EVGA

AnsweredHome-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please

Page: 12 > Showing page 1 of 2
Author
Robbanswe
iCX Member
  • Total Posts : 338
  • Reward points : 0
  • Joined: 2011/09/18 00:19:28
  • Status: offline
  • Ribbons : 4
2013/11/05 08:53:20 (permalink)
Spec:
2100 watt\powersupply
21gb ram
6x PCIE extenders.
6xGTX580
Big Watercooling system.
It run smoth and very fast with 3 of GTX580,  but if i put in 4-5-6 cards it wont work :-(
Bios read 6 card,,,  but Win 7-64 dont install them.
done Clean Install win7\64  on several drives, no diff.
Fast as hell with 3x580.
Start up slow as a turtle with 4 or more cards.
A Little Pictures of my SR-2 build :-)
 
 

Attached Image(s)


2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5 
 
 
 
 
 
 
 
#1
Gadgety1
Superclocked Member
  • Total Posts : 101
  • Reward points : 0
  • Joined: 2012/11/15 05:02:22
  • Status: offline
  • Ribbons : 0
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/05 13:45:45 (permalink)
I like your homebuilt chassis. I can't help you with the 4+ GTX580s because I haven't got the experience. There are others out there who do, so hopefully you'll get some assistance.
#2
superzanti
New Member
  • Total Posts : 14
  • Reward points : 0
  • Joined: 2011/10/10 12:36:31
  • Status: offline
  • Ribbons : 0
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/05 17:02:47 (permalink)
I could be wrong, but I belive the graphics cards have to be plugged into the x16 pcie slots. Unfortunatley there are only 4 of these.
#3
bcavnaugh
The Crunchinator
  • Total Posts : 38977
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/05 19:38:21 (permalink)
Nice Rig! +1 if you had a MODS RIGS Rig.
I came close to getting one today for Folding but held back, waiting for the GTX 790's to come out.
I take as soon as you add the 4th Card it will not show up in Windows?
I added a 3rd GTX 690 and ended up having to install the driver 2 times to get the 5th & 6th GPUs to show up.
post edited by bcavnaugh - 2013/11/05 19:40:38

Associate Code: 9E88QK5L7811G3H


 
#4
Robbanswe
iCX Member
  • Total Posts : 338
  • Reward points : 0
  • Joined: 2011/09/18 00:19:28
  • Status: offline
  • Ribbons : 4
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/06 01:01:41 (permalink)
It work perfect now with 5 cards.
Bluescreen when render with 6 card,,,it shows up in windows :-)
Probably  testing one trillion diffrent bios settings to fix it   

Attached Image(s)


2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5 
 
 
 
 
 
 
 
#5
Robbanswe
iCX Member
  • Total Posts : 338
  • Reward points : 0
  • Joined: 2011/09/18 00:19:28
  • Status: offline
  • Ribbons : 4
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/06 01:14:52 (permalink)
It works now with 6 cards
Put up the bios settings on forum for 6xGTX580 after work tonight

Attached Image(s)


2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5 
 
 
 
 
 
 
 
#6
bcavnaugh
The Crunchinator
  • Total Posts : 38977
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/06 06:06:33 (permalink)
Nice.... I did have increase my vCore I do remember getting a 124 or 101 BSOD as well.
Also some where on this Forum they talked about the VTT voltage but I could not find that Post.
Can't wait to see your Benchmark Scores!!!! 

Associate Code: 9E88QK5L7811G3H


 
#7
Robbanswe
iCX Member
  • Total Posts : 338
  • Reward points : 0
  • Joined: 2011/09/18 00:19:28
  • Status: offline
  • Ribbons : 4
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/07 10:53:03 (permalink)
6XGTX580 WORKING
TESTING 7XGTX580
 

Attached Image(s)


2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5 
 
 
 
 
 
 
 
#8
Code Dynamics
New Member
  • Total Posts : 76
  • Reward points : 0
  • Joined: 2013/10/26 10:57:46
  • Location: Austria
  • Status: offline
  • Ribbons : 0
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/08 10:35:41 (permalink)
Great Build - it was much work i assume to make this - ! :)

