r_millington
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2015/02/10 16:23:23
- Status: offline
- Ribbons : 0
Re: PrecisionX 5.3.11 Released
2016/05/26 07:19:04
(permalink)
mmark
asslemming 5.3.11 is making my WMI Provider Host service eat up anywhere from 6-10% CPU on Windows 10 64-bit. Completely reproducable. If I shutdown Precision X WMI stops eating CPU and my CPU can throttle down fully.
I have the same problem in W8.1 64-bit. "WMI Provider Host" is always eating up 3-4% CPU. When I shut down EVGA PrecisionX, it goes back to 0%. How do I fix that?
I too am having the same issue with the WMI Provider Host eating up resources (Around 3-4% as well) I have 2 GTX 970 FTW+ in SLI on an ASUS Z97A 32gb RAM and running Win10 64bit (all updated. I would like to get this fixed because when I turn off Precision X my PCH Sensor rises to 58C and when I turn it on my PCH drops to about 50C idle but keeps ramping my CPU - before update everything ran much cooler.
|
albontor
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2016/05/30 08:30:41
- Status: offline
- Ribbons : 0
Re: PrecisionX 5.3.11 Released
2016/05/30 08:33:25
(permalink)
r_millington
mmark
asslemming 5.3.11 is making my WMI Provider Host service eat up anywhere from 6-10% CPU on Windows 10 64-bit. Completely reproducable. If I shutdown Precision X WMI stops eating CPU and my CPU can throttle down fully.
I have the same problem in W8.1 64-bit. "WMI Provider Host" is always eating up 3-4% CPU. When I shut down EVGA PrecisionX, it goes back to 0%. How do I fix that?
I too am having the same issue with the WMI Provider Host eating up resources (Around 3-4% as well) I have 2 GTX 970 FTW+ in SLI on an ASUS Z97A 32gb RAM and running Win10 64bit (all updated. I would like to get this fixed because when I turn off Precision X my PCH Sensor rises to 58C and when I turn it on my PCH drops to about 50C idle but keeps ramping my CPU - before update everything ran much cooler.
I also have the wmi problem, eating about 2-3% of my CPU on W10 64-bit If anyone finds a solution please tell us.
|
eviljolly
New Member
- Total Posts : 44
- Reward points : 0
- Joined: 2007/07/23 19:33:50
- Status: offline
- Ribbons : 0
Re: PrecisionX 5.3.11 Released
2016/06/03 16:27:48
(permalink)
I'm having the same problem with the WMI Provider Host and ended up at this thread. The problem is that for whatever reasons it's causing the WMI Provider Host to create tzres.dll and over again. EVGA devs should be able to figure this out pretty quick. I don't have a solution other than going back to a previous version. Edit: Confirming that 5.3.10 is unaffected by this bug. It's available on the evga precision download page (can't link it, forum removes it). But it's on their main site /precision if you want the url. If you're worried about losing features or introducing bugs. Here are the bug fixes from 5.3.10 to 5.3.11: - Adds OSD support for DX12 Mode in Rise of the Tomb Raider
- Fix OSD On/Off error when changing GPU
- Fix software fan control in SLI mode
- Confirm Apply changes when changing GPU
- Update OSD exclude list
If these things do not affect you, I would revert. Edit 2: Wow, EVGA your forum filters are crazy! I can't even say system 32 in one contiguous word without getting an error! Anyway, tzres.dll is related to time zones, and the mui file is for the language resources, just in case anyone is wondering. It should exist by default in your windows\system 32 directory (no space)
post edited by eviljolly - 2016/06/03 16:48:19
|
Insert_username_here
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2016/05/27 20:02:50
- Status: offline
- Ribbons : 0
Re: PrecisionX 5.3.11 Released
2016/06/11 17:38:09
(permalink)
EVGA_JacobF
z999z3mystorys Ah cool, I take it the Hitman DX12 OSD is gave some problems? still, it's good to see some updates, I'm hoping for something like a UI overhaul that looks a bit like precision X Mobile if for no other reason than to try something new looking :)
Yea, not supported in Hitman DX12 yet, we are working on it.
Are you...working on profiles not saving? I uninstalled Precision and went back to Afterburner. Profile saving is totally broken.
|
ItsBradd
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2015/09/17 07:29:50
- Status: offline
- Ribbons : 0
Re: PrecisionX 5.3.11 Released
2016/06/16 09:02:03
(permalink)
eviljolly I'm having the same problem with the WMI Provider Host and ended up at this thread. The problem is that for whatever reasons it's causing the WMI Provider Host to create tzres.dll and over again. EVGA devs should be able to figure this out pretty quick. I don't have a solution other than going back to a previous version.
Edit: Confirming that 5.3.10 is unaffected by this bug. It's available on the evga precision download page (can't link it, forum removes it). But it's on their main site /precision if you want the url. If you're worried about losing features or introducing bugs. Here are the bug fixes from 5.3.10 to 5.3.11:
- Adds OSD support for DX12 Mode in Rise of the Tomb Raider
- Fix OSD On/Off error when changing GPU
- Fix software fan control in SLI mode
- Confirm Apply changes when changing GPU
- Update OSD exclude list
If these things do not affect you, I would revert. Edit 2: Wow, EVGA your forum filters are crazy! I can't even say system 32 in one contiguous word without getting an error! Anyway, tzres.dll is related to time zones, and the mui file is for the language resources, just in case anyone is wondering. It should exist by default in your windows\system 32 directory (no space)
Cheers, reverting worked, hopefully they can release a fix soon.
|
eviljolly
New Member
- Total Posts : 44
- Reward points : 0
- Joined: 2007/07/23 19:33:50
- Status: offline
- Ribbons : 0
Re: PrecisionX 5.3.11 Released
2016/06/16 16:28:45
(permalink)
ItsBradd Cheers, reverting worked, hopefully they can release a fix soon.
