Dodester5
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2016/10/18 08:23:54
- Status: offline
- Ribbons : 0
OK , never done this before and i am pretty bad with computers so bear with me . first of all hey everyone :) i recently bought a EVGA GTX 1080 FE for my ASUS ROG G20AJ ( i upgraded it from a GTX -745 ) , installation was no problem i just followed a video. After i installed the card i wiped my old display drivers with DDU then installed the new current driver through Nvidea Ge-force. Now here's where things got a bit weird nvidea boosted all my games up to maximum and i turned on my current game i am hooked on Guild wars 2 i log in no problem then as soon as i get past the first load screen my display turns black and i hear a loud blowing noise coming from the computer ( the card crashed) there is no sound , the computer is on and the caps lock symbol comes up when i press caps lock but i essentially cant do a thing i have to hold the power button to reset it , i try this a couple times and i get the same crash. However when i put the game on all LOW settings i can play it just fine but any time i mess with the settings shaders AA or turn it from sub sample to super sample instant crash the second i hit the option just like before i have to hold the power and start over. I have tried to run several games Killing floor 2 ( crash) Divinity original sin ( crash ) TERA online (crash) but with Fallout 4 and TES Skyrim those two games are the only two that run perfectly fine no crash no nothing i even summoned 600 npcs in skyrim ( got slight fps drop but no crash ) i also summoned 600 alpha death claws in fallout 4 and got lower fps again but no crash at all ) so every single game i run except these two all crash ( also tried The Division and the first time i ran it i was able to play just fine for 10-15 minutes but now when i open it instant crash like the others) oh i also crash on the valley benchmark that came with the disc in the EVGA box if that helps now ive done some reading and i had a few friends try and help because they know computers better than me , i read that fresh installing windows fixes problems with this card but MY biggest problem with that is that when i click Reset PC ( wipe clean re install windows) the card crashes and i cant see my display to finish the reset , it also crashes on loading safe mode system restore and i cant boot from a USB either because it crashes when i do that so im basically stuck and it is real frustrating everything i try crashes the card cant system restore cant reset to factory settings cant boot from usb , i used GPU-Z.1.11.0.exe to check things out and it tells me everything is fine temp is fine power is fine but i can only play 2 games and for whatever reason cant fix anything because my card just crashes so i would really appreciate some help with this if you guys have a minute and have ever heard of something this weird before i am attaching a text of my full system specs if you guys need any more information let me know
------------------
System Information
------------------
Time of this report: 10/19/2016, 19:58:00
Machine name: DECEPTICON
Machine Id: {2DC1BA13-D9D4-45C2-951A-AB4D932E599D}
Operating System: Windows 10 Home 64-bit (10.0, Build 14393) (14393.rs1_release_inmarket.161004-2338)
Language: English (Regional Setting: English)
System Manufacturer: ASUSTeK COMPUTER INC.
System Model: G20AJ
BIOS: 0703
Processor: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (8 CPUs), ~4.0GHz
Memory: 16384MB RAM
Available OS Memory: 16324MB RAM
Page File: 3764MB used, 14990MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 288 DPI (300 percent)
DWM DPI Scaling: UnKnown
Miracast: Available, with HDCP
Microsoft Graphics Hybrid: Not Supported
DxDiag Version: 10.00.14393.0000 64bit Unicode
Card name: NVIDIA GeForce GTX 1080
Manufacturer: NVIDIA
Chip type: GeForce GTX 1080
DAC type: Integrated RAMDAC
Device Type: Full Device
|
Sajin
EVGA Forum Moderator
- Total Posts : 49170
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 17:52:20
(permalink)
Do steps #2 & #5 listed here. Let me know if it helps fix your problems. Make sure you do #5 to all your games.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:14:24
(permalink)
Yes don't use that GeForce experiance thing next time to optimize your games.
If you can't find each game config file just go into settings after stsrting the games and find the graphics setting in the game menu and select defaults and start over setting the game up as you like.. Max or ultra settings or whatever they call it to run it maxed out with the highest settings.. turn the settings down if needed.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:17:26
(permalink)
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
Dodester5
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2016/10/18 08:23:54
- Status: offline
- Ribbons : 0
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:22:04
(permalink)
hey thanks for the reply , i cant try option 2 because i cannot boot into safe mode the card crashes when i try and i cant see my display but i will try number 5
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:24:17
(permalink)
Dodester5
hey thanks for the reply , i cant try option 2 because i cannot boot into safe mode the card crashes when i try and i cant see my display but i will try number 5
You can't get into safe mode?? Did you try to use DDU to Uninstaller the drivers using the safe mode option?