Mainboard: Evga SR-2 (Bios A54)
CPU: 2xIntel Xeon X5660
Cooling: 2 x Scythe Mugen 4 Heatsinks
Ram: 6 x 4GB G.Skill Ripjaws 1600Mhz (Tripple)
Graphics: 4 x Evga 295GTX Coop (8 GPU)!
PSU: Lepa 1600 Watt PSU
Case: Aerocool Strike X ST Black
Cool:Air=12xScythe Slipstream Slim2000rpm,..
Win7 64Bit
#9
Code Dynamics
New Member
  • Total Posts : 76
  • Reward points : 0
  • Joined: 2013/10/26 10:57:46
  • Location: Austria
  • Status: offline
  • Ribbons : 0
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/08 10:44:54 (permalink) ☼ Best Answerby Robbanswe 2013/11/08 11:23:40
One question ? did you used the 6pin connector next to the 8 pin connector ? for multi gpu its really needed ?

Mainboard: Evga SR-2 (Bios A54)
CPU: 2xIntel Xeon X5660
Cooling: 2 x Scythe Mugen 4 Heatsinks
Ram: 6 x 4GB G.Skill Ripjaws 1600Mhz (Tripple)
Graphics: 4 x Evga 295GTX Coop (8 GPU)!
PSU: Lepa 1600 Watt PSU
Case: Aerocool Strike X ST Black
Cool:Air=12xScythe Slipstream Slim2000rpm,..
Win7 64Bit
#10
Robbanswe
iCX Member
  • Total Posts : 338
  • Reward points : 0
  • Joined: 2011/09/18 00:19:28
  • Status: offline
  • Ribbons : 4
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/08 11:23:09 (permalink)
Yes :)
Every part a build myself, first in brain\3dstudio  then using steel or aluminium
very hard to build so small for so meny graphiccards,,but fun 
I got a  lot of  good stuff in garage,,machines
a love to build things for speed. and of course use them
got over 20 peltierelements  in garage  for cooling stuff  so my next Project is a tight Little megapowerful cooling machine for my SR-2,,, when my sr2 work perfect for rendering of course  
 
 

2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5 
 
 
 
 
 
 
 
#11
Robbanswe
iCX Member
  • Total Posts : 338
  • Reward points : 0
  • Joined: 2011/09/18 00:19:28
  • Status: offline
  • Ribbons : 4
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/08 11:25:32 (permalink)
 
do i have to use both 6pin beside cpu 1 and 2 ?
6 GTX580 work now, but not 7.
 
using 3 powersupply near 3000watt.
 
rendering bench result with 6x580: really good !!!
 
 
post edited by Robbanswe - 2013/11/08 11:42:37

Attached Image(s)


2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5 
 
 
 
 
 
 
 
#12
TheWolf
CLASSIFIED Member
  • Total Posts : 3800
  • Reward points : 0
  • Joined: 2007/11/14 16:05:23
  • Location: Moss Point, Ms
  • Status: offline
  • Ribbons : 9
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/08 12:13:41 (permalink)
With that much drawing power I would say yes for best results.

EVGA Affiliate Code ZHKWRJB9D4 My HeatWare 
 
#13
Robbanswe
iCX Member
  • Total Posts : 338
  • Reward points : 0
  • Joined: 2011/09/18 00:19:28
  • Status: offline
  • Ribbons : 4
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/09 03:27:03 (permalink)
Ok i fix power to both 6pins tomorrow.
Probably lack of IRQ and adresses too. For 7x580.
Testing the sr-2 with 7 card hole next week after job.
If it dont work i stick to 6 card :-)

2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5 
 
 
 
 
 
 
 
#14
eduncan911
SSC Member
  • Total Posts : 805
  • Reward points : 0
  • Joined: 2010/11/26 10:31:52
  • Status: offline
  • Ribbons : 8
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/09 06:27:48 (permalink)
Don't install the Audio nor 3D Vision drivers.  The audio alone will save you IRQ assignments.

-=[ MODSRIGS :: FOR-SALE :: HEAT :: EBAY :: EVGA AFFILIATE CODE - HUVCIK9P42 :: TING ]=-

Dell XPS 730X Modified H2C Hybrid TEC Chassis

:: Asrock Tachi X399, 2950x, 64 GB ECC @ 2667
:: 2x AMD VEGA 64 Reference
:: 3x 24" 120 Hz for 3D Vision Surround (6000x1080 @ 120 Hz)

Thinkpad P1 Gen1
:: Xeon E-2176M, 32 GB ECC @ 2667, 9 Hrs w/4K, tri-monitor 5760x1080

100% AMD and Linux household with 10 Gbps to laptop and desktops

#15
Robbanswe
iCX Member
  • Total Posts : 338
  • Reward points : 0
  • Joined: 2011/09/18 00:19:28
  • Status: offline
  • Ribbons : 4
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/09 12:05:55 (permalink)
How can i skip the nvidia audio driver it installs auto in win7 ?
inactivate the Cards ?

