aircrewguy
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2010/10/02 11:52:25
- Status: offline
- Ribbons : 0
Yup.. upgraded. Now my 570 doesn't work. My 970 (non SLI) works fine. I have the latest Nvidia drivers. Any ideas?
|
Ramtruck
New Member
- Total Posts : 35
- Reward points : 0
- Joined: 2013/02/22 13:35:57
- Status: offline
- Ribbons : 0
Re: 570 stopped working after windows 10 upgrade
2015/08/04 16:01:48
(permalink)
My computer had to reboot about 3 times after fully installing Windows 10 before everything started kicking in. Until then, post your computer specs and describe your 570 failure with more detail (are the fans spinning, does it have no output? etc.)
|
aircrewguy
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2010/10/02 11:52:25
- Status: offline
- Ribbons : 0
Re: 570 stopped working after windows 10 upgrade
2015/08/04 18:31:43
(permalink)
I've rebooted about 50 times since the upgrade. no error messages, the monitor that was plugged into the 570 didn't work until i put in the 970.... device manager says the card is reporting an error and needs to reboot... that doesn't work. i have a EVGA X58FTW mb with an Intel 950. 18gb of Corsair RAM.
|
aircrewguy
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2010/10/02 11:52:25
- Status: offline
- Ribbons : 0
Re: 570 stopped working after windows 10 upgrade
2015/08/04 18:37:59
(permalink)
|
Pgcmoore
CLASSIFIED Member
- Total Posts : 2037
- Reward points : 0
- Joined: 2011/03/27 09:29:41
- Location: Florida
- Status: offline
- Ribbons : 14
Re: 570 stopped working after windows 10 upgrade
2015/08/04 18:47:44
(permalink)
try this: put both cards in and boot it with your display connected to 970 go to device manager and locate the 570, update driver, BUT! choose the browse option and direct it to the Nvidia folder that has the inf files in it should be similar to this: C:\NVIDIA\DisplayDriver\353.38\Win8_WinVista_Win7_64\International\Display.Driver and force it to update it. then if succesful. unplug the displa from the 970 and plug it into the 560 > reboot see if you get a display
"This program has performed an illegal operation and will be shut down" My Affiliate Code is 05G-UGD-GZVU
|
Pgcmoore
CLASSIFIED Member
- Total Posts : 2037
- Reward points : 0
- Joined: 2011/03/27 09:29:41
- Location: Florida
- Status: offline
- Ribbons : 14
Re: 570 stopped working after windows 10 upgrade
2015/08/04 18:54:04
(permalink)
"This program has performed an illegal operation and will be shut down" My Affiliate Code is 05G-UGD-GZVU
|
aircrewguy
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2010/10/02 11:52:25
- Status: offline
- Ribbons : 0
Re: 570 stopped working after windows 10 upgrade
2015/08/05 08:53:57
(permalink)
After trying that it says "the best driver for this device is already installed." Windows has determined the driver is up to date. on the device manager front page it says "windows has stopped this device because it has reported problems (code43)
|
Pgcmoore
CLASSIFIED Member
- Total Posts : 2037
- Reward points : 0
- Joined: 2011/03/27 09:29:41
- Location: Florida
- Status: offline
- Ribbons : 14
Re: 570 stopped working after windows 10 upgrade
2015/08/05 08:59:13
(permalink)
disable the install windows update drivers in the device manager / advance system settings / hardware tab / device installation / set to no /and install driver from device manufacturer / then try it again,,, also, did you install the update link that was attached?
post edited by Pgcmoore - 2015/08/05 09:02:04
"This program has performed an illegal operation and will be shut down" My Affiliate Code is 05G-UGD-GZVU
|
Pgcmoore
CLASSIFIED Member
- Total Posts : 2037
- Reward points : 0
- Joined: 2011/03/27 09:29:41
- Location: Florida
- Status: offline
- Ribbons : 14
Re: 570 stopped working after windows 10 upgrade
2015/08/05 09:08:27
(permalink)
sorry, I should have advised you to do that, you cant force a driver install if the windows update installer is in the "yes install the best driver for this device" mode it needs to be off to do this...