No problem. I see they're saying "The next generation of EVGA PrecisionX has arrived with EVGA Precision XOC." in the GTX 1080 ads. Afaik this only works with the GTX1080 atm. Maybe they're focusing on unifying and bringing this version to all cards, with the features exclusive to the 1080 disabled for others. Who knows, but an official response would be nice. :)
|
Insert_username_here
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2016/05/27 20:02:50
- Status: offline
- Ribbons : 0
Re: PrecisionX 5.3.11 Released
2016/06/16 19:41:00
(permalink)
If that was really the case, you'd think they'd fix the profile saving bug. They should feel really silly at this point. I went back to Afterburner some time ago. No need to screw around with this crap.
|
Dr.Death
FTW Member
- Total Posts : 1011
- Reward points : 0
- Joined: 2016/06/29 19:17:44
- Status: offline
- Ribbons : 9
Re: PrecisionX 5.3.11 Released
2016/06/30 21:01:38
(permalink)
so the only way to get this is through steam ? that's a shame mirror 1 seems broken sure don't want a steam client on my drives is there some reason evga don't serve there own software ??
|
Insert_username_here
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2016/05/27 20:02:50
- Status: offline
- Ribbons : 0
Re: PrecisionX 5.3.11 Released
2016/06/30 21:40:19
(permalink)
Dr.Death so the only way to get this is through steam ? that's a shame mirror 1 seems broken sure don't want a steam client on my drives is there some reason evga don't serve there own software ??
No idea what would make you think Precision is Steam only. http://www.evga.com/precision/ And profile saving is fixed.
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: PrecisionX 5.3.11 Released
2016/06/30 22:05:11
(permalink)
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A  
|
Dr.Death
FTW Member
- Total Posts : 1011
- Reward points : 0
- Joined: 2016/06/29 19:17:44
- Status: offline
- Ribbons : 9
Re: PrecisionX 5.3.11 Released
2016/07/01 06:07:53
(permalink)
what I get every try ?? ''Authenticate at remote partner site failed '' ........... so is it like a after 30 days thing ?? I sure have had some strange things here this week had to register my card 3 times just to get on the Precision site to even try to get to down load ?? [first reg was about a week ago] i'll get over it and keep afterburner if its working foe everyone else i'll scratch my head on it some more way just be a holiday week thing ?? thanks
post edited by Dr.Death - 2016/07/01 06:23:24
|
philipp22
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2016/07/05 06:10:54
- Status: offline
- Ribbons : 0
Re: PrecisionX 5.3.11 Released
2016/07/05 06:25:42
(permalink)
Where can I actually see the monitoring graphs? I only find the monitoring settings. Thanks for your help!
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: PrecisionX 5.3.11 Released
2016/07/09 02:31:25
(permalink)
What is CPU Temperature, CPU Temperature-1 and CPU Temperature-2? CPU Temperature is probably CPU Package, CPU 1 probably Core and what is CPU 2? Software EVGA Precision X 5.3.11. I ask because OSD. I want to know where to look and what is most important of these three readings.
|
Jcapozzi
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2013/11/28 14:14:30
- Status: offline
- Ribbons : 0
Re: PrecisionX 5.3.11 Released
2016/07/11 07:16:59
(permalink)
Anyone else getting update notifications for X16 letting you know there's a new version of XOC? I did today, and what's even stranger, I have update checks turned off. EDIT: Manual "check now" also has the same results, but clicking "Yes" takes you to the 5.3.11 download page, so it's not really trying to update X16 to XOC.
post edited by Jcapozzi - 2016/07/11 09:11:53
|
reallyadriel
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2015/12/27 12:18:47
- Location: Florida, USA
- Status: offline
- Ribbons : 0
Re: PrecisionX 5.3.11 Released
2016/07/11 09:07:32
(permalink)
Jcapozzi Anyone else getting update notifications for X16 letting you know there's a new version of XOC? I did today, and what's even stranger, I have update checks turned off. EDIT: Manual "check now" also has the same results:
Same
|
Steno75
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2013/06/24 09:38:25
- Status: offline
- Ribbons : 0
Re: PrecisionX 5.3.11 Released
2016/07/11 10:49:59
(permalink)
philipp22 Where can I actually see the monitoring graphs? I only find the monitoring settings. Thanks for your help!
same situation :(
|
man4312
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2010/01/24 14:13:20
- Status: offline
- Ribbons : 0
Re: PrecisionX 5.3.11 Released
2016/07/11 16:23:37
(permalink)
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: PrecisionX 5.3.11 Released
2016/07/20 00:27:38
(permalink)
Last few months I only use EVGA Precision X. I like how Framerate target work in older games.
|
Zageron
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2009/08/30 21:00:41
- Status: offline
- Ribbons : 0
Re: PrecisionX 5.3.11 Released
2016/08/12 22:32:03
(permalink)
This is still affecting PXOC. To the point where it blatantly reduces 3DMark scores, as well as keeps my CPU near it's max clock speed instead of allowing for low activity throttling.
|
Bandes
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2011/08/07 08:13:18
- Status: offline
- Ribbons : 0
Re: PrecisionX 5.3.11 Released
2016/10/29 03:29:12
(permalink)
Give it support for battlefield 1
|