Totally insane with 30 audiocards :-)

2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5 
 
 
 
 
 
 
 
#16
pgforce
New Member
  • Total Posts : 27
  • Reward points : 0
  • Joined: 2012/12/02 13:49:22
  • Status: offline
  • Ribbons : 0
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/09 18:33:15 (permalink)
That is truly amazing...
 
bcavnaugh - Do you note a performance difference adding a third GTX 690??...this is something I was thinking about doing...I added a GTX 670 (same CUDA compute level) but it wouldn't play nice with the two GTX 690s....
#17
TheWolf
CLASSIFIED Member
  • Total Posts : 3800
  • Reward points : 0
  • Joined: 2007/11/14 16:05:23
  • Location: Moss Point, Ms
  • Status: offline
  • Ribbons : 9
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/09 18:42:18 (permalink)
Robbanswe
How can i skip the nvidia audio driver it installs auto in win7 ?
inactivate the Cards ?

Totally insane with 30 audiocards :-)

Remove them from Programs and Features or device manger. Under device manger on the uninstall popup there a place to tell it to also remove the drivers.
When doing a Nvidia driver install always choose custom install after it starts.
By doing this you can choose all or just the parts you wish to install instead of everything.

EVGA Affiliate Code ZHKWRJB9D4 My HeatWare 
 
#18
Robbanswe
iCX Member
  • Total Posts : 338
  • Reward points : 0
  • Joined: 2011/09/18 00:19:28
  • Status: offline
  • Ribbons : 4
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/10 04:17:26 (permalink)
The problem was the pcie standard bus speed 100mhz.
I put PCIE-bus down to 90mhz and it work 100% on 7xGTX580.
Overclocked the cpus to 4140mhz.
Tested 99,98,97,96,95,94,93,92,91mhz  and magic happens with 90mhz busspeed 
check test results ,,it is insane fast
Got a Little tweeking left to do for cpu and memorys
 

Attached Image(s)


2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5 
 
 
 
 
 
 
 
#19
Code Dynamics
New Member
  • Total Posts : 76
  • Reward points : 0
  • Joined: 2013/10/26 10:57:46
  • Location: Austria
  • Status: offline
  • Ribbons : 0
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/10 12:07:48 (permalink)
 
Fu..in Awesome Build

Mainboard: Evga SR-2 (Bios A54)
CPU: 2xIntel Xeon X5660
Cooling: 2 x Scythe Mugen 4 Heatsinks
Ram: 6 x 4GB G.Skill Ripjaws 1600Mhz (Tripple)
Graphics: 4 x Evga 295GTX Coop (8 GPU)!
PSU: Lepa 1600 Watt PSU
Case: Aerocool Strike X ST Black
Cool:Air=12xScythe Slipstream Slim2000rpm,..
Win7 64Bit
#20
Robbanswe
iCX Member
  • Total Posts : 338
  • Reward points : 0
  • Joined: 2011/09/18 00:19:28
  • Status: offline
  • Ribbons : 4
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/10 13:33:55 (permalink)
Thanks Code D !
God damit it is spectacular fast
Faster than a pc with 3x680+ 3xTitan+1xTesla+1x580 =7 brutal graphiccards
 
I only got a Little problem to start up the SR-2 when it is Power-off some hours.
3 restarts then on to windows.
Probably the low busspeed  

2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5 
 
 
 
 
 
 
 
#21
eduncan911
SSC Member
  • Total Posts : 805
  • Reward points : 0
  • Joined: 2010/11/26 10:31:52
  • Status: offline
  • Ribbons : 8
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/10 13:40:16 (permalink)
Robbanswe
How can i skip the nvidia audio driver it installs auto in win7 ?
inactivate the Cards ?

Totally insane with 30 audiocards :-)

TheWolf
Robbanswe
How can i skip the nvidia audio driver it installs auto in win7 ?
inactivate the Cards ?

