The.Imperial
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2014/02/21 03:25:56
- Status: offline
- Ribbons : 0
|
The.Imperial
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2014/02/21 03:25:56
- Status: offline
- Ribbons : 0
Re: Something is very wrong with my 1080 setup, need help
2016/06/01 16:08:10
(permalink)
|
bee144
iCX Member
- Total Posts : 345
- Reward points : 0
- Joined: 2009/07/29 19:01:37
- Location: Indianapolis, IN
- Status: offline
- Ribbons : 1
Re: Something is very wrong with my 1080 setup, need help
2016/06/01 16:12:52
(permalink)
put load on your gpu and see what PCIE speed it's running at. Should be running at 3.0 x16 if you have nothing else plugged into other PCIE slots.
|
The.Imperial
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2014/02/21 03:25:56
- Status: offline
- Ribbons : 0
Re: Something is very wrong with my 1080 setup, need help
2016/06/01 16:29:23
(permalink)
bee144 put load on your gpu and see what PCIE speed it's running at. Should be running at 3.0 x16 if you have nothing else plugged into other PCIE slots.
GPU-Z shows it running at PCI-E x16 v1.1. Shows up as 3.0 under load.
post edited by The.Imperial - 2016/06/01 16:32:49
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Something is very wrong with my 1080 setup, need help
2016/06/01 16:34:31
(permalink)
☼ Best Answerby The.Imperial 2016/06/01 17:07:29
Was that while it was Under load, or while it was at idle? Also, you should uninstall your drivers, and reinstall them. You are not showing Physx installed properly, and it should have a check mark next to it. When you install, do NOT install GEForce Experience. Do a "Custom Install" and only install the Driver and the PhysX. If you aren't using a 3D monitor, do not install the bloatware for it. Only install exactly what you need. GEForce experience is not something you need. Drivers come out once a month, and when they drop, someone usually posts in these forums that there is a new driver.
|
ragevirusqq
iCX Member
- Total Posts : 446
- Reward points : 0
- Joined: 2015/11/10 17:37:56
- Status: offline
- Ribbons : 3
Re: Something is very wrong with my 1080 setup, need help
2016/06/01 16:37:32
(permalink)
☄ Helpfulby The.Imperial 2016/06/01 17:07:46
I would do a clean install also and use DDU or reg edits to remove the traces of any previous card. (if there was one)
CaseLabs SM8 - X99 Classified - EVGA 1080ti - 5930k @ 4.5 - 32GB Hyper X predator - 480mm x2 and 360mm rads for super low fan speed and quiet operation- EK blocks and pump/res - All Bitspower black fittings - 1Tb samsung 850 evo 2tb total ssd space - EVGA 1300G2 - Predator X34 - Mayflower Objective 2 DAC/AMP - Beyerdynamic DT990 Pro - Sennheiser HD6xx - Mackie CR4 monitors
|
TECH_DaveB
EVGA Alumni
- Total Posts : 4893
- Reward points : 0
- Joined: 2008/09/26 17:03:47
- Status: offline
- Ribbons : 46
Re: Something is very wrong with my 1080 setup, need help
2016/06/01 16:43:00
(permalink)
☄ Helpfulby The.Imperial 2016/06/01 17:07:15
I would suggest following Sajin's guide. Easy step by step walk through.
|
The.Imperial
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2014/02/21 03:25:56
- Status: offline
- Ribbons : 0
Re: Something is very wrong with my 1080 setup, need help
2016/06/01 16:44:13
(permalink)
Alright just ran the AMD uninstall cleaner and it removed a lot of previous drives and also ran CCleaner to clean up registry. Uninstalled all Nvidia and will try fresh reinstall. Fingers crossed
|
Heini2
iCX Member
- Total Posts : 498
- Reward points : 0
- Joined: 2014/08/26 17:39:23
- Status: offline
- Ribbons : 0
Re: Something is very wrong with my 1080 setup, need help
2016/06/01 16:49:29
(permalink)
☄ Helpfulby The.Imperial 2016/06/01 17:07:08
The.ImperialAlright just ran the AMD uninstall cleaner and it removed a lot of previous drives and also ran CCleaner to clean up registry. Uninstalled all Nvidia and will try fresh reinstall. Fingers crossed As Sajin and others will suggest, use DDU , not AMD cleaner.
