So, tried some OC with msi afterburner with V/F curve, added +25HZ to 1075mV and +13HZ to 1081mV points and got GPU power, temp and voltage limiters activated same time. Did i broke this card or is there somekind of bug somewhere? Core and power limit sliders max position.
 

 
 

No, only when i tweak V/F curve, but i do get constant voltage limit 1 on stock settings and if i slide core&power limit max still get voltage limit 1.
 
Managed to get all 3 limiters kick on with beta 14 too
 
Edit: now i managed to get rid off that voltage limit 1 for little time, and then i got all 3 limiters hitting 1 again(temp got over 50'c), moved points 1075 - 1200mV to same freq point.
 
Messed up, i don't understand this.

I, and most all others, always hit the voltage limit.  It's set in BIOS and you will generally that before the others.  It isn't normal to hit all three at once as I stated before.
 
Try it with the 'Slave' BIOS and see what you read.

I hit that voltage limit 1 deal at stocks right away on 2 out of 4 classified 1080s. It's not normal at stock clocks without touching anything for that to happen.

And yes the same card would toss up all 3 limits for temp,voltage and power. I exchanged those cards at the store I bought it from microcenter.

Even down clocking the last card to -200 on the core it would toss up a voltage limit 1 as soon as there was a load on the card.

I took it as a bad Nvidia chip that shouldn't of past tests and been tossed.

Tempts in the 50s max at the time as well for all 3 limits hit.

Let me add the 2 good cards would never toss up limits ever unless I purposely turned the fan down to near 0 and put a load on it and it would hit 60+ c.

mobsters
I get that voltage limit 1 even downclocked -400MHz that gives me 1595MHz with max core voltage% & power limit%.

Yeah return that card! If that don't say not stable at quoted clocks nothing will!

-200 (1600) was the lowest I could select on the 1080.