Totally insane with 30 audiocards :-)

Remove them from Programs and Features or device manger. Under device manger on the uninstall popup there a place to tell it to also remove the drivers.
When doing a Nvidia driver install always choose custom install after it starts.
By doing this you can choose all or just the parts you wish to install instead of everything.





To elaborate on what TheWolf said:
 
The Issue
The HDMI HD Audio drivers (and other drivers) are installed via the Nvidia drivers when you installed it under the "Express" install (along with the useless GeForce Experience for those of us with tri-monitors).  
 
The Resolution
I know this is painful, but, here's what I'd recommend you need to do:
 
1) Re-Install the Nvidia GeForce drivers you are using.  During the re-install, it will ask you to do either an Express or Custom (Advanced) install.  Select Custom (advance) install!
 
2) On the next screen, uncheck everything except the Graphics Driver.  You don't need anything else, nada, zip, no way!
 
3) Make sure to check the "Perform a Clean Installation"
 
4) Click NEXT and continue installing.
 
A note of caution though: don't be affraid at the driver and system freaking out.  A "Clean" installation removes the old drivers and if anything is in use, it will ask you to reboot BEFORE installing the driver again.  If not, it will just flash the screen very often.
 
Reboot when you are done.
 
TheWolf's solution may work just fine by uninstalling them.  I just know I'd remove all traces of the drivers, per my steps above, so it doesn't try to re-install itself later.

-=[ MODSRIGS :: FOR-SALE :: HEAT :: EBAY :: EVGA AFFILIATE CODE - HUVCIK9P42 :: TING ]=-

Dell XPS 730X Modified H2C Hybrid TEC Chassis

:: Asrock Tachi X399, 2950x, 64 GB ECC @ 2667
:: 2x AMD VEGA 64 Reference
:: 3x 24" 120 Hz for 3D Vision Surround (6000x1080 @ 120 Hz)

Thinkpad P1 Gen1
:: Xeon E-2176M, 32 GB ECC @ 2667, 9 Hrs w/4K, tri-monitor 5760x1080

100% AMD and Linux household with 10 Gbps to laptop and desktops

#22
Code Dynamics
New Member
  • Total Posts : 76
  • Reward points : 0
  • Joined: 2013/10/26 10:57:46
  • Location: Austria
  • Status: offline
  • Ribbons : 0
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/10 13:49:20 (permalink)
One Question btw...
Which bios do you use robbanswe ?
You have 7 cards working :D, i stuck with my 4th card (8 gpus total) gtx 295 god damnit :(

Mainboard: Evga SR-2 (Bios A54)
CPU: 2xIntel Xeon X5660
Cooling: 2 x Scythe Mugen 4 Heatsinks
Ram: 6 x 4GB G.Skill Ripjaws 1600Mhz (Tripple)
Graphics: 4 x Evga 295GTX Coop (8 GPU)!
PSU: Lepa 1600 Watt PSU
Case: Aerocool Strike X ST Black
Cool:Air=12xScythe Slipstream Slim2000rpm,..
Win7 64Bit
#23
TheWolf
CLASSIFIED Member
  • Total Posts : 3800
  • Reward points : 0
  • Joined: 2007/11/14 16:05:23
  • Location: Moss Point, Ms
  • Status: offline
  • Ribbons : 9
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/10 17:05:53 (permalink)
eduncan911
Robbanswe
How can i skip the nvidia audio driver it installs auto in win7 ?
inactivate the Cards ?

Totally insane with 30 audiocards :-)

TheWolf
Robbanswe
How can i skip the nvidia audio driver it installs auto in win7 ?
inactivate the Cards ?

Totally insane with 30 audiocards :-)

Remove them from Programs and Features or device manger. Under device manger on the uninstall popup there a place to tell it to also remove the drivers.
When doing a Nvidia driver install always choose custom install after it starts.
By doing this you can choose all or just the parts you wish to install instead of everything.





To elaborate on what TheWolf said:
 
The Issue
The HDMI HD Audio drivers (and other drivers) are installed via the Nvidia drivers when you installed it under the "Express" install (along with the useless GeForce Experience for those of us with tri-monitors).  
 
The Resolution
I know this is painful, but, here's what I'd recommend you need to do:
 
1) Re-Install the Nvidia GeForce drivers you are using.  During the re-install, it will ask you to do either an Express or Custom (Advanced) install.  Select Custom (advance) install!
 