Z170 Sabertooth Mk1 / i7-6700K + NH-D15 / Trident Z (2x16GB)@3000 / 2080Ti XC Ultra / Essence STX II / 950 Pro 512GB / G3 1000W / MG279Q / HAF XB EVO / Win10 X64 Pro
|
The.Imperial
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2014/02/21 03:25:56
- Status: offline
- Ribbons : 0
Re: Something is very wrong with my 1080 setup, need help
2016/06/01 17:01:26
(permalink)
|
TECH_DaveB
EVGA Alumni
- Total Posts : 4893
- Reward points : 0
- Joined: 2008/09/26 17:03:47
- Status: offline
- Ribbons : 46
Re: Something is very wrong with my 1080 setup, need help
2016/06/01 17:03:39
(permalink)
EXCELLENT! Glad to see it is working how it should be. Something hosed in drivers/software can get ya every time.
|
Heini2
iCX Member
- Total Posts : 498
- Reward points : 0
- Joined: 2014/08/26 17:39:23
- Status: offline
- Ribbons : 0
Re: Something is very wrong with my 1080 setup, need help
2016/06/01 17:18:02
(permalink)
Good news! nVidia Experience can/will cause more problems than it's worth.
Z170 Sabertooth Mk1 / i7-6700K + NH-D15 / Trident Z (2x16GB)@3000 / 2080Ti XC Ultra / Essence STX II / 950 Pro 512GB / G3 1000W / MG279Q / HAF XB EVO / Win10 X64 Pro
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Something is very wrong with my 1080 setup, need help
2016/06/01 18:00:18
(permalink)
|
stalinx20
CLASSIFIED Member
- Total Posts : 4977
- Reward points : 0
- Joined: 2009/01/03 08:56:23
- Location: U.S., Michigan
- Status: offline
- Ribbons : 0
Re: Something is very wrong with my 1080 setup, need help
2016/06/01 19:33:35
(permalink)
Heini2 Good news! nVidia Experience can/will cause more problems than it's worth.
Pretty much. Use it as your " personal driver update reminder", and nothing more.
post edited by stalinx20 - 2016/06/01 19:35:38
EVGA X79 Dark 2080 Black edition 980 EVGA 1000 gold PSU (Gold) 4820K CPU 16x G-skill
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Something is very wrong with my 1080 setup, need help
2016/06/01 21:02:40
(permalink)
Would you mind posting another picture of GPU-Z now, or at least look at the physx check box and verify it is checked now.
@stalinx, the only thing I use GFE for is Shadowplay, and I wish it was standalone so I could get rid of this program permanently.
|
The.Imperial
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2014/02/21 03:25:56
- Status: offline
- Ribbons : 0
Re: Something is very wrong with my 1080 setup, need help
2016/06/02 18:46:26
(permalink)
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Something is very wrong with my 1080 setup, need help
2016/06/02 18:54:00
(permalink)
The.Imperial
Perfect. Everything looks much better. Enjoy your card :-)
|
The.Imperial
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2014/02/21 03:25:56
- Status: offline
- Ribbons : 0
Re: Something is very wrong with my 1080 setup, need help
2016/06/02 20:03:12
(permalink)
Yes, running perfectly!!! ty. I can even run Crysis now
|
Hitha
New Member
- Total Posts : 40
- Reward points : 0
- Joined: 2011/07/10 11:18:56
- Status: offline
- Ribbons : 0
Re: Something is very wrong with my 1080 setup, need help
2016/06/08 16:27:26
(permalink)
|
arestavo
CLASSIFIED ULTRA Member
- Total Posts : 6916
- Reward points : 0
- Joined: 2008/02/06 06:58:57
- Location: Through the Scary Door
- Status: offline
- Ribbons : 76
Re: Something is very wrong with my 1080 setup, need help
2016/06/08 18:13:43
(permalink)
|
Hitha
New Member
- Total Posts : 40
- Reward points : 0
- Joined: 2011/07/10 11:18:56
- Status: offline
- Ribbons : 0
Re: Something is very wrong with my 1080 setup, need help
2016/06/08 18:54:52
(permalink)
arestavo
Hitha I just received my SC 1080 and I am not sure if it works perfectly. I know nothing about video cards or what I'm doing. So far I downloaded GPU-Z and it seems like my Bus Interface never changes... its just stuck at 1.1 x16 @ x16 1.1. The only time I saw it at 3.0 x16 was when I ran DDU(before installing the drivers). After I installed PhysX and Graphics drivers only, it just went back to 1.1 x16. http://www.userbenchmark.com/UserRun/1215074 http://www.3dmark.com/3dm/12382434? GPUZ: http://i.imgur.com/HIdvpAE.png Sensors tab: http://i.imgur.com/MoAvhyK.png Please help. Thanks
For the 3DMark score, you are right on target for a stock 1080. The only reason why your overall score seems low is because of for 3770 and the PhysX test (which is run off of the CPU). Your GPU looks good to me! Here's a side by side comparison of your system to mine: http://www.3dmark.com/compare/fs/8734367/fs/8688933
Its good for a stock 1080 but mine is SC, or the difference is pretty small between stock and SC? I still really want to fix the PCI-E to 3.0 x16, I could try a different slot on the motherboard but I don't know if that will do anything.