"This program has performed an illegal operation and will be shut down" My Affiliate Code is 05G-UGD-GZVU
|
aircrewguy
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2010/10/02 11:52:25
- Status: offline
- Ribbons : 0
Re: 570 stopped working after windows 10 upgrade
2015/08/05 09:28:26
(permalink)
Link installed checked no for the auto install for the 570 and the 970. Cant seem to find this in windows 10. device manager / advance system settings / hardware tab / device installation / set to no /and install driver from device manufacturer /. Whats weird is that I have no monitors plugged into the 570, but if I uninstall the driver for it in device manager my second monitor shuts off.
|
Pgcmoore
CLASSIFIED Member
- Total Posts : 2037
- Reward points : 0
- Joined: 2011/03/27 09:29:41
- Location: Florida
- Status: offline
- Ribbons : 14
Re: 570 stopped working after windows 10 upgrade
2015/08/05 09:30:43
(permalink)
when you open device manager its on the left side, but let me double check the kids computer real quick that is weird,, hold on a sec
"This program has performed an illegal operation and will be shut down" My Affiliate Code is 05G-UGD-GZVU
|
Pgcmoore
CLASSIFIED Member
- Total Posts : 2037
- Reward points : 0
- Joined: 2011/03/27 09:29:41
- Location: Florida
- Status: offline
- Ribbons : 14
Re: 570 stopped working after windows 10 upgrade
2015/08/05 09:33:09
(permalink)
my bad, right click my pc you will see two properties, click the top one, then you will see system settings on the left edit: not sure why they did that? must been trying to hide it from us got to leave for a bit, be on later, good luck!!!
post edited by Pgcmoore - 2015/08/05 12:34:47
"This program has performed an illegal operation and will be shut down" My Affiliate Code is 05G-UGD-GZVU
|
agent8
Omnipotent Enthusiast
- Total Posts : 8248
- Reward points : 0
- Joined: 2007/03/03 20:28:24
- Status: offline
- Ribbons : 20
Re: 570 stopped working after windows 10 upgrade
2015/08/05 17:10:54
(permalink)
I remember reading that the 500 series would not be supported when the drivers get auto updated. One of the many reasons I'm staying with Windows 7.
|
Pgcmoore
CLASSIFIED Member
- Total Posts : 2037
- Reward points : 0
- Joined: 2011/03/27 09:29:41
- Location: Florida
- Status: offline
- Ribbons : 14
Re: 570 stopped working after windows 10 upgrade
2015/08/05 17:17:51
(permalink)
we had a similar issues with our Fermi's but we got them to work with 10, hopeful I can get theres working also
"This program has performed an illegal operation and will be shut down" My Affiliate Code is 05G-UGD-GZVU
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: 570 stopped working after windows 10 upgrade
2015/08/07 22:27:26
(permalink)
agent8 I remember reading that the 500 series would not be supported when the drivers get auto updated. One of the many reasons I'm staying with Windows 7.
Do you have a link to that info?
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A  
|
Salty_Sol
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2011/03/20 20:07:26
- Status: offline
- Ribbons : 0
Re: 570 stopped working after windows 10 upgrade
2015/08/14 09:47:02
(permalink)
I have the same issue with a GTX670 FTW and a GTX550Ti that won't work together. According to nVidia's forum the culprit is Win 10 can't load the WDDM mode 2.0 (Win 10) for the Maxwell/Kepler GPU and WDDM mode 1.3 (Win 8.1) for the Fermi GPU at the same time so one loses out. Let us hope a fix is forthcoming. Edit: The link I attached was detached to prevent Spam. So let's try copy and paste from the page: "Windows 10 will not load the NVIDIA display driver for my older graphics card in my PC that has multiple graphics cards NVIDIA provides Windows 10 driver support for our Maxwell, Kepler (select GeForce 600 series, GeForce 700 series and above GPUs) and Fermi class GPUs (GeForce 400 series, GeForce 500 series and select Geforce 600 series GPUs). Maxwell and Kepler GPU architectures support Windows 10 2.0 mode with support for Fermi coming at a later date. At the time of Windows 10 launch, the GeForce Fermi architecture operates in WDDM 1.3 mode. Since it is not possible to load both NVIDIA WDDM 2.0 and 1.3 mode drivers at the same time, you will not be able to mix Fermi class GPU(s) with Kepler/Maxwell class GPUs. If your PC has a combination of both a Fermi class GPU and Kepler/Maxwell class GPU, the WDDM mode that loads will depend on which card will POST first. Please refer to the table below for additional information."