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:27:03
(permalink)
Sounds like Windows is truly messed up. When did the pc problems start? Right after installing the new card or before?
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
Dodester5
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2016/10/18 08:23:54
- Status: offline
- Ribbons : 0
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:28:57
(permalink)
right after i put the new card in i only got it a day or so ago i cant reset pc(return to factory settings) or boot safe mode or system restore or startup repair it all crashes the card cant boot from a USB also it crashes the card (display goes blank no signal)
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:30:53
(permalink)
Btw the normal procedure to install a new graphics card from an old one is to first Uninstall the current cards drivers first. Then turn the system off and remove it and install the new hardwarw.. boot the pc and I still the new drivers.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:33:17
(permalink)
You need to restore the windows 10 from an earlier restore point. I'm not at my pc to hunt for where to find it to direct you.. I'm on the phone. :/
You need to restore windows from an old restore point then Uninstall the Nvidia drivers using DDU.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
Luta Wicasa
Superclocked Member
- Total Posts : 103
- Reward points : 0
- Joined: 2016/07/28 14:33:19
- Status: offline
- Ribbons : 0
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:40:07
(permalink)
Why not just put the old card back and see if you are able to uninstall all you need to. Then install the new card?
|
HeavyHemi
Insert Custom Title Here
- Total Posts : 15665
- Reward points : 0
- Joined: 2008/11/28 20:31:42
- Location: Western Washington
- Status: offline
- Ribbons : 135
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:42:11
(permalink)
Dodester5
OK , never done this before and i am pretty bad with computers so bear with me . first of all hey everyone :) i recently bought a EVGA GTX 1080 FE for my ASUS ROG G20AJ ( i upgraded it from a GTX -745 ) , installation was no problem i just followed a video. After i installed the card i wiped my old display drivers with DDU then installed the new current driver through Nvidea Ge-force. Now here's where things got a bit weird nvidea boosted all my games up to maximum and i turned on my current game i am hooked on Guild wars 2 i log in no problem then as soon as i get past the first load screen my display turns black and i hear a loud blowing noise coming from the computer ( the card crashed) there is no sound , the computer is on and the caps lock symbol comes up when i press caps lock but i essentially cant do a thing i have to hold the power button to reset it , i try this a couple times and i get the same crash. However when i put the game on all LOW settings i can play it just fine but any time i mess with the settings shaders AA or turn it from sub sample to super sample instant crash the second i hit the option just like before i have to hold the power and start over. I have tried to run several games Killing floor 2 ( crash) Divinity original sin ( crash ) TERA online (crash) but with Fallout 4 and TES Skyrim those two games are the only two that run perfectly fine no crash no nothing i even summoned 600 npcs in skyrim ( got slight fps drop but no crash ) i also summoned 600 alpha death claws in fallout 4 and got lower fps again but no crash at all ) so every single game i run except these two all crash ( also tried The Division and the first time i ran it i was able to play just fine for 10-15 minutes but now when i open it instant crash like the others) oh i also crash on the valley benchmark that came with the disc in the EVGA box if that helps now ive done some reading and i had a few friends try and help because they know computers better than me , i read that fresh installing windows fixes problems with this card but MY biggest problem with that is that when i click Reset PC ( wipe clean re install windows) the card crashes and i cant see my display to finish the reset , it also crashes on loading safe mode system restore and i cant boot from a USB either because it crashes when i do that so im basically stuck and it is real frustrating everything i try crashes the card cant system restore cant reset to factory settings cant boot from usb , i used GPU-Z.1.11.0.exe to check things out and it tells me everything is fine temp is fine power is fine but i can only play 2 games and for whatever reason cant fix anything because my card just crashes so i would really appreciate some help with this if you guys have a minute and have ever heard of something this weird before i am attaching a text of my full system specs if you guys need any more information let me know
------------------
System Information
------------------
Time of this report: 10/19/2016, 19:58:00
Machine name: DECEPTICON
Machine Id: {2DC1BA13-D9D4-45C2-951A-AB4D932E599D}
Operating System: Windows 10 Home 64-bit (10.0, Build 14393) (14393.rs1_release_inmarket.161004-2338)
Language: English (Regional Setting: English)
System Manufacturer: ASUSTeK COMPUTER INC.