post edited by Hitha - 2016/06/08 18:58:02
|
arestavo
CLASSIFIED ULTRA Member
- Total Posts : 6916
- Reward points : 0
- Joined: 2008/02/06 06:58:57
- Location: Through the Scary Door
- Status: offline
- Ribbons : 76
Re: Something is very wrong with my 1080 setup, need help
2016/06/08 18:59:37
(permalink)
A stock 1080 vs a stock 1080 SC is not going to be a big difference, to be quite frank. You might see a slight 1-3% increase by getting it to X16 lane speed (that's what I saw with my 980 Ti from PCIE 3.0 X8 to X16). Your motherboard manual should list out what PCIE slot can do what speeds, and what speeds they will be with other slots occupied.
|
Hitha
New Member
- Total Posts : 40
- Reward points : 0
- Joined: 2011/07/10 11:18:56
- Status: offline
- Ribbons : 0
Re: Something is very wrong with my 1080 setup, need help
2016/06/08 19:47:58
(permalink)
Well the only thing I have plugged in is the Xonar Essence STX audio card and the 1080.
|
HeavyHemi
Insert Custom Title Here
- Total Posts : 15665
- Reward points : 0
- Joined: 2008/11/28 20:31:42
- Location: Western Washington
- Status: offline
- Ribbons : 135
Re: Something is very wrong with my 1080 setup, need help
2016/06/08 20:57:22
(permalink)
Hitha Well the only thing I have plugged in is the Xonar Essence STX audio card and the 1080.
GPU-Z shows that PCIe bus speed because the PCIe interface reduces speed when not under a load. If you click on the "?" next to the bus speed, it will run a render test that will load the GPU enough to report your actual full speed PCIe link.
EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
|
Hitha
New Member
- Total Posts : 40
- Reward points : 0
- Joined: 2011/07/10 11:18:56
- Status: offline
- Ribbons : 0
Re: Something is very wrong with my 1080 setup, need help
2016/06/08 21:33:10
(permalink)
HeavyHemi
Hitha Well the only thing I have plugged in is the Xonar Essence STX audio card and the 1080.
GPU-Z shows that PCIe bus speed because the PCIe interface reduces speed when not under a load. If you click on the "?" next to the bus speed, it will run a render test that will load the GPU enough to report your actual full speed PCIe link.
Yea, I already tried that... Nothing changes the Bus Interface :(
|
Sajin
EVGA Forum Moderator
- Total Posts : 49180
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Something is very wrong with my 1080 setup, need help
2016/06/08 22:37:48
(permalink)
Hitha
HeavyHemi
Hitha Well the only thing I have plugged in is the Xonar Essence STX audio card and the 1080.
GPU-Z shows that PCIe bus speed because the PCIe interface reduces speed when not under a load. If you click on the "?" next to the bus speed, it will run a render test that will load the GPU enough to report your actual full speed PCIe link.
Yea, I already tried that... Nothing changes the Bus Interface :(
Try testing the card in another system.
|
Hitha
New Member
- Total Posts : 40
- Reward points : 0
- Joined: 2011/07/10 11:18:56
- Status: offline
- Ribbons : 0
Re: Something is very wrong with my 1080 setup, need help
2016/06/10 20:35:16
(permalink)
Well I just updated the bios and now its always at 3.0 x16, I should be good now
|