2) On the next screen, uncheck everything except the Graphics Driver.  You don't need anything else, nada, zip, no way!
 
3) Make sure to check the "Perform a Clean Installation"
 
4) Click NEXT and continue installing.
 
A note of caution though: don't be affraid at the driver and system freaking out.  A "Clean" installation removes the old drivers and if anything is in use, it will ask you to reboot BEFORE installing the driver again.  If not, it will just flash the screen very often.
 
Reboot when you are done.
 
TheWolf's solution may work just fine by uninstalling them.  I just know I'd remove all traces of the drivers, per my steps above, so it doesn't try to re-install itself later.



They would also need to leave a check by PhysX System software if they
plain to do any gaming or rendering that needs PhysX.
PhysX is no longer install with just a driver install its a separate install for it now.
This way if you need to use a older version physx for some reason you could.

EVGA Affiliate Code ZHKWRJB9D4 My HeatWare 
 
#24
Robbanswe
iCX Member
  • Total Posts : 338
  • Reward points : 0
  • Joined: 2011/09/18 00:19:28
  • Status: offline
  • Ribbons : 4
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/11 00:30:18 (permalink)
I crashed the new 58 bios on nr:1
So i put swith to nr:2 and bios 50
So i run bios 50 right now !

2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5 
 
 
 
 
 
 
 
#25
Robbanswe
iCX Member
  • Total Posts : 338
  • Reward points : 0
  • Joined: 2011/09/18 00:19:28
  • Status: offline
  • Ribbons : 4
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/11 00:34:23 (permalink)
I try this after job , thanks edu and wolf !
I be back :-)

2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5 
 
 
 
 
 
 
 
#26
Robbanswe
iCX Member
  • Total Posts : 338
  • Reward points : 0
  • Joined: 2011/09/18 00:19:28
  • Status: offline
  • Ribbons : 4
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/11 01:25:40 (permalink)
Code D,,,I put up the bios settings after work.
Maby it can help u to run your gpus faster.
Robban

2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5 
 
 
 
 
 
 
 
#27
Code Dynamics
New Member
  • Total Posts : 76
  • Reward points : 0
  • Joined: 2013/10/26 10:57:46
  • Location: Austria
  • Status: offline
  • Ribbons : 0
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/11 02:03:12 (permalink)
That would be great robbanswe :), im messing up with gettin all cards recognized.
Because i have "8"gpus, maybe a bios update would it make it happen that all 4 Double GPU cards will work and let me boot up the pc.
@ the time i have 6 gpus aktive (3 cards), the 4 - dont let me pass with it booting up
 

Mainboard: Evga SR-2 (Bios A54)
CPU: 2xIntel Xeon X5660
Cooling: 2 x Scythe Mugen 4 Heatsinks
Ram: 6 x 4GB G.Skill Ripjaws 1600Mhz (Tripple)
Graphics: 4 x Evga 295GTX Coop (8 GPU)!
PSU: Lepa 1600 Watt PSU
Case: Aerocool Strike X ST Black
Cool:Air=12xScythe Slipstream Slim2000rpm,..
Win7 64Bit
#28
Robbanswe
iCX Member
  • Total Posts : 338
  • Reward points : 0
  • Joined: 2011/09/18 00:19:28
  • Status: offline
  • Ribbons : 4
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/11 05:30:57 (permalink)
I dont think that bios versions matter in this case.
Probably is bios 58 the best and got more
Oc settings than bios 50.
It is bios settings and irq adresses and other adresses that matter

2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5 
 
 
 
 
 
 
 
#29
Robbanswe
iCX Member
  • Total Posts : 338
  • Reward points : 0
  • Joined: 2011/09/18 00:19:28
  • Status: offline
  • Ribbons : 4
Re: Home-build a SR-2 with 6xGTX580 for rendering but it wont work ?,,need help please 2013/11/11 09:20:06 (permalink)
Hallo Code D !
This is my bios settings right now with 7xGTX580 Working
 
... More settings on next post.
Only upload 10 pics a post 
post edited by Robbanswe - 2013/11/11 09:24:45

Attached Image(s)


2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5 
 
 
 
 
 
 
 
#30
Page: 12 > Showing page 1 of 2
Jump to:
  • Back to Mobile