EVGA_RobB
EVGA Forum Moderator
- Total Posts : 2665
- Reward points : 0
- Joined: 2011/02/28 17:39:41
- Location: Coruscant
- Status: offline
- Ribbons : 5
PLATINUM PERFORMANCE Introducing the EVGA SuperNOVA 1200 P2 power supply. This power supply raises the bar with 1200W of continuous power delivery and 92% efficiency. A fully modular design reduces case clutter and 100% Japanese Capacitors ensures that only the absolute best components are used. What does that mean? The best stability, reliability, overclockability and unparalleled control. The EVGA SuperNOVA 1200 P2 is the ultimate tool to eliminate all system bottlenecks and achieve unrivaled performance. Click Here for more info!
Attached Image(s)
|
vsg28
SSC Member
- Total Posts : 611
- Reward points : 0
- Joined: 2013/10/23 07:51:14
- Status: offline
- Ribbons : 18
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2014/06/19 09:13:21
(permalink)
Nicely done, Rob! Definitely going to let people on OCN know about this. With the 1300G2 so often available for $160 or so, I would not be able to recommend this over it just yet. Does this has the "eco mode" for fanless under low load operation?
|
aka_STEVE_b
EGC Admin
- Total Posts : 13833
- Reward points : 0
- Joined: 2006/02/26 06:45:46
- Location: OH
- Status: offline
- Ribbons : 69
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2014/06/19 09:29:58
(permalink)
AMD RYZEN 9 5900X 12-core cpu~ ASUS ROG Crosshair VIII Dark Hero ~ EVGA RTX 3080 Ti FTW3~ G.SKILL Trident Z NEO 32GB DDR4-3600 ~ Phanteks Eclipse P400s red case ~ EVGA SuperNOVA 1000 G+ PSU ~ Intel 660p M.2 drive~ Crucial MX300 275 GB SSD ~WD 2TB SSD ~CORSAIR H115i RGB Pro XT 280mm cooler ~ CORSAIR Dark Core RGB Pro mouse ~ CORSAIR K68 Mech keyboard ~ HGST 4TB Hd.~ AOC AGON 32" monitor 1440p @ 144Hz ~ Win 10 x64
|
vsg28
SSC Member
- Total Posts : 611
- Reward points : 0
- Joined: 2013/10/23 07:51:14
- Status: offline
- Ribbons : 18
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2014/06/19 09:37:01
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2014/06/19 17:15:56
(permalink)
I like this one nice to see a new 1200 PSU. I would sill like to see that EVGA 7th PCIe 6 Pin Connector on that back of the EVGA PSU's. And also with a 4 Pin Molex adaptor for some of the older EVGA Motherboards.
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10126
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2014/06/20 06:29:23
(permalink)
This is recommend model for 2 way SLI Classified models with Extreme Intel CPU overclocked.
|
Demonik5150
CLASSIFIED Member
- Total Posts : 3663
- Reward points : 0
- Joined: 2009/01/06 10:33:09
- Location: City of the Dead
- Status: offline
- Ribbons : 11
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2014/06/20 22:17:23
(permalink)
will we be seeing a higher wattage P2 PSU anytime soon ??
|
ManBearPig
CLASSIFIED ULTRA Member
- Total Posts : 5116
- Reward points : 0
- Joined: 2007/10/31 12:02:13
- Location: Imaginationland
- Status: offline
- Ribbons : 20
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2014/06/26 13:07:29
(permalink)
|
Demonik5150
CLASSIFIED Member
- Total Posts : 3663
- Reward points : 0
- Joined: 2009/01/06 10:33:09
- Location: City of the Dead
- Status: offline
- Ribbons : 11
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2014/06/30 18:08:03
(permalink)
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10126
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2014/07/02 04:08:38
(permalink)
In EVGA Europe 1200P2 is only 25e more than 1000P2.
|
PeteTy
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2014/02/01 07:39:58
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2014/08/03 06:01:42
(permalink)
my new asus mb shuts down when i run video profilers (evga 660) unless i disable the anti surge support apparently the 12V on pci bus droops when the card needs that 80A or so you mention nothing about the wire size... or current available at the molex pins note: R on #10 wire is .001 ohms per foot @25C which is about 2mV drop with 6 wires doubled at 1' the wires on that supply dont look like #10 though also i saw a little plug somewhere to put supplemental 12v into the pci buss its small enough to fit in the pci slot under the double wide pci express video cards does the new power supply have some of these connectors? the asus board just says power supply voltage surge shutdown during boot (boot is wrong it runs for hours until i do a video intensive game) no monitor or logging or abilty to set thresholds strictly on/off
|
PeteTy
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2014/02/01 07:39:58
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2014/08/03 06:13:13
(permalink)
well this is one: EVGA - Products - EVGA Power Boost - 100-MB-PB01-BR but it uses the small wire that plugs into the long small wire on the floppy power plug perhaps it should go directly to the power supply your idiot website considers links to your website as spam so cut and paste it into your website to get your website
post edited by PeteTy - 2014/08/03 06:22:21
|
PeteTy
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2014/02/01 07:39:58
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2014/08/03 06:19:09
(permalink)
your idiot website considers links to your website as spam so cut and paste it into your website to get your website
post edited by PeteTy - 2014/08/03 06:23:03
|
golddubby
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2009/10/07 14:57:24
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2018/10/18 05:41:04
(permalink)
Hey! I got a minor issue with my EVGA SuperNOVA 1200 P2 .. the +3,3v sits @2,96 and droops to 2,80v under load, is this normal?
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2018/10/18 06:20:18
(permalink)
golddubby Hey! I got a minor issue with my EVGA SuperNOVA 1200 P2 .. the +3,3v sits @2,96 and droops to 2,80v under load, is this normal?
Being an Old Thread Sunday, August 03, 2014 7:19 AM and all you should have created your own Thread. Are you have Problems with your Computer or just reading the output on a multimeter? What are you using for a Load and how are you testing? Create a Service Ticket is the best place to ask this Question or in your Own Thread. Just Saying.
post edited by bcavnaugh - 2018/10/18 06:32:42
|
Sajin
EVGA Forum Moderator
- Total Posts : 49105
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2018/10/18 10:40:21
(permalink)
golddubby Hey! I got a minor issue with my EVGA SuperNOVA 1200 P2 .. the +3,3v sits @2,96 and droops to 2,80v under load, is this normal?
Sounds like an inaccurate software reading. Use a multimeter to check the voltages while under a load.
|
golddubby
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2009/10/07 14:57:24
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2018/10/18 12:46:04
(permalink)
The readout is from the motherboard, both by utility in windows, and in bios. I do not own a multimeter so I wouldn't know how to check this. But it's a bad thing that it's dropping below 3.3v ? I figured it was when I googled for it. It droops when I put load on the GPU, but not the CPU then it sits on 2,296v~2,294v
|
Sajin
EVGA Forum Moderator
- Total Posts : 49105
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2018/10/18 12:49:13
(permalink)
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10126
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: Introducing the EVGA SUPERNOVA 1200 P2 POWER SUPPLY
2018/10/19 02:37:07
(permalink)
My reading in AIDA64 is 3.312V for 3.3V. HWInfo exactly same reading. 3.312V 5.080V 12.096V Check in these two programs if they show below 3.3 contact EVGA.
|