System Model: G20AJ
BIOS: 0703
Processor: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (8 CPUs), ~4.0GHz
Memory: 16384MB RAM
Available OS Memory: 16324MB RAM
Page File: 3764MB used, 14990MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 288 DPI (300 percent)
DWM DPI Scaling: UnKnown
Miracast: Available, with HDCP
Microsoft Graphics Hybrid: Not Supported
DxDiag Version: 10.00.14393.0000 64bit Unicode
Card name: NVIDIA GeForce GTX 1080
Manufacturer: NVIDIA
Chip type: GeForce GTX 1080
DAC type: Integrated RAMDAC
Device Type: Full Device
Is this what is powering your system? 230W + 180W Adapter for GTX 760? That might be your issue. This is what you have, right? http://www.newegg.com/Pro...sMB8g&gclsrc=aw.ds
post edited by HeavyHemi - 2016/10/19 18:45:01
EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
|
Dodester5
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2016/10/18 08:23:54
- Status: offline
- Ribbons : 0
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:42:26
(permalink)
system restore crashes the card i cant use that , i have ONE idea left but i have been saving it for last because of the time it will take im thinking about putting my old gtx 745 in the computer again THEN re installing windows ( wipe my system ) then re install the gtx1080 again , and i tried option 5 but the games are still crashing :(
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:42:44
(permalink)
Well he may have to do that anyways if he can restore from an old windows restore point since will obviously need the old card in there but yeah worth a shot to just slap the old card in and see if you can do the DDU from the safe mode option.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
Dodester5
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2016/10/18 08:23:54
- Status: offline
- Ribbons : 0
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:43:38
(permalink)
i have a GTX 1080 not 760 i said at the top i just upgraded from a 745 to a 1080 .
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:44:54
(permalink)
HeavyHemi
Dodester5
OK , never done this before and i am pretty bad with computers so bear with me . first of all hey everyone :) i recently bought a EVGA GTX 1080 FE for my ASUS ROG G20AJ ( i upgraded it from a GTX -745 ) , installation was no problem i just followed a video. After i installed the card i wiped my old display drivers with DDU then installed the new current driver through Nvidea Ge-force. Now here's where things got a bit weird nvidea boosted all my games up to maximum and i turned on my current game i am hooked on Guild wars 2 i log in no problem then as soon as i get past the first load screen my display turns black and i hear a loud blowing noise coming from the computer ( the card crashed) there is no sound , the computer is on and the caps lock symbol comes up when i press caps lock but i essentially cant do a thing i have to hold the power button to reset it , i try this a couple times and i get the same crash. However when i put the game on all LOW settings i can play it just fine but any time i mess with the settings shaders AA or turn it from sub sample to super sample instant crash the second i hit the option just like before i have to hold the power and start over. I have tried to run several games Killing floor 2 ( crash) Divinity original sin ( crash ) TERA online (crash) but with Fallout 4 and TES Skyrim those two games are the only two that run perfectly fine no crash no nothing i even summoned 600 npcs in skyrim ( got slight fps drop but no crash ) i also summoned 600 alpha death claws in fallout 4 and got lower fps again but no crash at all ) so every single game i run except these two all crash ( also tried The Division and the first time i ran it i was able to play just fine for 10-15 minutes but now when i open it instant crash like the others) oh i also crash on the valley benchmark that came with the disc in the EVGA box if that helps now ive done some reading and i had a few friends try and help because they know computers better than me , i read that fresh installing windows fixes problems with this card but MY biggest problem with that is that when i click Reset PC ( wipe clean re install windows) the card crashes and i cant see my display to finish the reset , it also crashes on loading safe mode system restore and i cant boot from a USB either because it crashes when i do that so im basically stuck and it is real frustrating everything i try crashes the card cant system restore cant reset to factory settings cant boot from usb , i used GPU-Z.1.11.0.exe to check things out and it tells me everything is fine temp is fine power is fine but i can only play 2 games and for whatever reason cant fix anything because my card just crashes so i would really appreciate some help with this if you guys have a minute and have ever heard of something this weird before i am attaching a text of my full system specs if you guys need any more information let me know
------------------
System Information
------------------
Time of this report: 10/19/2016, 19:58:00
Machine name: DECEPTICON
Machine Id: {2DC1BA13-D9D4-45C2-951A-AB4D932E599D}
Operating System: Windows 10 Home 64-bit (10.0, Build 14393) (14393.rs1_release_inmarket.161004-2338)
Language: English (Regional Setting: English)
System Manufacturer: ASUSTeK COMPUTER INC.