post edited by Salty_Sol - 2015/08/14 09:52:54
|
aircrewguy
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2010/10/02 11:52:25
- Status: offline
- Ribbons : 0
Re: 570 stopped working after windows 10 upgrade
2015/09/22 15:21:15
(permalink)
|
RN@VGA
Superclocked Member
- Total Posts : 173
- Reward points : 0
- Joined: 2008/02/20 10:40:11
- Status: offline
- Ribbons : 0
Re: 570 stopped working after windows 10 upgrade
2015/09/24 16:46:02
(permalink)
This should get fixed when Nvidia releases the DirectX 12 drivers for Fermi later this year, as currently it is not supported yet.
|
aircrewguy
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2010/10/02 11:52:25
- Status: offline
- Ribbons : 0
Re: 570 stopped working after windows 10 upgrade
2015/10/08 12:58:57
(permalink)
Latest driver update fixed it
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: 570 stopped working after windows 10 upgrade
2015/10/08 19:35:43
(permalink)
aircrewguy Latest driver update fixed it
Glad it's fixed.
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A  
|
aircrewguy
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2010/10/02 11:52:25
- Status: offline
- Ribbons : 0
Re: 570 stopped working after windows 10 upgrade
2015/12/12 12:38:37
(permalink)
So the newest Nvidia drivers broke it again . Time to roll back.
|
aircrewguy
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2010/10/02 11:52:25
- Status: offline
- Ribbons : 0
Re: 570 stopped working after windows 10 upgrade
2015/12/12 13:25:41
(permalink)
Rolled back to previous driver with a clean install.... (Deleted for Language) still doesn't work.
post edited by XrayMan - 2015/12/12 14:09:48
|
_Metal_Marine_TIBs
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2012/11/21 20:23:56
- Status: offline
- Ribbons : 0
Re: 570 stopped working after windows 10 upgrade
2016/01/10 08:39:19
(permalink)
My GTX 550TI works but only get half the mhs i used to get and Geforce Experience stopped working it wouldn't connect to network for updates.
|
_Metal_Marine_TIBs
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2012/11/21 20:23:56
- Status: offline
- Ribbons : 0
Re: 570 stopped working after windows 10 upgrade
2016/01/10 08:41:32
(permalink)
Damn Microsoft always think they know what people want
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: 570 stopped working after windows 10 upgrade
2016/01/10 08:58:36
(permalink)
_Metal_Marine_TIBs My GTX 550TI works but only get half the mhs i used to get and Geforce Experience stopped working it wouldn't connect to network for updates.
Please create a new thread if you're having problems with your card.
|
aircrewguy
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2010/10/02 11:52:25
- Status: offline
- Ribbons : 0
Re: 570 stopped working after windows 10 upgrade
2016/01/29 18:53:46
(permalink)
So after the latest driver update computer "blue screens" until I physically remove the card from my system .
|
b4bylon
iCX Member
- Total Posts : 252
- Reward points : 0
- Joined: 2007/09/03 09:07:41
- Location: Romania
- Status: offline
- Ribbons : 1
Re: 570 stopped working after windows 10 upgrade
2016/01/30 13:21:18
(permalink)
1 prevent windows update / automatic uptade from installing drivers 2 download 353.62 drivers from nvidia. 3 go to safe mode and uninstall graphic drivers . manually or use a third party software. ( there is a sticky explaining how to do a clean install) 4 install 353.62 drivers and remember to reboot. it worked for my gtx 460. Also u can downclock ur video card from precision by 105 or something, sometimes it works sometimes it doesnt have any effect. and good luck.
|
aircrewguy
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2010/10/02 11:52:25
- Status: offline
- Ribbons : 0
Re: 570 stopped working after windows 10 upgrade
2016/02/20 10:08:44
(permalink)
Did the above. Doesn't "blue screen" on boot up now, but the 570 still doesn't work.
|