGA 850 Supernova G3 GPU: FE Nvidia RTX 3090 Case: Corsair 5000d Airflow CPU Cooler: EKWB AIO 360 Elite
|
Nereus
Captain Goodvibes
- Total Posts : 18192
- Reward points : 0
- Joined: 4/10/2009
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: 3070, 3080, 3090 BLOWER designs?
Tuesday, September 15, 2020 8:53 PM
(permalink)
EVGATech_LeeM
No plans to offer blower models at this time. It's possible that may change in the future, but as of today, no plans.
Yup kinda figured as much with the high TDP on the 30XX cards - a blower fan probably wouldn't cut it... maybe on a stock clock 3070 or a 3060 if one comes out...
|
nobuo780
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 12/4/2018
- Status: offline
- Ribbons : 0
Re: 3070, 3080, 3090 BLOWER designs?
Wednesday, September 16, 2020 3:58 AM
(permalink)
Yeah cross your fingers for a 3080/70 blower!
|
z999z3mystorys
CLASSIFIED Member
- Total Posts : 3910
- Reward points : 0
- Joined: 11/29/2008
- Location: at my current location
- Status: offline
- Ribbons : 23
Re: 3070, 3080, 3090 BLOWER designs?
Wednesday, September 16, 2020 4:15 AM
(permalink)
the FE/Nvidia design has a semi-blower cooler, where one fan acts as a blower, and the other doesn't. I do wonder how big it would be needed for a pure blower cooler, if you enlarged it to the size of the 3090 cooler, I could see it working, though I can't say how well/loud it would be. SO I think the semi-blower would be the best option for a case with semi-limited airflow (barring more advanced options like hybrid/water cooling.
Given the power draw on the 3070, it should be doable on that card at least.
|
Nereus
Captain Goodvibes
- Total Posts : 18192
- Reward points : 0
- Joined: 4/10/2009
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: 3070, 3080, 3090 BLOWER designs?
Wednesday, September 16, 2020 9:55 PM
(permalink)
Just ordered the RTX-2070 Super Gaming 08G-P4-3070-RX (with blower) for my Mrs' mini-ITX build. EVGA dropped the price on the B-Stock one down to $399 so I decided that was worth it for an upgrade from a 980Ti - about 50% performance upgrade, and as a bonus it's compatible with the features in NVidia Broadcast when that comes out some time this month. No need to buy a green screen now (which she was about to do). I was going to rebuild her entire rig, but the i7-7700k in there is still a pretty solid CPU, not that much of a gain going to an i7-10700k other than more cores, and she doesn't really need it.. plus the 10700 runs significantly hotter - 91W vs 125W, and more heat is definitely not welcome in a mini-ITX build. Might be a small hit on the GPU performance with the 7700 vs 10700 CPU, but certainly nowhere near the gain moving from 980Ti to 2070Super. I'll take a look at the Zen 3 Ryzen 4000 chips when they come out in October and maybe consider rebuilding then.
post edited by Nereus - Wednesday, September 16, 2020 10:05 PM
|
Hoggle
EVGA Forum Moderator
- Total Posts : 8899
- Reward points : 0
- Joined: 10/14/2003
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: 3070, 3080, 3090 BLOWER designs?
Wednesday, September 16, 2020 10:39 PM
(permalink)
I think if they say no plans today it probably would take months before we would see one if they decided to do one.
|
nobuo780
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 12/4/2018
- Status: offline
- Ribbons : 0
Re: 3070, 3080, 3090 BLOWER designs?
Saturday, September 19, 2020 2:48 PM
(permalink)
|
Spurious_ECG
Superclocked Member
- Total Posts : 192
- Reward points : 0
- Joined: 7/24/2020
- Location: Canada
- Status: offline
- Ribbons : 0
Re: 3070, 3080, 3090 BLOWER designs?
Saturday, September 19, 2020 4:17 PM
(permalink)
Here I was thinking nobody will miss blowers, because most of the time... they blow :D
Aren't SFF cases becoming more cooling friendly with airflow, water-cooling support, and GPU compatibility? Level1Techs have done good overviews of them.
|
nobuo780
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 12/4/2018
- Status: offline
- Ribbons : 0
Re: 3070, 3080, 3090 BLOWER designs?
Sunday, September 20, 2020 9:35 PM
(permalink)
Asus announced turbo blower 30s as well. They had some for 20 series. Evga had 20 blowers. There is a market for them evga!
|
larrysb
New Member
- Total Posts : 94
- Reward points : 0
- Joined: 2/5/2007
- Status: offline
- Ribbons : 1
Re: 3070, 3080, 3090 BLOWER designs?
Monday, September 21, 2020 7:43 AM
(permalink)
Blowers are also good for workstation users who need to densely pack cards together. A lot of pro-level workstation motherboards are two-slot spaced for the GPU slots.
I think it will be interesting to see the Ampere cards for the Quadro line.
|
jmehalik
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 9/21/2020
- Status: offline
- Ribbons : 0
Re: 3070, 3080, 3090 BLOWER designs?
Saturday, September 26, 2020 5:06 PM
(permalink)
I think i saw one get hinted at, but the closest is the fe
|
chosn1
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2/28/2007
- Status: offline
- Ribbons : 0
Re: 3070, 3080, 3090 BLOWER designs?
Sunday, September 27, 2020 1:28 AM
(permalink)
|
nobuo780
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 12/4/2018
- Status: offline
- Ribbons : 0
Re: 3070, 3080, 3090 BLOWER designs?
Wednesday, September 30, 2020 8:33 PM
(permalink)
one can just downlock or lower the TDP on these blowers and they would perform pretty decent! You have 1 buyer EVGA if you release a cool looking model; blower for 3080 makes more sense than 3090.
|
ty_ger07
Insert Custom Title Here
- Total Posts : 16602
- Reward points : 0
- Joined: 4/11/2008
- Location: traveler
- Status: offline
- Ribbons : 271
Re: 3070, 3080, 3090 BLOWER designs?
Wednesday, September 30, 2020 8:55 PM
(permalink)
ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
|
Catalina588
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 7/5/2010
- Status: offline
- Ribbons : 0
Re: 3070, 3080, 3090 BLOWER designs?
Wednesday, November 04, 2020 7:53 PM
(permalink)
Gigabyte has blower versions of RTX 3080 and 3090.
|
nobuo780
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 12/4/2018
- Status: offline
- Ribbons : 0
Re: 3070, 3080, 3090 BLOWER designs?
Friday, July 02, 2021 8:36 PM
(permalink)
|