System Model: G20AJ
BIOS: 0703
Processor: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (8 CPUs), ~4.0GHz
Memory: 16384MB RAM
Available OS Memory: 16324MB RAM
Page File: 3764MB used, 14990MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 288 DPI (300 percent)
DWM DPI Scaling: UnKnown
Miracast: Available, with HDCP
Microsoft Graphics Hybrid: Not Supported
DxDiag Version: 10.00.14393.0000 64bit Unicode
Card name: NVIDIA GeForce GTX 1080
Manufacturer: NVIDIA
Chip type: GeForce GTX 1080
DAC type: Integrated RAMDAC
Device Type: Full Device
Is this what is powering your system? 230W + 180W Adapter for GTX 760? That might be your issue. This is what you have, right?
http://www.newegg.com/Pro...sMB8g&gclsrc=aw.ds
No idea where ya see that but if it's in there nice catch.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
Dodester5
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2016/10/18 08:23:54
- Status: offline
- Ribbons : 0
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:45:39
(permalink)
alright then i guess im gonna do that im gonna install my old card then do the wipe then reinstall my new card ill be back later with news if it helped lol
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:46:04
(permalink)
Slap the old card in and see if you can run the DDU and remove all Nvidia drivers then.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
HeavyHemi
Insert Custom Title Here
- Total Posts : 15665
- Reward points : 0
- Joined: 2008/11/28 20:31:42
- Location: Western Washington
- Status: offline
- Ribbons : 135
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:47:03
(permalink)
Dodester5
i have a GTX 1080 not 760 i said at the top i just upgraded from a 745 to a 1080 .
I got that. But, the GTX1080 draws A LOT more power than the GT745.
EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:47:07
(permalink)
But if you do go for a fresh install of windows use the new 1080 for that. Not the old card. The issue is the old drivers conflicting with the new card not an issue with the new card being bad most likely.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
HeavyHemi
Insert Custom Title Here
- Total Posts : 15665
- Reward points : 0
- Joined: 2008/11/28 20:31:42
- Location: Western Washington
- Status: offline
- Ribbons : 135
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:48:43
(permalink)
AHowes
HeavyHemi
Dodester5
OK , never done this before and i am pretty bad with computers so bear with me . first of all hey everyone :) i recently bought a EVGA GTX 1080 FE for my ASUS ROG G20AJ ( i upgraded it from a GTX -745 ) , installation was no problem i just followed a video. After i installed the card i wiped my old display drivers with DDU then installed the new current driver through Nvidea Ge-force. Now here's where things got a bit weird nvidea boosted all my games up to maximum and i turned on my current game i am hooked on Guild wars 2 i log in no problem then as soon as i get past the first load screen my display turns black and i hear a loud blowing noise coming from the computer ( the card crashed) there is no sound , the computer is on and the caps lock symbol comes up when i press caps lock but i essentially cant do a thing i have to hold the power button to reset it , i try this a couple times and i get the same crash. However when i put the game on all LOW settings i can play it just fine but any time i mess with the settings shaders AA or turn it from sub sample to super sample instant crash the second i hit the option just like before i have to hold the power and start over. I have tried to run several games Killing floor 2 ( crash) Divinity original sin ( crash ) TERA online (crash) but with Fallout 4 and TES Skyrim those two games are the only two that run perfectly fine no crash no nothing i even summoned 600 npcs in skyrim ( got slight fps drop but no crash ) i also summoned 600 alpha death claws in fallout 4 and got lower fps again but no crash at all ) so every single game i run except these two all crash ( also tried The Division and the first time i ran it i was able to play just fine for 10-15 minutes but now when i open it instant crash like the others) oh i also crash on the valley benchmark that came with the disc in the EVGA box if that helps now ive done some reading and i had a few friends try and help because they know computers better than me , i read that fresh installing windows fixes problems with this card but MY biggest problem with that is that when i click Reset PC ( wipe clean re install windows) the card crashes and i cant see my display to finish the reset , it also crashes on loading safe mode system restore and i cant boot from a USB either because it crashes when i do that so im basically stuck and it is real frustrating everything i try crashes the card cant system restore cant reset to factory settings cant boot from usb , i used GPU-Z.1.11.0.exe to check things out and it tells me everything is fine temp is fine power is fine but i can only play 2 games and for whatever reason cant fix anything because my card just crashes so i would really appreciate some help with this if you guys have a minute and have ever heard of something this weird before i am attaching a text of my full system specs if you guys need any more information let me know
------------------
System Information
------------------
Time of this report: 10/19/2016, 19:58:00
Machine name: DECEPTICON
Machine Id: {2DC1BA13-D9D4-45C2-951A-AB4D932E599D}
Operating System: Windows 10 Home 64-bit (10.0, Build 14393) (14393.rs1_release_inmarket.161004-2338)
Language: English (Regional Setting: English)
System Manufacturer: ASUSTeK COMPUTER INC.
System Model: G20AJ
BIOS: 0703
Processor: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (8 CPUs), ~4.0GHz
Memory: 16384MB RAM
Available OS Memory: 16324MB RAM
Page File: 3764MB used, 14990MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 288 DPI (300 percent)
DWM DPI Scaling: UnKnown
Miracast: Available, with HDCP
Microsoft Graphics Hybrid: Not Supported
DxDiag Version: 10.00.14393.0000 64bit Unicode
Card name: NVIDIA GeForce GTX 1080
Manufacturer: NVIDIA
Chip type: GeForce GTX 1080
DAC type: Integrated RAMDAC
Device Type: Full Device
Is this what is powering your system? 230W + 180W Adapter for GTX 760? That might be your issue. This is what you have, right?
http://www.newegg.com/Pro...sMB8g&gclsrc=aw.ds
No idea where ya see that but if it's in there nice catch.
That's the power supply used with a GTX 760 installed. It might even be a weaker supply with a GT745.
EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 18:48:54
(permalink)
Yeah 500 watt minimum psu for a 1080.
That's why it's mostly fine till ya game cause when you put a good load on the card it's drawing way too much power for that little psu if you are using less then that.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
Dodester5
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2016/10/18 08:23:54
- Status: offline
- Ribbons : 0
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 19:04:43
(permalink)
to my understanding the 180w. brick powers the main board components and such and the 230w. The gpu i thought 500w. was for whole computer setup not just a card i thought the card itself had a baseline of 180w
|
HeavyHemi
Insert Custom Title Here
- Total Posts : 15665
- Reward points : 0
- Joined: 2008/11/28 20:31:42
- Location: Western Washington
- Status: offline
- Ribbons : 135
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 19:29:00
(permalink)
Dodester5
to my understanding the 180w. brick powers the main board components and such and the 230w. The gpu i thought 500w. was for whole computer setup not just a card i thought the card itself had a baseline of 180w
The GPU alone draws 180 watts. The recommended min of 500 watts is, as you said, for an entire system. What's the rated output for the power brick? Asus lists these options for the power: 180 W Power adaptor 230 W Power adaptor 180 W + 230 W Power adapter Which do you have?
EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
|
Sajin
EVGA Forum Moderator
- Total Posts : 49170
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/19 19:49:05
(permalink)
Dodester5
hey thanks for the reply , i cant try option 2 because i cannot boot into safe mode the card crashes when i try and i cant see my display but i will try number 5
Just use the clean & restart (highly recommended) option in normal mode since you can't reboot into safe mode.
|
Dodester5
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2016/10/18 08:23:54
- Status: offline
- Ribbons : 0
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/20 06:09:28
(permalink)
i have a 180w and a 230w two power supplys
|
Dodester5
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2016/10/18 08:23:54
- Status: offline
- Ribbons : 0
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/20 06:12:22
(permalink)
Well guys im back and heres an update i installed the old card then did a fresh install of windows used ddu to uninstall the previous driver then installed my new card again but now all i get is a pink screen when i turn om computer and then it crashes so. Now i have to think that the card is defective
|
Dodester5
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2016/10/18 08:23:54
- Status: offline
- Ribbons : 0
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/20 07:32:09
(permalink)
just because i want to try everything before i send this in this is my 230w psu my friend is worried because theres little info on it and that this might be the issie here it is have u guys seen this company/charger before if so have you used it? Thanks okaaay it wont let me post any links the brand is Optimum Orbis if you search 230w psu for asus rog g20 aj u can see it
post edited by Dodester5 - 2016/10/20 07:34:47
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/20 08:29:16
(permalink)
I did not know anyone made such small power supplies anymore. Are these things like 15-20 years old??
Miminum psu for a system with a 1080 is 500watts. I'd say grab a 650-750 watt psu just to be good.
Also ps's when old wear out so it may not even be close to its rated specks anymore.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
Dodester5
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2016/10/18 08:23:54
- Status: offline
- Ribbons : 0
Re: PC noob having trouble with GTX 1080 FE please help :P
2016/10/20 08:33:54
(permalink)
The computer is barley a year old i read that i only need a 180w and a 230w to run this card with my comp i researched it before buying 1080
|